020king

Thanks for the help. This piece of kit is a all in one which is good. Better than having gauges everywhere.

Thanks for the help this scan tool will be very helpful

Thanks alot for the help and info

Noobie here. Will rota grid's 18x8.5 et 35 front and 18x9.5 et35/30 fit r33 gtst. Without modifying the arches. And whats the recommended tyre sizes. I was thinking 225/40 front and 245/40 rears? Any help is appreciated thanks

Thanks nice good bit of info to know

Thanks for your input. Any recommendations for aftermarket water temp gauges?

Why do soo many people hate on the hks mushroom intake? I understand in hot temps it ain't gonna be good but here in uk we rarely get hot summers and if at most 2 months of summer. I also hardly drive the car it's a weekend toy have put 1k miles on in 1 year. I get that the mushroom filter can disintegrate but surely if you change it every year it shouldn't? But Yh il look to see if it drops any further /gets worse, then start looking at replacing thermostat

Thanks for the reply. It's winter here the temperature dropped to - 3c couple weeks ago. Now it's been around 5 to 7c. Could that be the reason? Could the air intake be sucking in cold air and cooling the engine? I do have an hks mushroom intake without any sort of box around it.

Thanks for the reply. Yes the fan is running good.

Thanks for the reply. I will get it checked out before I replace the thermostat

Thanks for the reply. It has always been dead in the middle. Just recently started dropping towards the cold side when I drive fast over 40mph. When at idle it will come back up to almost the middle. I will get a proper water temp gauge and see what that reads.

Hi everyone, was hoping someone could help with a problem my r33 gtst has developed. When driving the car above 40mph the water temp needle starts dropping slightly just below the middle level and would stay there untill idle. When the car is idle the needle is near enough to the middle. When it's cold weather the needle will once again stay below the middle level. Could this be the thermostat? How do I check it? Any help is appreciated. Thanks

I'm in the UK so it's perfectly legal without cover but I do plan on making a heat shield around it

Tbh it feels abit more quicker like torque wise. I left the standard snorkel on to act as a little shield and I plan on making a proper heat shield around it.

Thanks everyone for the advice. I couldn't get to 2 of the bolts as those gold bolts can only be removed from the opposite side. I was scared of applying too much pressure on the hose and tearing it so in the end I decided to get 2 big flat head screw drivers and pry away and it came off easy. After that it was all good and its now on the car. The car sounds amazing can hear the turbo spool up loud like a jet. ???

Will I have to remove those 4 bolts anyway to connect that side to the hks air intake?

Do I also remove the 4 gold bolts circled in red?

Do I need to remove the 4 gold bolts circled in red? Everything else is unbolted and iv been trying to remove it via from the hose circled in green if I can free it from there then the whole box and maf will come out. Thanks for the help

Hi, I need help changing my stock air intake to pod. I was in the middle of removing the stock air box. Iv unbolted everything but can't seem to remove the maf from the hose. Iv undone the jubilee clip but it's not budging. Pic has been attached and I will resume once the rain has stopped. Any help is appreciated!

No one knows if aftermarket intakes are same fitment on r34gtt and r33 gtst?

Hi everyone, I'm looking to buy a r33 gtst hks super power pod intake for my car but where I'm buying it from only have r34 gtt hks intake. Will the r34 gtt pod kit fit the r33 gtst? I asked the sellers and they couldn't confirm but said it most likely will fit so before I buy I thought I'd ask here.

Thanks for all the suggestions, I have checked the rear 1/4 where it meets the boot on both sides it looks like someone has already put sealant on it and painted it. I will need to check the rear lights again and I think best way is to climb in boot and have a friend jet wash the boot from outside to see where its coming in from ???

I have circled where the most wet part of it is and think this is where water is getting in from currently?

Hi everyone, I'm a new owner of an r33 gtst 40th anniversary edition. I was recently cleaning the boot and spare wheel well and discovered a leak. I imported the car from japan 5months ago and there are signs of repair to rust and leaks in the spare wheel. I have searched forums and people keep pointing to the boot seals or rear light seals. Iv checked these and they seem good. I have attached pics so any help would be grateful. Thanks