SexyPete

BUMP

Item: 6 x 440cc S15 Injectors Age: As old as an S15 Condition: Great Price: $350 delivered anywhere in Aus To Fit: Direct replacement for the R33 gtst and capable of 250rwkw + a bit more with a FPR Location: South Sydney (Sutherland Shire) Contact: PM if interested Comments: Selling as they are not large enough for my new master plan, picture only of 1 but I have 6 identical Item: GTR fuel pump on bracket bolt in with strainer and plug Age: As old as a GTR not sure which model possibly R33 Condition: Good Price: $80 delivered anywhere in Aus To Fit: Direct replacement for the R33 gtst and capable of 250rwkw perfect match with S15 injectors Location: South Sydney (Sutherland Shire) Contact: PM if interested Comments: Selling due to not enough flow for my new master plan This is a perfect combination for a high flow turbo setup. Will sell both together for $420 delivered. These are both direct bolt in replacements no mucking around needed. Pick up welcome also Sutherland shire.

Looking at getting a new fuel pump for my r33 gtst, was leaning towards a bosch 040 fuel pump but have been reading around and everywhere states a different flow rate and HP rating etc. According to bosch ( http://www.bosch.com.au/content/language1/...s/fuelpumps.pdf ) the flow rate is 102 l/h at 6.5 bar where as the 044 is 200 l/h at 5 bar. My question is will the 040 pump get me to 250 - 300rwkw as that is what i am aiming for. I am looking at the 040 as it can sit in tank in the standard cradle with minor mods. Thanks Peter

cool, but how bolt on are they, what is needed to be done to get either of these turbos running on a rb25

Yes but i want to know exactly how bolt on this turbo is i.e. what needs to be changed or made up to fit this turbo on an rb25. I have been looking around and was thinking about a GT2871r as well little bit smaller for faster spool as i dont want boost on really late so how much can you get a GT2871r.

I am tossing up between the gt3071r and a GCG highflow. My question is as i can not find it elsewhere what is needed to bolt the gt3071r to an rb25, is it just modified oil and water lines or the whole hog meaning custom dump pipe and intake side as well.

I am interested in one of these, what is the deal with warranty will it be covered here in Aus or need to be sent back to the states.

Does anyone have or knows where to download an english instruction manual for a set of tein superstreet coilovers to suit an r33 gtst (if that matters) or if no manuals availiable can anyone tell me how to set up my coil over suspension. Thanks in advance Pete

I also have a knock sound but mine sounds like it is coming from the rear of the car. It happens over sharp bumps but is also very bad when turning Left over bumpy road but not when i turn right which is funny. It also keeps clunking over bumps not just one clunk. I also got a $14 28 point suspension safety check done and pedders could not find anything either. it is Like a rattle hopefully i can find it and if any one has any ideas let me know because it is driving me INSANE!!!!! Peter

as above, where are the grease point located on an r33 does anyone know. Thanks Peter

so super streets are not as stiff of a ride as people are saying because they have the hr set of teins.

Thanks that is what i wanted to know, also is it worth while getting the camber tops in the kit or not it is only and extra $150 and i would rather just do it if it is worth it rather than muck around again later, how will the camber tops affect the ride?

I am after a set of tein super street, the problem i have atm is wether to get the super street with or without the tops and also wether to fork out to get the australian spec tein super street? Is there a major difference between the jap spec and aussie spec teins? Any help would be great. Pete

I am after a drivers side weathershield as mine snapped while driving along the highway (yes by itself). If anyone has the drivers side one or a set i am interested or knows where to pick some up i would greatly appreciate the info. must be good condition Pm or post here Many thanks Peter

sold

thanks Birnie, i read you did the same mod and it works a treat. Here is also a picture of all 6 injectors for those interested. price negotiable too.

The injectors are 6 of the ones in the photo, i just took a photo of 2 though. They are definatly out of a manual s15 turbo. Not sure wether adm or jdm but from other posts on this thread they both are a direct fit into an r33.

yeah, it is probably not impossible to get 300rwkw if you engine is running efficient and tuned well with supporting mods. Oh and probably a slightly happy dyno.

Forgot to mention located in Sydney and pick up is welcome

Up for sale is a set of 6 s15 injectors. Perfect upgrade for an r33 direct replacement, no mucking around. Good for at least 250 rwkw maybe more dependng on set up. asking $400 ono plus delivery Pick up also welcome - southern Sydney

how much for front reo bar posted to sydney 2225

hey i got a 4 channel amp i am no longer using $100 posted. Does have a small scratch on the corner nothing major.

give me 3 weeks and i will be in definatly.

yeah very keen, hopefully 10 people are keen get it even cheaper.

did you have any trouble putting the hand brake boot on boki, was it a very tight fit