sil21jun

Hooks up to battery terminals. Suit all cars that runs on battery! 2min job!

This is the RX7 series 5 injectors

I doubt they are the same as RB25. I have seen those rx7 series 5 injectors. High impedance and top feed. If SR20 uses the same plugs as RB25 then they are not the same. The plug shape is slightly the same as the SARD 550cc injectors (oval). The 2 side grooves for the plug to slide in is slightly off tho.

I got 10psi for my standard boost on my silvia and my housemate GTR has 0.7 bar as well. But I have heard too many people saying that their stock boost is 7psi... doesn't matter I guess, ultimately, everyone wish to bring it over 15psi. Cheers!

I did mine with pins I bought from Mitre10. I am not sure if the plugs are the same as Commondore ones. Use another set of wires approximately 3" long. Connect it to the new female pins. Test the resistance between the new terminals. If ok, squeeze silicon inside the injector socket and wait for it to dry completely. Connect the 3" long wire to the standard injector loom. You can choose to remove the old injectors plug or hide it somewhere. Preferrably water prove it in a tiny plastic bag. It is important to test the connectivity or it will be too messy to clear those silicon out of the way! Good luck

But you are talking about spending 1k(550 for ECU, 400 for software and wiring loom) on a piggy back and 1.3k(with commander) with a standalone.

ball bearing turbo does have a very minimal play due to the ball bearings! It's different from bushing style.

Improve fuel economy Maintain high voltage Fatter sparks Increase horsepower I have tried it and it improves mid range response. I tried it on Holden Barina, Alfa Romeo, Toyota Soarer and Silvia. Revvs up faster and heaps of difference on turbo cars. It works like the HKS twin sparks but alot cheaper.

Improve fuel economy Maintain high voltage Fatter sparks Increase horsepower Their website can be found at http://www.sun-auto.co.jp/pro_inazma01.htm Use this translator http://world.altavista.com/ Insert the website to be translated and choose Japanese to English. Selling for AU$450. Test try available to serious buyer only! Email only please [email protected]

1.5 mm copper head gasket + block o ring

super fish!!!! haha

1.0 is cool! just don't detonate that bugger!

minimum I suggest would be 16 x 16.

how many mapping points?

Blitz intercooler are good and cheaper than most.

plugs are oval. Can't buy them anywhere and cost $30 each. Don't waste time and money trying to get the correct size. Use 2 female pin. Clip it to the wiring loom and shaft it in. Use high temp silicon to prevent water entering. Too easy

download the setup manual from www.apexi.com

I think you can't just burn the copy. It's coded.. need to get the loom together with the software.. good luck!

try www.vivagarage.com.au.. they have heaps of used turbo and they warranty for a certain period

isn't stock at 0.7 bar not 7 psi?

lucky u

GTRS!

RB25DETT in www.nissansilvia.com

I tot it has 6 wires?

cost too much! prefer powerfc