Jump to content
SAU Community

damn montoya

siksII
 Share

Recommended Posts

Majanal Grand Master

Majanal

Posted
Posted

Think of the fact that when you drive into a tunnel, any tunnel, you are blinded for a second and then it takes a few secs for your eyes to adjust... add to that F1 cars that can go 0km/h to 200km/h and back to 60km/h in less than 6 seconds and I would really be asking what MS was thinking doing that in the tunnel??? I doubt that Montoya would have had a hell of a lot of time to see shoe especially without the aid of a break light!

Clint32 Mentor

Clint32

Posted
Posted

from the little you could see they were both to blame, but in the end ms was swerving and then broke hard, JMP may have been able to take avasive action and risk crashing but im sure he would rather take his good mate out even if he does crash out himself, not like he is going to win the championship at least some good come of it, was good for a laugh as was alonso.

siksII Grand Master

siksII

Posted
  • Author
Posted

i have a feeling that like someone said, montoya will thinking to himself *suck shit MS i just took you out*... its not like they are the best of buddies anyway!

marjanal, im pretty sure it was the end of the tunnel. (i clearly remember the safety car just about to come out of the tunnel when the accident occurred)

we should organise sau F1 group viewings.. i always have friends over at my place or i go to a friends place and a group of us watch.. then we can sit an argue together :D

Silver-Arrowz Grand Master

Silver-Arrowz

Posted
Posted

Ever been in a dark room then come out to the open? It hurts your eyes and your are momentarily blinded. F1 drivers are also human too. Like I said, it was a combination of bother drivers to make this incident happen. It's apart of racing.

On a side note, loved how Alonzo flipped the birdy while sliding backwards at Ralf. And I think that Jaguar diamond incident was just some PR stunt to get some attention since Jag can't win. It's certainly working.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
    • MBS206
      spot the stagea

      By MBS206 · Posted

      It sounds like you want what the Toyota Landcruisers have for their roof racks. Wanna know what you end up with? Rust holes in the roof, and water everywhere...
    • albyz34gt
      34 de+t conversion using s2 stagea automatic transmission, engine harness and ecu

      By albyz34gt · Posted

      Discovered today that if I select reverse first and take my foot off the brake, then select drive, the drive indicator light works and so does the tiptronic gear indicator. 
    • albyz34gt
      34 de+t conversion using s2 stagea automatic transmission, engine harness and ecu

      By albyz34gt · Posted

      Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Does anyone here have any ideas?   Cheers guys
×
×
  • Create New...