[Bee*r Rev Limiter Wiring Help. R34 Gtt]

Oh alright then. Well if you have anymore info on how the ecu prevents excess fuel from going into the exhaust feel free to share as I'm curious as to how it does this. And possibly the tachometer may be wrong, I'll test it out next time and see !

[Bee*r Rev Limiter Wiring Help. R34 Gtt]

Really? My mate has a vid of it revving at 7500. Also how does ecu control whether it shoots flames or not ?

[Bee*r Rev Limiter Wiring Help. R34 Gtt]

I mean rev past 7k. Don't want to push it too hard aha. Ironic thing to say for a guy wanting to chuck in a br but still

[Bee*r Rev Limiter Wiring Help. R34 Gtt]

Well cheers for the tips and if anything does go bad I'll post It on here and you guys can say "I told you so" ahah

[Bee*r Rev Limiter Wiring Help. R34 Gtt]

Launch control and to make sure I don't over rev

[Bee*r Rev Limiter Wiring Help. R34 Gtt]

Just need to do a sneaky uninstall if something goes bang/clank

[Bee*r Rev Limiter Wiring Help. R34 Gtt]

Yeah I know I've read a lot of bad stuff but also know people who have them on for years and no damage. I have a warranty for my car so if something does go bang it won't f**k me too hard

[Bee*r Rev Limiter Wiring Help. R34 Gtt]

Damn pics didn't send

[Bee*r Rev Limiter Wiring Help. R34 Gtt]

Hi I'm installing a Bee*R in my auto r34 GTT and I need some help finding the correct wires to splice into. I've found pin diagrams but I'm not sure which is which and there are multiple for some. Could anyone confirm where which wire goes?

Any help would be greatly appreciated !

Black Ground 25 or 32?

Yellow crank angle sensor 1° 46

Green crank angle sensor 120° 44 or 45 ?

Red 12v power supply 67 or 72 or 80?

Here's photos of where the wires need to go

Here's pics of the pin diagram for auto r34 gtt's

[$50 Import Monster Store Credit For $45]

As the title says, you get $5 off your next purchase for free pretty much. Text me or email me if keen

0435534122

[email protected]

Cheers

[Aftermarket Parts Galore Ecus, Turbo Kits, Pumps, Seats, Intercoolers And More]

I've sent this guy 3 texts on separate occasions and numerous pm's about buying stuff. Sent him one about buying 3k worth of shit and no reply.

[How To Remove This F****ng Bolt ?]

I ended up getting a 70 cm breaker bar (biggest I could find at super cheap) and it took me pushing from the bottom and a mate pulling from the top to get the bastard loose. Honestly felt like the f**ker was welded on. Cheers for the help guys and the great comments !!

[How To Remove This F****ng Bolt ?]

Breaker bar hits the fender before it even starts to loosen it and I can't start at a lower point as rotors in the way

[How To Remove This F****ng Bolt ?]

I busted my ratchet doing it with the hydraulic jack haha. I finally got the rear bolts off using the bar but now I'm stuck on the front ones. There's not much space to use the bar between the rotors and fenders. Has anyone changed suspension before and if so could you tell me how you removed the front bolts ??

[How To Remove This F****ng Bolt ?]

There's a bit of metal in the way of the nut on the other side so I can't slip my spanner over it. I'll try the power bar and loctite freeze. Not too keen on buying a rattle gun as id blew the bank on coilovers but if that doesn't work I'll have to as the bolts starting to strip. Cheers for the help guys and I'll let you know how it goes.

[Various R34 Parts Turbo Housing Injectors Exhaust Cams And More]

Bugger, was. Hoping for 3". Anyway cheers and good luck with the sale

[How To Remove This F****ng Bolt ?]

I'm putting coilovers on my GTT and the bolt that goes on the bottom of them is wedged tight. I'm stuck on the right rear bolt. I've tried hitting spanner with a hammer, went through a can of WD-40 and even tried jacking up my ratchet to free it (rip ratchet). Does anyone have any tricks to free it? Also I can't heat it up because of rubber bushing. Any help would be GREATLY appreciated.

Pic of the bastard

[Wheel Sizes & Offsets For Skylines]

Model: r34 gtt

Wheel diamiter: 18"

Wheel width: 9.5" all round

Offset: +15 all round

Wheel size:225/40

Hi, I'm looking to buy a set of hks coilovers for my car and I saw these wheels for sale. If I bought these wheels how far could i lower my car before I would need rolling of the guards ? Also I'm not an expert on tires so while I'm posting this will 225's fit on 9.5's without any issues ?

[Various R34 Parts Turbo Housing Injectors Exhaust Cams And More]

Flange dimensions of cat and is it straight bolt on ?

[What Part Is This And Where Can I Find A New One?]

Thank you for all the help, greatly appreciated

[What Part Is This And Where Can I Find A New One?]

Yeah the bit of rubber that goes around the hose. Snapped it while changing rocker cover gaskets. And will do, once again thank you so much for the continuous help !!

[What Part Is This And Where Can I Find A New One?]

Thank you so much ! I was this close to going to bunnings and buying some superglue for it haha

[Urgent Rim Fitment Help Needed]

Thanks for all the help guys!!!!! Much appreciated and I think I better not get these rims aha

[Aftermarket Parts Galore Ecus, Turbo Kits, Pumps, Seats, Intercoolers And More]

Texted about the exhaust. Please text back/ pm me

[What Part Is This And Where Can I Find A New One?]

I broke the rubber hose thing off of my GTT that goes into here. Can anyone tell me what part this is called and where I can find a new one without wrecking because no one will give me this part separately as they don't want to pull apart engine components.

Thanks in advance