Ghodde

k6.2. The RS6 is just a 6. the 6.2 is the component set: http://www.kicker.com/ShowPage.cfm?filenam...l&menu=MIDTWEET (At the bottom of the screen) Or, up close: http://www.kicker.com/Closeup.cfm?menu=mid...oducts/K6_2.jpg

I can now get new Kicker amps quite cheaply. eg Kicker KX850.4 Amp, 4 x 215RMS or 2 x 425 RMS for NZ$1,000 (approx AUD$900), ( + COD to Aussie) The 650.4 retails in Aussie for AUD$900, and pulls 170 x 4 or 325 x 2. You can not get the 850.4 in Aussie. So it is only COD more expensive to get one that is 200RMS better!!!

Pioneer DEH-940MP Premier Head Unit 3 Pairs of Kicker K6.2 Components 1 Kicker KX850.4 Amp 1 Kicker KX350.4 Amp 1 Kicker KX150.2 Amp Kicker L7 Solobaric 10" Sub

Std fronts are 6x4's. Make some pods and put in 6" components. I'd leave the rear speakers out of the parcel shelf to allow the subs to port into the car. Better sound, and reduction in rattling. You can place rear speakers (if you have a coupe), in behind the side panels in the rear, ie the vertical piece of fabric above where your arm rests if you are in the back. I made some pods for the void space behind the panel, removed the carpet, cut out a 6" hole to let the sound out, put a 6" speaker grill in there from Jaycar, and placed the carpet over the top. You would never know they were there, but you can hear them loud and clear.

I like my Kicker components, running off a Kicker KX850.4 amp. I'd recommend them to anyone.

From a 1997 GTR: Complete engine (ie with turbos, intake manif etc) Gearbox Driveshaft Loom ECU NZ $6,000 - $6,500 Buyer to pay C.O.D.

Hazard switch: Yes (somewhere). Vents: No, sorry. Callipers $250 + freight. (has 70+% pads).

No, sorry dude.

My thought exactly skyliner33wa. Kitting it is all good, but leave the badges off. Anyone can have the kit, but only people with a true R deserve the badge.

go to www.toyo.co.nz click on "Car Tyres" then "T1-S" then "-> Get The Specs" (under the picture of the tyre on the left) This gives you everything you'll ever need to know.

Opened mine up. It's not hard. Not easy either, but not a major. Just time consuming if you want to prevent braking anything...

No disks. Just callipers. Here's a pic:

Hey all. Sorry about the delay in response. I've been in hospital. Whilst there a guy bought a whole lot of stuff so what's left I have kept listed at the top. The rest I have removed.

calvintys: I've sent you 3 emails??? I have the heater control panel, and I sent you a pic. I do not have the plastic bit you want. I'll send you another email now. Email sent eriktufa: Sorry, I do not want to seperate them.

Dammit... I can not find the damn letters!!! HOWEVER: go to www.skylinesdownunder.co.nz and go to: Skylines Downunder Discussion Forums > Classifieds > For Sale: Private > Wrecking R34 GTt most parts available I am sure Brenhan could help you. Sorry about this.

As the title says: RB20DET Engine (134,000km) (From an R32) ECU Loom Gearbox Clutch Pedal Clutch Reservior Driveshalf yolk for gearbox Engine has new Iridium Plugs (5,000km old), reconditioned coils (all 6). Clutch is perfect. NZ$2,200 ono.

I have the GT badges for the front guards, the "S" for the front grill, and the letters to spell "SKYLINE" for the rear.

Including freight to Australia, NZ$350-400 ~= AUD$310-350

They will IF your R33 is RWD. If you change the hubs, it is best if you change the lower arms (which I have) as the ball joint bolt MAY be a different length. But the arm and hub will bolt straight in. You may need to get a wheel allignment after though.

I now have the rear seats too: Seats $550 (Front) $400 (Rear) or $750 for the lot

And another

Here is a shot (taken before I cleaned it).

Other than the colour, is there any difference between an RB20DET with a gold rocker cover, and one with a silver one? Thanks in advance.

I have a blue one from an R34 25GTT if you're interested.

From an R33 or R34 gearbox, I need the speedo transducer. It's the thing at the driveshaft end, drivers side, of the gear box. It has 2 green wires coming out of it, and is held in by one 10 or 12mm head sized bolt.