Jump to content
SAU Community

Recommended Posts

I am selling my 180sx with a whole lot of mods:

Mods are:

* LSD

* BC Coilovers (all 4 with adjustable heigh and damper)

* Front and rear strut braces.

* Rebuilt SR20det redtop engine - ACL bearings - Forged pistons, rods and rings - Metal gasket kit - Tomei adjustable cams - Reseated valves - t28 low mount turbo - Front Mount Intercooler (with polished 3inch piping) - Dual stage bof - nismo 550cc injectors - 750hp fuel pump - Rising fuel rate reg - SR20 computer with nistune (running 13psi) - oil + boost pressure gauges - nardi drift steering wheel - relocated radiator overflow bottle with thermo - PIL oil catch can and all new lines that are either braided or blue silicone. - Relocated oil filter. - Cold air intake running up to a K+N pod filter. - Drift style mechanical handbrake.

It has been painted in a light blue bottom half with a slight gold pearl, with the bonnet and roof painted black.

I have been told by the previous owner that this car has been built to easily handle 20psi and reached 355hp on the dyno on 20psi. I have owned this car for around 4 months, but i am looking to sell it and another car to move into something bigger and newer. 180 has been set up for the track and drift, but has never seen either yet, i have only driven on a weekend basis and havent had any problems.

I havent done any of this work, so i dont have any receipts for the work done, only the word of the previous owner.

I dont want any joy riders or test pilots, test drives only when i see you have the cash. NOT looking for any swaps for anything!!

Photos wont upload at the moment, so please call or message me anytime on 0402 493 150 .. and i am looking for offers around $14,000

post-101149-0-82447000-1362382633_thumb.jpg

post-101149-0-64563900-1362382635_thumb.jpg

Edited by famous33
  • 3 weeks later...

any offers??

would like this gone as it just sits in my garage taking up room, and it should be getting driven !!

no reasonable offers considered

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
    • Also wanted to say, my new spark plugs are blackened looks like it's very rich. I have splitfire coilpacks but stock coilpack loom and ignitor. I tried directly grounding the ignitor ground to body as well. 
×
×
  • Create New...