smok74
-
Posts
242 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by smok74
-
-
TURBO SOLD..... That's gotta be the fastest sale ever !
Still have GENUINE GARRETT GT35 1.06 a/r REAR HOUSING - BRAND NEW - $485
-
I just listed a BRAND NEW GT3540R with a 0.63 turbo housing that would be perfect for a RB20.....You'll need to use an external wastegate tho.....
-
I have a brand new Garrett GT3582R turbo for sale, it's got the 0.63 rear housing (perfect for a RB20) and it has never been installed.
Asking price is $1500ono shipped to anywhere in Australia via registered post - Pick up is welcome from Blacktown area.
I can also have the compressor cover polished to a mirror finish for an extra $145.
CGC wants something like $2200 for this turbo, Tweakit is asking around $1750 even the cheapest on Ebay is about $1600... so you decide.
********************************************************************************
**********************************************
I also have a BRAND NEW genuine Garrett 1.06 a/r turbo housing for this turbo for an extra $485 if interested, GCG is asking $593 for this item - I rang and checked.
Message me if interested.
-
hey mate, where in sydney are you located?
if i cant find a set of 34 rims i'll probably end up settling for these!
Go to MU SECRET at Stratfield for your R34 GTR rims.....He's always got them. Be prepared to pay around $1800 - $2000 for them tho....
-
I have for sale a Brand new Whiteline rear sway bar for an R33 GTST.
The swaybar is the adjustable 24mm version.
Price is $160 pickup or $200 delivered.
Located in Western Sydney.
MSG SENT
....24mm ? not 20mm ? Thats chunky ....
-
I just sold a PFC with the genuine Apexi add-on boost kit two weeks ago for $1500 - it was a couple of months old and I replaced it with a Haltech...so spewin hey.
As with the cage, NO ITS NOT CAMS APPROVED due to the diameter of the main hoop, its not thick enough..... and as with the sunroof model, all you have to do to make one of these cages fit a sunroof model Skyline, you take the feet-flange plates off, remove about 2.5 inchs off each side of the main hoop, then reattach the feet. This is because the factory sunroof in the roof lining make it all sit a little lower than the non sunroof model.
-
I have a brand new one of these with removeable door bars for $1100 if anybody's interested.
-
So whats happening guys ? How many have we got now for this group buy for Kyles (6boost) manifolds ???? or have we lost interest ?
-
I hear what you are saying... but really.... autometer?
Nothing wrong with Autometer, I've got six 52mm Cobalt gauges mounted on a 3-DIN carbon panel along with 4 rocket-launcher switches (for the 044 pumps and water sprayer etc) instead of the aircon/stereo/tray setup, also a boost and fuel pressure on the pillar and the tacho on the steering column.... along with the cage, gives the whole 'race car' feel.
Also, the wideband airfuel gauge has a dedicated output wire to hook up to the ECU that you can configure to the correct voltage output range to suit. It made all the difference when tuning the PowerFC Ive got at the moment.
-
Couple of things to consider:
1. The US guy probabley sells more Haltechs in a month that tweakit do in a year hence can buy at a better rate (or may be prepared to sell at a lower margin).
2. There would be GST in the tweakit price (213.18... roughly) - if the haltech got valued at customs at its true market value (unlikely) you would be up for another couple of hundred at least (customs entry and GST, depending on what tariff they use you may be up for even more).
3. Buying locally can be worth it in the long run (even if you pay a little more) just in case you need some help with the product you purchased...
That being said - I know, it seems wrong that Aussie products can be bought cheaper in the US...
Just my 2c
99% of the time when I buy stuff from the US, I request the seller to declear the item as a 'gift' when sending it, that way... NO CUSTOMS TAX, NO GST...... Just before the Aussie dollar crashed a few months back, I brought 9 Autometer COBALT gauges from a seller over there, e.g. I paid $220 AUD for a Wideband airfuel gauge that goes for over $600 here. The lucky thing was, they arrived exactly 3 days before the dollar crashed ! lol
Also, I checked with Haltech here in Western Sydney, they said providing I can supply the details of the distributor (here or overseas), they will provide FULL technical support and warranty as long as its a geunine Haltech unit.
-
Hey guys,
I have found a supplier in the USA that can supply Haltech ecu's CHEAP.
Give you an example, Tweakit here in Australia lists their SPORTS2000 RB25DET Plug n Play kit for $2345 AUD, 'siverturbo' on www.ebay.com (US) listed the identical kit for USD $1620.99, which is AUD $2025.10 converted over to the Aussie dollar. Take a look for yourselves:
http://cgi.ebay.com/ebaymotors/ws/eBayISAP...T&viewitem=
This is a proper Ebay store with all the other popular Haltech ecu's in the range listed as well.
NOW WHAT I WANT TO KNOW IS, HOW THE F*#K CAN A SUPPLIER IN AMERICA SHIP AN AUSSIE MADE UNIT BACK TO US HERE IN OZ $300+ CHEAPER THAN WHAT THEYRE SELLING THEM HERE AT HOME ????? JUDGE FOR YOURSELVES.
-
is this still for sale?
Why dont u ring the bloody number and find out ?
-
Pics please and a reason for selling after 3 hours use?
LOL just like every single PowerFC you see listed on EBay - 'Used for 1 month....'
-
Here are all the goodies to get the hp out of your skyline,I recently brought most of these parts brand new for the build on my Rb25det in my R33 ser2.but now i need the money so selling it all. contact me on 0422 361 904 or on here cheers jack.located on the gold coast.
New Haltech E11 V2,Rb25 patch loom,RB25DET fuel map,air temp sensor,3bar map sensor,lap top dongle,start up guide and software CD.
Paid $2335 sell for $2150 with receipt from haltech.
New CPC Custom Plenum Creations,This plenum is custom made by cpc specially for RB25s,designed in house and computerised flow tested to ensure the best efficiency.has the plate on the rear for an iac valve has not been tapped or drilled so you still have the option not to run it,and all the vac holes are tapped on the bottom along with fittings.Throttle body flange is for standard rb25 throttle body direct fit.
Paid $880 sell for $820
Second hand Garrett GT35R ball bearing turbo,polished .70 compressor housing, .63 exhuast housing.comes with braided oil and water lines with speedflow fittings for the block too.all to suit an Rb25 top mount manifold setup.also comes with an original garrett turbo blanket.this turbo only did 10,000 kms no shaft play practically brandnew, $1200
New magna fuel reg with liquid filled turbosmart guage,steady pressure upto 700hp
paid $340 sell $300
New 6 X siemens 870cc 14mm Top feed injectors with O-rings
paid $540 sell $500 with receipt from injectors online.
New 14mm Billet fuel rail
paid $150 sell $100
Second hand 45mm Turbosmart progate,with V band clamp onto manifold unsure what spring tension.
sell $400
New HKS super fire spark plugs,Iridium and platinum,to suit rb25det M35i
paid $180 sell $150
New K & N pod filter 4"
$60
New vac block $80
Second hand standard R33 series 2 fuel pump
$60
Second hand Drift oil catch can with bracket $40
[
attachment=207015:IMG_0026.JPG]
[at
tachment=207020:IMG_0001.JPG]
[atta
chment=207025:IMG_0012.JPG]
The .63 housing on the GT35 is way too small. .82 is perfect for the 2.5 litre and the 1.06 for the 3 litre.
-
BRAND NEW HALTECH NEVER USED FOR $1800 WITH RB25DET PATCH LOOM,MAP AND ALL THE SENSORS YOU NEED
Because the new Haltech P-sports2000 ecu is out, the E11V2 has dropped in price, there's a store in NZ listing on Ebay.com.au for about $1500 with the plug n play patch loom and 3 bar MAP sensor. I'll offer you $1350 for what you have here. Let me know
-
Hi guys,
Just picked up a brand new Plazaman plenum and Im after the metal-frame-reinforced rubber gasket / seal that goes between the upper and lower runners on the inlet plenum on the R33 RB25DET engine..... phew....that was a mouth full !
I dont wanna really go to NISSAN unless I really had no choice.......if somebody knows where I can go to get it cheaper.....Im sure SOMEBODY would have had to get one at some stage.....
The one that looks like a chain of 6 rings.....I mean, I could re-use the original but being over 10 years old, I dont wanna risk it and go thru the grief of having to rip the bloody thing off again after fitting it just because its bloody leaking.....
So drop us a line if anybody knows
THANKS FELLAS....
-
hell keen for the tripple din carbon plate.
could you please show a picture of this, and you have dodged the $$$ quesion several times, so how much for the trippl din.
and please, pics
SINGLE DIN $55
DOUBLE DIN $75
TRIPLE DIN $90
Prices include shipping via registered post to anywhere in Australia.
I am in the process of laminating a fresh patch right now so pics will be up shortly.
I'll be taking orders once these new ones are ready to be shipped.
-
Yeah not happy. Im pissed, I checked his profile and looked at previous posts but failed to see any bad doings..... I even spoke with his Mum and transferred the money into her account. I asked her to read me the part number off the box and I checked and the number was genuine and was a strange number so I thought they would have definately had to have them box there with them to be able to do that.... Then there was just excuse after excuse saying he had been in hospital and had dramas with the post office bla bla. Now he will not answer his phone.
I have left a bad trader rating and reported him to the mods and have my bank trying to trace and recall the funds. Fingers crossed.
Cheers guys
Anybody can get the part number from the company's (Greddy) website so that part's not hard.....Personally, I think this sale started as genuine with the seller originally having those coilovers, BUT as soon as he received you money, the devil's voice inside his head took control and he must've decided to 'STUFF YOU, now I have your money, I wont bother sending your coilovers because its so easy for me to get away with it...with you being interstate and all'
Personally, I reckon the seller kept your money and sold the coilovers again to somebody else....he double dipped at your expense.
Have you reported this to the cops yet ? Id be chasing it up if it was me.....four digits is a lot of money, thats a weeks wage (or even two for some !) for me.....
-
Oh yeah, I received my GT3582R turbo....brand new ball bearing turbo in Garrett box, I picked it up from the post office COD. What they do is, I hand them the cash, they deduct their fee, make out a money order for the seller to go back to his end, transaction completed - No hassles, no dramas.
FOR AN EXPENSIVE ITEM, THE SELLER SHOULD UNDERSTAND AND HAVE NO OBJECTIONS TO COD AS A METHOD OF PAYMENT. IF THEY DONT LIKE IT, THEN THE CHANCES ARE PRETTY GREAT THAT THE WHOLE THING IS A SCAM.
-
Not a huge fan of the little ones for mine, wanted something that goes all the way across the radiator/headlights in carbon. Mate has the garage defend one on his S15 and it looks amazing.
The one I have is a full one that goes from one end of the rad support to the other. You can decorate it with some decals or whatever.
-
Hmm thats probably why no one makes them for the series II then
Could you still post up a pic of how it sits?
No worries, I'll take a pic of it on Saturday....I gotta run right now.....Gotta go to work so I can pay for this terrible addiction callled 'Skyline' !
-
OKAY GUYS,
RESIN SUPPLY HAS ARRIVED !!!
Im busy-as this week doing 12 hour shifts but I'll start making those DIN-plates this weekend and will post photos up around Sunday/ Monday night....
Cheers guys
-
Could you make an entire carbon deflector for a R33 Series II front like this:
All the ones that are available are for R33 GTR's. Pretty sure if you made these for Series I's and II's they would be very popular...
Its called a Radiator support air diversion plate.
Errrr.... I have a GTR one already on my 1997 series II R33 GTS25T..... If it fits a GTR, it'll fit a GTST. The areas above the headlights are slightly different on a series 2 but once you bolt it on, you cant tell ! Honestly, if you really want one, I guess I can use my existing one as a mould and modify it slightly to fit a series 2, but like I said, the difference is so small it impossible to tell.
-
Rear wipers are GAY...PERIOD
Garrett Gt35 Rear Housing 1.06 A/r
in For Sale (Private Car Parts and Accessories)
Posted
I have a BRAND NEW GARRETT GT3582R 1.06 REAR HOUSING for sale, never installed.
I replaced it with a 0.82a/r housing after realising (before even installing it) that the 1.06 was too big for my application.
Good if you picked up an ex-XR6 GT35 and want to run an external wastegate OR if you're currently running a 0.82 on a RB25 and want to run a RB30 bottom end.
ASKING PRICE : $485
GCG retails this unit for $593 AUD so save yourself a hundred bucks.
FREE SHIPPING WITHIN AUSTRALIA & PICK UP FROM BLACKTOWN AREA IS AVAILABLE