Jump to content
SAU Community

> T88-34D < $1000 -- NO RESERVE -- Ebay.com.au

a1091156
 Share

Recommended Posts

a1091156 Apprentice

a1091156

Posted
Posted

Here's the link >

http://cgi.ebay.com.au/ws/eBayISAPI...2477115625&rd=1

Any questions, feel free to ask !

I am not a contributing member to this Forum but would like to feel that by offering this product at a once in a time low starting price and informing any Skyline owners who may be sick of 9 sec rotaries :goddam: , that you can leave this post up for anyone who may be seriously interested !

Thanks in advance :uh-huh:

Link to comment
https://www.sau.com.au/forums/topic/40380-t88-34d-1000-no-reserve-ebaycomau/
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Latest Posts

    • MBS206
      Cas issue

      By MBS206 · Posted

      Was that with the cas upside or correct way up?
    • nash47
      Cas issue

      By nash47 · Posted

      Did and sync timing with light 
    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you done the Ignition Sync Wizard in the AEM software?
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • MBS206
      RB25DE NEO with Haltech ECU

      By MBS206 · Posted

      You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
×
×
  • Create New...