Jump to content
SAU Community

Recommended Posts

g'day fellas my bro is looking to sell his 32, mods are as follows.

engine:

s1 rb 25

splitfire coils

blitz injectors

z32 afm

tomei rising rate fpr

garrett 3037s, braided lines

turbosmart 48mm progate

6 boost exh mani

alloy rad

greddy cooler

oil cooler & relo kit, braided lines

fuel:

040 lift pump

044 external pump

alloy surge tank

driveline:

25 box

xtreme drift clutch

nismo 2 way 4.3 ratio

s14 rear cradle, solid offset bushes

solid diff bushes

suspension/handling:

33 brakes all round

project mu handbrake shoes

kazzama castor rods

custom shortened upper arms/nolathane bushes

cusco rear camber & toe arms

tien HA coilovers front & rear

front & rear strut braces

s14 lca's/boxed up

gtr rear swaybar

alloy steering bush

currently running stock 32 knuckles with s14 tie rods & ends

inside:

bride fixed back seat/ok condish. on genuine bride rail

deep dish s/wheel

boost guage

wheels:

front: work 17x9 +11 meshies with 90% ku36's

rear: work equip 18x9.5 +41 with shagged neutons

spares: 4x roh drift R's 18x8.5? + 38? all with 50% neutons

2x 17x8.5? + 28? equip's

2x 18x 8.5? + 30ish equip's, 1 cracked.

other:

3in dump/front pipe, screamer

3in straight through exh

bm44 brake master

ABS removed

wil also come with s14 steer rack with offset spacers which were used before when modded knucles were fitted until rhs one snapped, haha.

broken knucles and a pair of stock 32 one's can be included as well.

cars 70% stripped but will come with stock seats and most trim etc

prob a few bits and pieces missing.

this car has legit rego with this engine but is currently un-rego'd due to using it as a track car, but can be re rego'd if needed.

post-48317-0-73360400-1312797340_thumb.jpg

post-48317-0-10241800-1312798719_thumb.jpg

post-48317-0-02517200-1312798839_thumb.jpg

post-48317-0-81036300-1312798917_thumb.jpg

post-48317-0-55949700-1312798983_thumb.jpg

post-48317-0-66622500-1312799049_thumb.jpg

as for price, 14.5 k but am neg, not keen on swaps or parting it out.

ph 0423387100.

Link to comment
https://www.sau.com.au/forums/topic/373409-rb-25-r-32/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Let large companies that are making money off selling kits do the preliminary engineering for you. If they all do -10, then that is all you'll ever need. 
    • Hopefully it ends up being something manageable, like a hone, rather than a full bore—it would be a huge relief if it’s not as bad as it looks. Hang in there; these setbacks are annoying, but it sounds like you’re handling it as smartly as possible.
    • At the end of the day, it’s all about understanding the odds and being comfortable with the potential cost, whether it’s horsepower on a build or chips on a roulette table. And I have to say, the Laine example made me laugh—some people really do embrace that carefree, “roll and see” attitude!
    • Thanks MBS206, i got that PDF but got abit overhelm with all the connections and tracing of wires. I wasn't expecting to plug the dash harness anywhere. i was just going to use my electronics jumper wires to plug into the right pins like ECU power, ecu ground, ignition trigger etc... I do have a few ratchet straps locking it down tight. Fire extinguisher ready and only a small amount of fuel at a time, enough to submerge the pump.
    • Thanks GTSBoy, i will do abit more digging. I am missing a blue relay near the ECU connector... so i will chase that up in the next few days as well  
×
×
  • Create New...