Jump to content
SAU Community

Recommended Posts

PRICE DROP FROM $9000! I will not go any lower than $7500! Consider the price $9k, but then i've done the haggling for you. Swaps considered, preferably for a fuel efficient car.
-----------------------------------------------------------------------------------------------------------------------------------------------
Make:
Subaru
Model:
WRX
Year:
1998
Kms:
286000
Registration:
OYL-802 (exp. 13/05/13)
Location:
Northcote, VIC
Contact:
0431320142 or PM
Price: $7500 FIRM!! or swaps
-----------------------------------------------------------------------------------------------------------------------------------------------
Engine:
EJ20k. Rebuilt at 241000kms (44000kms old), with reciepts.
VF22 turbo with turbo beanie
Walbro GSS342 fuel pump
ASI silicone intake
K&N Panel filter
90mm PVC intake trumpet on standard airbox
3" Xforce turbo back exhaust, dump pipe heat wrapped, into a Hitech single tip oval muffler

The engine seems to be in great condition and goes very well. There doesn't appear to be any engine leaks or weird noises.

Driveline:
V4 STI 5 speed gearbox and diffs (4.44)
Standard spec. organic clutch

The gearbox seems to be in good condition, with no real grinds or anything. It sometimes feels like it could engage 2nd easier, most likely due to worn shifter bushes... the shifter is quite sloppy. There appears to be a bit of a leak from the very rear of the gearbox and is most likely due to a worn output shaft seal. I'm very conscious of the gearbox when driving, and never launch or shift hard.

Suspension
BC BR gold series coilovers (less than 5000kms old)
BC adjustable camber tops front and rear
Whiteline 24mm rear sway bar (standard front)
Street/aggressive alignment by Centreline Suspension

The car handles really well.

Brakes
GD 4 pot front calipers (painted black) with standard rotors
Intima SR front brake pads
Standard single pot rears (painted black)

I broke part of the right hand side handbrake assembly when upgrading the brakes, so had to remove it from the hub. My handbrake therefore does not work at the moment. It hasn't bothered me so far, but i did plan to either fix the assembly, find a spare one, or install a hydraulic handbrake. The Intima SR pads are pretty new and are suitable for temps up to 700C (ie. track).

Wheels and Tyres:
16x7" MY98 WRX 5 spoke wheels
Bridgestone RE001 tyres (205/50r16)

Tyres are in pretty good condition, as are wheels.

Exterior:


Standard except for:
MY99 headlights
MY99 grill (needs to be colour coded)
MY99 rear spoiler (needs to be colour coded)

The body is pretty straight, with the odd small bump here and there. The car has been resprayed at some stage and looks pretty good when clean. There is however some area where the clear coat has blistered. The roof has completely lost it's clear coat. The boot has a blister of about 20x20cm and the rear a-pillar has one of about 7x20cm. I've also just added a MY99 grill and spoiler, and these have just been quickly rattle canned black. I could help organise paint repairs and colour coding for around $500.

Interior:
Fire extinguisher mounted on transmission tunnel, below rear seat
Pioneer head-unit
Kenwood 6" front speakers
Pioneer 6"x9" rear speakers
Pioneer amp
Grey cloth on seats has been dyed black

The interior is in pretty good condition.
-----------------------------------------------------------------------------------------------------------------------------------------------
Above is a description of how the car will be setup when sold. The car currently has additional modifications fitted (which will be removed before sale). These include:

Power FC and hand controller, tuned by Pro-Tek Automotive for e85
Eboost street (40psi)
Five-O-motorsports 1000cc sidefeed injectors
V4 STI 90mm AFM
Car makes 217kw ATW with this setup

... with the standard ecu, etc, fitted the car won't be making 217kw, but should be making good power over stock due to the VF22, exhaust, and intake. The handling and braking capability is much better than stock too. Even without 217kw, it's still a quick, great handling and stopping street car that could handle the track too.

Let me know if you'd like the car in it's current modified state! ($9000 FIRM)

-----------------------------------------------------------------------------------------------------------------------------------------------
20130222124219.th.jpg20130222134555.th.jpg20130222134204.th.jpg
20130222123022.th.jpg20130222122421.th.jpg20130222124100.th.jpg
20130222134310.th.jpg20130222124410.th.jpg20130222115057.th.jpg
20130222134353.th.jpg20130222134657.th.jpg20130222134144.th.jpg
20130121151603.th.jpg20130121151639.th.jpg20130121151647.th.jpg
-----------------------------------------------------------------------------------------------------------------------------------------------
I don't really want to sell my car... I've spent quite a bit of time and money on the car in the last 12 months. Unfortunately though, a decision to further my study this year means I don't think i can afford to hang onto it. My build thread (link below) should give you some good info on the car. I don't think it would need much for a roadworthy. It passed a RWC less than a year ago. If you have any questions, or would like to check it out, please don't hesitate to contact me.

**** If you really want the car for less than $7500, I could remove a few more parts, however replacement parts will not be fitted. I could remove the following parts: Exhaust (minus $500), Rear swaybar (minus $100), Front brakes ($400), Wheels/tyres (minus $250), Coilovers (minus $700), Turbo (minus $400), MY99 headlights (MY98 ones re-fitted - minus $200).

Build Thread: http://www.rexnet.com.au/forum/index.php?/topic/159516-plain-green-my98/

Edited by jimtron4000
  • 3 weeks later...
  • 3 weeks later...
  • 2 weeks later...

Handbrake will be fixed. A BPM intercooler will be fitted if purchased with Power FC, etc. If the buyer wants the car in a closer to standard state, an STI ecu, injectors and AFM could be supplied/fitted for an extra cost.

  • 2 weeks later...
  • 2 weeks later...

AD UPDATED!!!

----------------------------------------------------------------------------------------------------------------------------------------------
(03/05/13) I've just had the car in at Protek where I had the handbrake fixed, gearbox leak (rear extension housing) fixed, Engine and gearbox oil change, and roadworthy inspection ($884). I've also just added 6 months registration ($290)
----------------------------------------------------------------------------------------------------------------------------------------------
Make:
Subaru
Model:
WRX
Year:
1998
Kms:
292000
Registration:
OYL-802 (exp. 13/11/13)
Location:
Northcote, VIC
Contact:
0431320142 or PM

Price: Prices are absolutely FIRM. I had already reduced the prices as low as I would go, and have since spent $1100 on it.

$6500 Standard: turbo, ecu, injectors, AFM, TMIC, exhaust.
$7000 VF22, STI ecu/AFM/injectors.
$7500 VF22, STI ecu/AFM/injectors, 3" TBE.
$8000 VF22, STI ecu/AFM/injectors, 3" TBE, BPM TMIC.
$9000 In its current modified form.

+$500 for paint repairs
+$1000 V6 STI front bar and lip painted/fitted, plus paint repairs

WILL CONSIDER TRADES!
Preferably s13/14/15's, rx7's, etc, but will consider others. Can add some cash on top for the right trade.

RWC: I can supply a RWC at the buyers expense. The following items have been identified as needing addressing:

-1 seat belt has some fraying. I was advised this could be fixed with a lighter.
-Exhaust too loud and too low. Temporarily fitting a standard one would be cheapest/easiest option.
-Rear diff slightly weeping oil. I was advised that washing it would be fine.
-Rear bar loose. I had a tow bar removed and apparently some bolts were not but back in place. Easy fix!
-Brake lines aren't clipped to coilovers.
-Front swaybar link bushes need replacing.
-LHF wheel bearing needs replacing. A secondhand hub could be the cheapest/easiest.
-Wiper blades.
-LHF power window too slow. It seems fine to me. I was advised just to lube it up.

--------------------------------------------------------------------------------------------------------------------------------------------
Engine:
EJ20k. Rebuilt at 241000kms (44000kms old), with reciepts. Making 217kw ATW.
Power FC and hand controller, tuned by Pro-Tek Automotive for e85
Eboost street (40psi)
Five-O-motorsports 1000cc sidefeed injectors
V4 STI 90mm AFM
BPM TMIC (not in picture)
VF22 turbo with turbo beanie
Walbro GSS342 fuel pump
ASI silicone intake
K&N Panel filter
90mm PVC intake trumpet on standard airbox
3" Xforce turbo back exhaust, dump pipe heat wrapped, into a Hitech single tip oval muffler

The engine seems to be in great condition and goes very well. There doesn't appear to be any engine leaks or weird noises.

Driveline:
V4 STI 5 speed gearbox and diffs (4.44)
Standard spec. organic clutch

As with most wrx's, the shifter is pretty sloppy. A set of shifter bushes would rectify the problem.

Suspension
BC BR gold series coilovers (less than 5000kms old)
BC adjustable camber tops front and rear
Whiteline 24mm rear sway bar (standard front)
Street/aggressive alignment by Centreline Suspension

The car handles really well.

Brakes
GD 4 pot front calipers (painted black) with standard rotors
Intima SR front brake pads
Standard single pot rears (painted black)

Pulls up very well. The Intima SR pads are pretty new and are suitable for temps up to 700C (ie. track).

Wheels and Tyres:
16x7" MY98 WRX 5 spoke wheels
Bridgestone RE001 tyres (205/50r16)

Tyres are in pretty good condition, as are wheels.

Exterior:
Standard except for:
MY99 headlights
MY99 grill (needs to be colour coded)
MY99 rear spoiler (needs to be colour coded)

The body is pretty straight, with the odd small bump here and there. The car has been resprayed at some stage and looks pretty good when clean. There is however some area where the clear coat has blistered. The roof has completely lost it's clear coat. The boot has a blister of about 20x20cm and the rear a-pillar has one of about 7x20cm. I've also just added a MY99 grill and spoiler, and these have just been quickly rattle canned black. I could help organise paint repairs and colour coding for around $500. *** I've just picked up a V6 STI frontbar and lip that i could supply/fit/paint at an additional cost.

Interior:
Fire extinguisher mounted on transmission tunnel, below rear seat
Pioneer head-unit
Kenwood 6" front speakers
Pioneer 6"x9" rear speakers
Pioneer amp
Grey cloth on seats has been dyed black

The interior is in pretty good condition.

Edited by jimtron4000
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...