Jump to content
SAU Community

Recommended Posts

Late model BNR32 Seats in very good condition.

No rips, tears, marks, ciggerette burns.

$900 Or Nearest Offer.

BNR32 440cc Injectors, good upgrade for RB20's and CA18's.

$250 Or nearest Offer.

*****************SOLD************************

18x8.5/9.5 BIM Zeit RR Rims 5x114.3

Tyres are Bridgestone P-Zero on rear, Falken's on front. Have some tread, but are not brand new, on the other hand they arn't bald. They are silver in colour. Offset's to suit Skyline or similar. Pictures on: http://www.bim-cs.com/products/rr/ Condition: used but no damage, some rims have some slight marking around the edges, nothing too major, or even visible until you look very close. Prices reflects the used condition.

$1500 ONO

Located on Brisbane Southside.

Email me at [email protected]

Link to comment
https://www.sau.com.au/forums/topic/43152-fs-18-wheels-gtr-seats-and-injectors/
Share on other sites

Late model BNR32 Seats in very good condition.

No rips, tears, marks, ciggerette burns.

$900 Or Nearest Offer.

BNR32 440cc Injectors, good upgrade for RB20's and CA18's.

$250 Or nearest Offer.

18x8.5/9.5 BIM Zeit RR Rims 5x114.3  

Tyres are Bridgestone P-Zero on rear, Falken's on front. Have some tread, but are not brand new, on the other hand they arn't bald. They are silver in colour. Offset's to suit Skyline or similar. Pictures on: http://www.bim-cs.com/products/rr/

$1500 ONO

Located on Brisbane Southside.  

Email me at [email protected]

do the injectors fit straight onto a RB20 fuel rail? and do you need aftermarket management for them to run propperly?

Sorry for the noobieness :) just not real sure on these things.

Ta

Yeah, what he said.

Stock RB20 are like 270cc, these are 444cc, so 64% more flow, without getting the standard ECU chipped to say it has the larger injectors, or an aftermarket ecu your car will run too rich.

You can alternativly use a piggyback like a s-afc but they can only adjust like 30% either way.

They do however fit into the standard fuel rail on RB's and CA's, which makes them a pretty easy upgrade.

Yeah, what he said.

Stock RB20 are like 270cc, these are 444cc, so 64% more flow, without getting the standard ECU chipped to say it has the larger injectors, or an aftermarket ecu your car will run too rich.

You can alternativly use a piggyback like a s-afc but they can only adjust like 30% either way.

They do however fit into the standard fuel rail on RB's and CA's, which makes them a pretty easy upgrade.

What advantages do you get from running bigger injectors in terms of power?

like would i need to be running more boost in order to notice the difference?

What sort of rwkw's could these injectors handle ?

Thanks

What advantages do you get from running bigger injectors in terms of power?

like would i need to be running more boost in order to notice the difference?

What sort of rwkw's could these injectors handle ?

Thanks

Bigger injectors flow more fuel.

You only need to get bigger injectors if your current ones are maxxing out, but from the sounds of it, they won't be.

In a CA they will push about 200-220 rwkw in a tuned state, stock CA's have 370ccx4 (1480), RB20's have 270ccx6 (1620cc), so 444cc's in an rb20 would probably be enough to push the limits of the stock internals.

Smaller injectors are easier to tune for, when they get too big tuning becomes a bit harder (for idle etc).

Hope that helps.

Bigger injectors flow more fuel.

You only need to get bigger injectors if your current ones are maxxing out, but from the sounds of it, they won't be.

In a CA they will push about 200-220 rwkw in a tuned state, stock CA's have 370ccx4 (1480), RB20's have 270ccx6 (1620cc), so 444cc's in an rb20 would probably be enough to push the limits of the stock internals.

Smaller injectors are easier to tune for, when they get too big tuning becomes a bit harder (for idle etc).

Hope that helps.

my microtech computer will be in soon and will be running close to a bar of boost. no higher as still stock turbo. but i was keen on getting a GTR fuel pump with injectors. should i?

Yeah why not??

Sorry mate, this is a FS thread, I'm happy to answer questions about the condition and what not of the stuff forsale, but if you want advice about your own mods you should use the search button, I'm sure your question has already been answered multiple times on this board alone, little alone the numerious other car forums.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...