Dylank

Hey mate how did you go with the swap and what route did you take with the loom/ecu

If you have a rb25det series 1 or 2 already, it's not to bad as you have most the parts you need to interchange but buying neo stagea engine for a project is making your job a lot harder

Thanks for the help guys. But yes beware anyone telling you putting awd neo into a r33 is easy, are just lying and trying to get rid of their engine lol

I think using a s2 r33 loom with r32 nistune computer is how I'll go as by what I've read it's less mucking around and more straightforward for someone with no wiring experience. Hooking up the r33 body loom to neo engine loom would be a a job I cannot do.

Here just to clear up that I have 2 pairs of front turbo brakes. I just had them NA ones in the boot of one and thought someone would know straight away. Thanks to the legends that help a brother out and don't play God with the information they know, we're all good at doing different things, helping someone with your knowledge is a act of kindness. Making a joke out of a simple question is pretty disrespectful, this could be my first r33 I've took apart and put back together (it is)

By saying "I think your new "gtst" left the factory as a gts....maybe check the VIN" Doesn't give me any information at all. I already checked the vin turns out they are both turbo manual from factory. Would have been helpful if he said the twin piston front callipers are from a none turbo model.

Are you ever actually helpful 🙄

Thanks bro I was talking smack with my mate and saying it could be the front NA brakes. Cheers for your time mate

I got these brakes with a r33 gtst series one I brought a few years back and presumed they were to suit the vehicle. But then I recently brought another r33 gtst but the rear brakes are different. Hoping I have something special 😅 any help greatly appreciated 🙏 first 2 pics are of the caliper in question the 3rd pic is of rear brakes on new car

Out of curiosity what mods have you got to produce the power out put

Nice write up mate. Collected some good info from all this 😁👌

Tough decision, I have the neo loom and r33 loom both have been messed with but I have a mate that can do the wiring for me his just not familiar with rb engines and ecu's. I'll try and find a bit more info as I can get a power fc for a neo

How does this work plugging it into a r33 computer? Or is engine and body different

Cheers guys I've got a mate doing the awd sim for me so I'll have the bottom bolts to use in bell housing. What did you guys do with the wiring and computer. Should I use the loom in my series 1 r33 gtst or the loom that can with neo stagea engine.