DVS-8OR

im planning on buying Used coilovers and would like some info on wot to look out for when buying used coilovers. thanks

I had water leak through my tail lights, so i removed them and took off the old sealant. Could anyone tell/recomend me wot sort of sealant i sould use?

so the self learning function doesn't work with injector loads?

Which signal wire would be better the rev or the injectors? What the benefits of the injector signal apart from seeing what % the injectors at.

Hey how many ppl here have modified their ps2? Where did you get it modified, how much did it cost and what sort of chip was used?

ok thanks for the info

how much does the adapter plate cost?

would there be any problems if u get hks2540 from a sr20, then get an adapter so it bolts onto t3 flange?

When you transfer money to his account, is it in the form of AUD or do you have to convert it here then pay it in YEN?

i had this prob with my hoses too, so i replaced mine. As the hoses ages the weaker they get and they begin to split or break.

whats the news on the cooler? how much longer b4 they're ready?

I just got myself a 2nd hand unit and was wondering if i reset the unit to defualt setting, would i have to let the car idle so the unit can learn the rpm? I know with new units you have to do this but im not sure about 2nd hand ones?

If the powerfc comes in two version one old n one new. How can u tell which version it is?

put me down for one

i haven't machined them. they're abt 30mm thick.

Would anyone be interested in a pair of standard disc rotors?

can anyone tell me how good these coliovers are?

What should be the level of power steering fluid in R33? i can't tell how much to fill cause there no min or max on the side and the dip stick only say hot on one side and cold on the other. I think mines low cause i get this buzzing sound when i turn the wheel

My friend just told me about this online drag racing simulator www.nitto1320.com how many ppl here tried it?

im interested in the side skirts. email me if its still available [email protected]

yeah i have the same problem it mainly happens when the temp is set to the warmer degrees. But when i change it to the coldest temp the noise is gone.

i know this is a silly question but what is meant by guards rolled and how is this done?

hehe the skyline exhaust was louder than # of car together reving at the same time

will the seat fit into a r33?

with the mags i got the back fitted fine but the front need a 10mm spacers to clear the brakes. This is without lowering the car too so now it sits pretty high