Jump to content
SAU Community

Recommended Posts

RB26 ARIAS Forged pistons.
Used for one dyno session then removed, nothing wrong with them.
86.5mm
8.1 compression

$800

o2fs.jpg

0v69.jpg
j7vza.jpg
8scp.jpg
RB26 ATI Super Damper Balancer #918599
Not much use
$350
vg3o.jpg
35c0.jpg
Pair of R32/S13/R31 REAR ISC base height adjustable N1 Coilovers
No leaks or knocks in good working condition.
$400
ks5f.jpg
5jt6x.jpg
2x 50% Hankook Z221 Semi Slicks in the C70 (soft) Compound 235/45/17 these have been stored correctly out of the sunlight and elements.
These tyres sell for $400 ea RRP
$400 for the pair.
2cyk.jpg
r8bl5.jpg
R32 GTST straight through Turbo back 3'' mild steel exhaust with 5'' tip modified Varex oval muffler and fake cat.
Comes with 3'' dump pipe to suit low mount spaced out turbo needs flange/v band welded on.
In place of the cat, there has been a pipe with the heat shields welded onto it (makes it look like there is a cat there still)
Varex muffler has had a 5'' stainless tip welded onto it comes with control box and hard wired rocker switch.
this system is perfect for a street car, with the varex you can go from being loud, to almost stock sound with the press of a button
$650
nwv35.jpg
3uev.jpg
m3pr.jpg
4brl.jpg
Located in Adelaide S.A (can post everything on here at buyes expense)

hey mate do u know the wat kg springs are in those coilovers? would u post to qld? please contact me on 0421314199 thanks john.

hey mate these are 6kg springs, happy to post.

Thanks

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...