Jump to content
SAU Community

Recommended Posts

OK first off, I know its short notice.

But I'm not expecting a huge turn out for it :) Couple of us from the whorethread decided to cruise this weekend and we thought we would be nice and invite a few others that might want to come :)

Cruise Details:

Meeting point: Thornleigh McDonalds.

Time:10am for a approx 11am departure

Date:13/11/05

Destination:Wollongong

Not sure where the best place in the gong to stop is, probably depends on how many cars we have at the time, find some where to park and have a bite to eat.

Re-Group(s)

We will have a re-meet point at Krispy Kremes near liverpool at approx 11:30.

stay for about 15 minutes or however long it takes for everyone to catchup. Incase they get stuck in traffic or at lights etc..

if you bring a CB, and I highly recommend you do, we will be using channel 25.

Please register intrest :(

so far people attending are..

Sl!m + another car

Craved + another car

Miss Turbo

BWA

Wilch

Shaolin + another car

Scathing

Menthu_Rae

N1GTR

Suspense

Satanic

MAR55S

JAS-25T

smasha

RUKUS!!!!!!

henzie + more cars

DRIFTER + more cars

A NewTattoo

tommyk

oldmangana

Maybe-

Mass_iv + friends

Silver Gts-t

tomm0

gts25x

Wink

Link to comment
https://www.sau.com.au/forums/topic/94296-cruise-to-the-gong/
Share on other sites

  • Replies 220
  • Created
  • Last Reply

Top Posters In This Topic

how does....

pennant hills road ...

cumberland highway..

then right towards liverpool (rd name unsure)

then onto the highway to the picton exit..

and most people know the rest of the way..

hows that sound?

Yep, Macquarie Pass.

Albion Park, at the base of the Pass, is about 20-30 minutes south of Wollongong. And the pies at Robertson (at the top of the Pass) are some of the best I've ever had.

Edited by scathing



  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...