-
Posts
75 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by hoo@h
-
-
I hope the guys at 101 realise that if you don't use the diodes and the igniton interface module, you get a the check engine light constantly illuminate on the R34's....it doesn't effect anything, just is annoying to see.
kewl. just orded emanage ignition signal adaptor online, so is that all I need to turn those engine check light off? 666dan?
"GReddy e-manage Ignition Signal Adapter #1 - #15900906*
(For Nissan Skyline ER34 & Stagea WGNC34)
When attaching the ignition harness neo-straight 6 cars (ER34, WGNC34, etc), this adapter will prevent the check engine light from turning on.
Attach to each igniter signal on the ECU side, as well as to the ground.
Up to 6CH
D
-
I hope the guys at 101 realise that if you don't use the diodes and the igniton interface module, you get a the check engine light constantly illuminate on the R34's....it doesn't effect anything, just is annoying to see.
Well, got my car back and that's exactly what I got, engine warning light is on, very annoying.
So hard is it to get the warning light back to normal, can you help me out 666dan?
btw, car made about 270 hp with emanage blue, fmic, blitz filter, exhaust and blitz i-color set at 0.9 high boost.
-
Hey Hoo@h, you said you've gone back to E-manage blue after you couldn't get the Ultimate to work. Just out of curiosity is it possible to use the same harnesses for the E-manage blue for the E-manage Ultimate? Or do you need to buy Ultimate specific harnesses?
"There's very little meat in these gym mats!"
Hmmm not sure. I know if you were upgrading from blue to ultimate u will need to buy additional harness, so I assume it will work perfectly going backwards, just with a few wiring left out.
I haven't actually seen it yet, only talked to the guys at 101 briefly over the phone. I am hoping to pick it up this weekend, if they can sort out the misfiring problem at high boost (one or more coilpacks need replacing I think).
Dan
-
This ECU can be used on R34s with Tiptronic transmission?
Can someone list the benefits of this one over say an SAFC2? I'm currently running one and wouldn't mind looking into an upgrade.
From my minimum mechanical knowledge.
I had SAFCII on the 34 auto before, it was pretty good but it only works on air n fuel ratio tuning, with the emanage(latest firmware n software) u can also tune the ignition timing which will give you a bigger gain in power.
Unfortunately PowerFC don't work with the 34 auto, otherwise I would have gone that way.
-
Well, all jumper setting are listed in the user manual, perhaps they thought they had it on Nissan setting.
They did contact 101 and got the latest software, but I guess attempting to tune the car with wrong jumper setting killed it.
Anyway, I think 101 got the car running with emange blue so I am just going to leave it as that for now.
Thanks for the offer 666Dan, you wouldn't happen to be in Brisbane area are you?
-
the jumper setting alone doesn't kill the e-manages....it would take some highly suspect installation to kill one.
I've seen an e-manage appear "dead" purely from incorrect firmware.
Well, I’m not a mechanic so I wouldn't know much about it I was been told it had fried because the jumper was set to Honda Vtec instead of Nissan (don't how they can stuff that up).
The guys at 101 put the emanage blue on my car now and it works fine, so I will leave it as that for now and the E-ultimate will be setting on my desk as a nice shinny chrome souvenir for the time been perhaps give ultimate another crack bit later on down the track, when everyone is running one in their auto.
-
was the unit new when u gave it to the workshop? they should replace it surely as it was their fault it is no longer working, due to bad installation
yeah, bought it from Japan brand new. I guess I will take it back to MM sometime and see what they can do. I doult they will do anything though and they charge me for the installation as well.
-
Hi Guys
I had my car at MM a while ago to get the emanage ultimate installed on the r34 GTT auto but they can't get it to work.
I decide to take my car to 101 since they are suppose to be the ECU guys in Brisbane, and they tested my E-ultimate and told me that the unit is dead, because MM didn't set up the jumper correctly (setting for Nissan car) before they hook up everything and turn on the ignition.
So FYI, find out if the workshop really knows what they doing before going ahead. E-Ultimate is pretty much like the emanage blue but with 3 times the information, so its very easy to #$@% up if not careful.
D
-
engine mounts seem to become very easily lose on the rb20.. mine were finger tight.. worth a check.
But if its engine mount lose, shouldn't it do it all the time not just when Engine is warm up?
-
have had this shutter too for about 2.5years
only appears when the engine is warm, and is worse when the engine is hot
...but doesn't seem to be so bad when its a cold day
tried to change:
- spark plugs
- all coils
Waz.
hmm. bugger. so changing the coil didn't fix the problem. I was seriously thinking of picking up a 6 pack splitfire coil n replace them all and hoping for problem solved. But I guess I will have to look else where.
Anyone else got the same problem and had it sort it out?
-
Hi all
Recently have a problem with the car
When the car is idle, it would sometimes shudder/shake for about 1/2 second
This can occur randomly at idle and makes no sounds
Any suggestions at what it could be ?
Thanks
Eric
Got the same problem with my 34 GTT. It only seem to show when car is warmed up. When the oil temperture pass 90 degree and sitting idle the random shake and you can hear spluttering sound from the exhaust.
-
-
Willing to swap for a set of white AVIS rims?
Already got a sets of 18" 2 piece Jap rims on the car. the factory 17" are just sitting in my garage atm. Thanks for the offer tho.
Dan
-
-
Factory R34 17" with tyres up for sale. 2 of the tyres are brand new and the others are around 60%, have scratch on them when it came with the car.
After $800 ONO, local buyer prefer. I'm in Brisbane.
email me if you are interested. [email protected]
-
thanks boys.....just making sure they wernt too good to be true
yes they are good.
I bought the Blitz sbc i-color n the emanage ultimate from them and they were willing to translate the manual into English for me, if I fax them the Japanese manual.
D
-
hoo@h: So what car do u drive man so next time i can give u a wave.
sweet dude.
silver r34 4 door with the nismo kit. My car still at mercury motorsports tho. It's been there for 2 weeks now.
-
anyone in brisvegas with these???
I got a set of stock 17" r34 gtt wheel with tyre and I'm in Brisbane, if you still looking for them.
-
The latest news from MM this morning, sad but true.
The final decision has been made, the guys at MM had tried their best and had contacted all the people they known but still can't get it to work.
Basically, when they connect up the whole unit to the ECU, the car runs rich at start and as the car warm up it start to run thin and then the engine will cut out, plus the auto assist goes funny, when they put the car into drive, it always start in 3rd gear not 1st. And please don’t comment on the technical ability of MM, unless you have successfully done the installation and tuning of the “Emanage Ultimate” on a R34 GTT automatic.
So unfortunately, we are calling it a quit today, there's no point of dragging it on without any more information. So on till there's more info available for the ultimate unit n GTT auto setup, then I shall bring my car back to the workshop.
Please let me know if anyone else has the unit and had it working with R34 GTT automatic in the future.
Good luck Nox, hope you can get yours to work, and please inform us if you do get yours working.
-
so are you saying the installation manual is incorrect for the skyline(s)?
surely MM can follow wiring instructions?
Well, I actually print out the whole english manual for them, I guess either the wirediagram is bit hard to follow or they never read it. I don't know.
At least everything is hooked up now and the car starts, will Have to see what else can go wrong and hopefully getting my car back before this weekend.
Hey Nox, are you in Brisbane as well? Have you decided on which place to go to get your ultimate install? I guess MM will be the best place to go once they get my lab rat sorted. Coz by then, they will know how to wire up and what will go wrong.
-
What's with this thread???????????
hoo@h has his car at Mercury Motorsport on the 26th August and they still have it. Now the guys at Mercury ain't inexperienced with Skylines and they couldn't get the EManage to work in 10 days of trying. For a product as expensive as EManage that seems a little excessive to me.
I don't think I will ever seriously look at an EManage as a solution for tuning on any of my cars.
cheers
well, they gave me a quato of one or two days to get it fitted and tune, but endup been almost two weeks now.
I guess because the Emanage ultimate now have all these new stuffs to work with auto, the wiring of fuel+ignition+ auto assist got complicated or something. I don't know, not a tech head myself.
Anyway, will have to see if the result is any better than say a blue Emanage.
-
OK just some update on the progress of emanage ultimate...
Got a call from Trent at Mercury Motorsport over the weekend, He say they finally got the car started with the unit installed, now they just need to do the tuning and hopefully they won't be too much drama in that department.
Trent told me it was pretty much the 1st emanage ultimate installation in QLD, not sure if he meant on GTT or all car, as they were trying to compare notes with other technicians.
Praying it will finally be done today of tomorrow. Oh btw, the Blitz SBC i-color is done.
-
OK. Got some answer from Mercury Motorsports. Since My car still at the workshop.
They are having trouble with the emanage ultimate wiring for the GTT, one of the injector won’t fire or something. Has anyone else got this unit installed and can share some lights?
I heard Autobarn sell greddy stuff, does anyone know if they sell and install the unit (emanage ultimate)?
-
hey guys:
my MRR34 is going to be out on that day
hey I seen you a few times on Mains road Sunnybank area. Looks pretty sweet.
Endless Sss Brake Pads
in Suspension, braking and tyres
Posted · Edited by hoo@h
I just ordered Endless SSM from perfectrun. $347 for front and rear pad (EVO VII Brembo) together or it's $190 if you just want either front or rear plus about $70 for postage.
http://www.perfectrun.com.au/