Magik32

do you have the resistor pack aswell?? i might be interested

Can i have a price for the Ap Engineering power fc, for a R32 Gtst Rb20. Thanks Magik32

Hey guys, I currently have an R32 gtst skyline with 160 rwkw, I have a front mount, 3" zorst and dump pipe, pod filter and iridium spark plugs, My car is going in next week for a Wolf 3d ECU, and rx7 injectors. I have found a HI FLOW t3 for sale, here is the add: The T3 / T4 TamKO Turbo are custom matched for specific applications. Airflow ratings to 600 HP. Consists of a T3 turbine section, (standard, Stage II or Stage III trim) and a T4 compressor section (T04 trim). The turbo offers the low inertia and fast boost response of the light weight T3 Turbine wheel and the high airflow characteristics of the T4 compressor. Air flow rating of up to 600HP 3" Inlet Diameter : 2" outlet : Wet Floating Bearings : 1/8 NPT oil inlet T3 Flange : Fits T3 and T3/T4 Manifolds Specs: . 50 a/r compressor .63 a/r turbine Is this turbo to big for an r32??? will it still boost hard and early like my standard t3?? what rwkw figure is possible with out changing any internals in my engine?? Thanks for your helps guys Magik32

Hey Guys, I'm just curious in finding out what use the hand controller is to me?? If I buy a power fc, it will go to TillBrooks for installation and tuning, and I'm sure they have the products to be able to tune it and set it up, So what use would the hand controller be to me, What functions does it display?? Do I need it?? Thanks for your helps guys. Greg

Hey guys, I know this must have been covered a thousand times, but i couldnt find the answers i was looking for, so i thought i would try again. I'm looking at dropping an R33 box in to my R32, but I don't know were to take it to get the conversion, I understand I Need a custom Tail Shaft, a different Speedo Cable, and a modified or custom cross member,. Correct me if I'm wrong on any of the things above, or if I have missed anything, But where in Adelaide would I take my car for this sort of work??? Does a R33 box bolt on to the engine the same, does it have the same shaft pattern??? Any help would be greatly appreciated. Thanks guys Magik32 Greg

Hey guys, I know this must have been covered a thousand times, but i couldnt find the answers i was looking for, so i thought i would try again. I'm looking at dropping an R33 box in to my R32, but I don't know were to take it to get the conversion, I understand I Need a custom Tail Shaft, a different Speedo Cable, and a modified or custom cross member,. Correct me if I'm wrong on any of the things above, or if I have missed anything, But where in Adelaide would I take my car for this sort of work??? Does a R33 box bolt on to the engine the same, does it have the same shaft pattern??? Any help would be greatly appreciated. Thanks guys Magik32 Greg

Does anyone know if this bearing can be replaced??? And is it hard??? Thanks Magik32

Hey guys, I need a little help, my gearbox has been making some whining noise pretty much since I brought the car, my car went in for a service the other day, and the guys told me that my problem was the (input shaft bearing) or something. I always thought it was like my thrust bearing, but my old mechanic changed that and it didn't make any difference. This is all in regards to my Rb20 box from my R32 gts-t. Is this something that can be replaced?? Is it terminal, i.e like really bad?? Rough costs?? Would I be better of putting a whole new box in?? Thanks is advance for all your helps guys. Magik32

Hey Dave, I had a similar problem in my R32 gtst for some time, my dash lights would come on, then go off. I'd hit my dimmer switch or something and they would come back, but eventually they wouldn't come on at all. My blinker lights still lit up, so did my hand brake light, but no dash lights. I took it to an Auto Electrician today and it took then about 2 minuted to figure out my dimmer switch was playing up, they took the dimmer box out and there was power at the end of the wire but the dimmer box was broken some how so it wouldn't return the signal or charge to say it was working to turn the dash lights on, To get round this they just looped a wire from one side of the plug to the other, means dash lights cant be adjusted now until I somehow get a new dimmer box. we pushed the dimmer box back in its hole just to make it look normal still. Sorry about the long post, but the information might be useful to you. Magik32

Hey there, I'm not sure what your willing to spend to fix your front bar, but I had a similar problem, my bar was buggered. I took my Line to Impressive Paint and Panel in golden grove, and Darren and the guys there re fibreglassed the whole bar and strengthened it, then gave it a full respray, and it cost me $500. My bar alone is worth $700 just to buy, so it was a good investment to get it fixed instead of a whole new bar + painting and fitting at a price of $1600 where I got it done last time. Hope that helps. Greg

Hey I know this might sound stupid but, I have an R32 gtst, and i work arvos. The front window is getting extremely fogged up, to the point where i cant see out of it. Do i need to have the aircon on the front window, or the heater to unfog it?? Thanks for your help guys Greg

Hey Paul, Im very interested in one for my R32 GTS-T, But before i hand over any money can You answer 3 simple questions for me: 1) Are these brand new?? 2) Is there an A.P Engineering power fc Key Ring in the box??? as i heard thats a bonus of this version. 3) can you quote the modle number of the A.P Engineering power fc for me. Thats and excellent price, best i have seen by a few hundred. Thanks Greg

Hey Mason, Are these items still or sale?? Any Chance for a price drop to about $2000 in total?? that way i can pay for shipping to adelaide. Do you know what shipping would cost for the gearbox and clutch?? Thanks Bro Magik32

Hey there, I was just wondering if these wheels and tyres are still up for grabs??? If so would you be willing to arrange delivery to adelaide?? re you able to get me some prices?? Thanks Magik32

Are they the clear set, or the orange set for the R32 Gtst??? Are they in good condition??? Is the clip at the top of them in good condition?? Are you able to take a picture of them?? The Pair on my car at the moment i payed $137 for both, but my girlfriend hit the gutter in my car and smashed my front bar up through my blinker. Tell me what you want for them??? Thanks heaps Greg

Hey peoples, As the topic states, i need a clear indicator for the drivers side of my R32 Skyline. Im pretty sure the clear are from the GTR, where as standard R32's have the orange indicator, Im talking about the set up thats next to the frount headlights, Im hoping for just the right hand side one, if someone has a pair i will concider that, Item needs to be undamaged. Thanks guys. Greg

Hey peoples, As the topic states, i need a clear indicator for the drivers side of my R32 Skyline. Im pretty sure the clear are from the GTR, where as standard R32's have the orange indicator, Im talking about the set up thats next to the frount headlights, Im hoping for just the right hand side one, if someone has a pair i will concider that, Item needs to be undamaged. Thanks guys. Greg

Where can i get a new one with waranty for cheap??? The best quote ive had is $660, but thats just straight out of a front cut, with no warranty ( Any sugestions?? Thnks

Hey peoples, As the topic states I'm in need of a good Manual Gear Box Specialist, I'm having a lot of problems with my Gearbox. I have an R32 with an Rb20 in it and standard 5 speed. I probably need a brand new box or a full rebuild. Can anyone suggest anywhere that can help in Adelaide. Thanks peoples Greg

Ok firstly how much are we talking here??? Secondly would it bolt up to my RB20?? and thirdly what skyline did this box come off of?? Thanks

Hey people's Im after a Greabox for my R32 Rb20 Det, Im after prices for a replacment box being a 5 speed manual rb20 box, or a rb25 det 5 speed box, Box needs to be in good condition and not buggered. thanks guys Magik32

Hey people's Im after a Greabox for my R32 Rb20 Det, Im after prices for a replacment box being a 5 speed manual rb20 box, or a rb25 det 5 speed box, Box needs to be in good condition and not buggered. thanks guys Magik32

Thanks for your help with the all Japanese Championship guys, Im now at 18.8% woohooooo but its getting harder, im now stuck trying to win the SuperCar Festival. (

Hey fellas, i have a couple of questions, im 13% in to GT4 and i cant figure out whar car i need to use to cmplete a few races, 1) what car should i be using to complete thr "All japan GT Championship"??? What sugestions do you guys have??? 2) what car should i be using to complete the "All american Championship"??? and the Stars and stripes???? answers to all those questions would be good, but answers to any would help right now, i try go in to the "all Japan GT Championship with my Option Stream Z '04 which has 963 HP, and i can keep up with the cars there running, even tho mines as worked and lightend as much as i can, i tryied using my Fairlady Z Concept car which has total power of 947 and couldnt stay close enough either, hope someone can help. Thanks Guys

Hey timmy, how the hell did you manage to complete the nurburgring licence, i sat there playing for a couple of hours getting to like 8 minutes then hads were to slippery or id just over take the pace car and then fail. ( i was getting so frustrated my girlfriend threatend to turn my Ps2 of coz i was cussen so much. Where in adelaide are ya lol, lett me coppy your licencessssss :P I have 6.4 percent completion, If anyone wants easy money, go to the japanese events, do the first event,s there worth $7500 a race plus $35,000 if you win the compertition, and they give you some concept car and its worth like $318,000 and you can do it over and over again and keep selling it. Woohoooo to GT4