im late

Nah he wasn't a rep becuase I asked to speak to tech support. So I am sure they are following tech manual guidelines. Yeah heaps of people have pushed over 500RWHP (with the right setup) so of course these are going to be a cheap performance alternative to the HKS, GReddys, etc...... I'll be hanging onto the Trust pipes as they are so rare and I don't want to spend money again to get them later..

Wheels are paid for and now sold.

They were tuned for 24PSI. But sometimes it would peak to 27PSI! I called the Garrett Disty before I tuned to ask what is the highest boost to run through. They told me 12PSI!! So I thought, how was I suppose to extract the sort of power I was running at 12PSI? So I gave the go ahead to tune to the max efficiency range the turbos were able to produce, which was 24PSI (on 98 fuel). I honestly bought them brand new and really only did around 5000kms at 24PSI. That was enough to cause shaft play. Which is why of course I ended up selling them off for next to nothing. What is the point of a turbo that can't handle that much boost for an extended period? Not sure if I missing something here.

These guys have one new in stock: http://justjap.com/store/product.php?produ...at=0&page=1 Hope it helps.

Wheels sold pending payment

Garretts just picked up

Hi All, Due to change of plans, only the following parts are for sale. Updated Prices below: Garrett GT2860R-5's, Little shaft play. - $Offers RB26 Block. - Free to good home R33 GTR Crank. - $300 Firm Feild ETS. - $300 Firm GReddy BOV - $300 Firm Wheels+Tyres. - $2100 Firm Cooler - $600 Firm

Cam Gears Sold OSG Clutch is no good to sell (opened up and found clutch packs with not much left in them). Rods and pistons sold pending payment Just checked today that turbo shafts have slight play in them so they are no good to re-use. I don't want to sell worn out stuff to anyone. They will need a rebuild so throw any offer for them.

Holding onto ECU, Exhaust and Boost Controller Using them with smaller turbos on a low kms stock motor for a 300RWKW tune..

Cam gear sold pending payment. HKS hard piping kit sold to a fellow GTR lover.

Wow that was quick! Defi stuff and splitfires sold

Hey All, This is the complete list of parts that are all now for sale. - All prices are firm. - First with the cash/cleared funds get the parts - No holds. - Any freight/packaging costs are paid for by the buyer. - I don't have any other parts right now for sale so please don't ask. - No "swaps + cash" with your stock items. - If you don't like the price, don't buy. - Better price for bundled items. - All items located in Perth. 1. Pair of Garrett GT2860R-5 (Part #:707160-5) turbos, I bought new, Rear housings have been ceramic coated, Only around 5000kms use. - $1900 Firm. http://i227.photobucket.com/albums/dd180/i...ts/IMG_0243.jpg http://i227.photobucket.com/albums/dd180/i...ts/IMG_0245.jpg 2. Trust/Greddy RB26 Adjustable Cam Gears, New in box never used.- $350 firm. http://i227.photobucket.com/albums/dd180/i...ts/IMG_0246.jpg 3. Trust/Greddy Extention Front Pipe Kit, Ceraminc coated, Made from stainless SUS steel, 3.5" exit to cat, To suit R32 Chassis. - $700 Firm. http://i227.photobucket.com/albums/dd180/i...ts/IMG_0247.jpg 4. Set of six RB26 Argo forged billet conrods with bearing caps and ARP cap studs, In good working order, Just had them inspected by an engine shop (recepit to prove). - $400 Firm. http://i227.photobucket.com/albums/dd180/i...ts/IMG_0248.jpg 5. RB26 Arias 87mm forged pistons, With wrist pins, pin locks, Needs new rings, Two are .0015mm bigger than the other four so block will need to be bored to suit. - $300 Firm. http://i227.photobucket.com/albums/dd180/i...ts/IMG_0249.jpg http://i227.photobucket.com/albums/dd180/i...ts/IMG_0250.jpg 6. RB26 05U Block, Cracked (In bore 5), Can be re-sleeved to be reused - $100 Firm. 7. R33 GTR Crank, was just taken to machine shop to get inspected (receipt to prove), Fine to be used again. - $400 Firm. http://i227.photobucket.com/albums/dd180/i...ts/IMG_0251.jpg http://i227.photobucket.com/albums/dd180/i...ts/IMG_0252.jpg http://i227.photobucket.com/albums/dd180/i...ts/IMG_0253.jpg 7. Splitfire (Part #:SF-DIS-001) RB26 Coilpacks, Perfect working order. - $400 Firm. http://i227.photobucket.com/albums/dd180/i...ts/IMG_0254.jpg 8. Feild ETS-C with cable (have basic wiring diagram in Jap/Eng). - $300 Firm. http://i227.photobucket.com/albums/dd180/i...ts/IMG_0255.jpg 9. OS Giken push/pull convertor, Good working order. - $200 Firm. http://i227.photobucket.com/albums/dd180/i...ts/IMG_0256.jpg 10. OS Giken R3C triple plate clutch with lightend flywheel, plenty of clutch left, can arrange view at Xspeed. - $1200 Firm. 11. GReddy Type-R BOV (Stiff Spring Type), Bought new from GCG a few months ago. - $350 Firm. http://i227.photobucket.com/albums/dd180/i...ts/IMG_0257.jpg 12. Rays Gramlights T57RC 18" x 9.5" + 12mm Offset (GTR Offset) lightweight wheels with 275/35R18 Falken RT615 semi slick tyres and Rays hubcentric rungs + work wheel nuts, wheels in pristine condition and bought new, tyres are with around 50% tread left but worn evenly. - $2200 Firm. http://i227.photobucket.com/albums/dd180/i...te/IMG_0160.jpg http://i227.photobucket.com/albums/dd180/i...te/IMG_0162.jpg 13. HKS racing suction kit (airflowless meter type) with K&N filters, ceramichrome coated, with HKS silicone joiners. - $700 Firm. http://i227.photobucket.com/albums/dd180/i...ts/IMG_0262.jpg 14. Endless 6 pot front calipers, racing 4 pot rear calipers, 355mm front rotors/hats (0.5mm of wear), 330mm rear rotors/hats (0.5mm of wear), CC-X Pads, Braided lines, brackets, complete bolt on kit for your GTR, Still on car right now. - $5000 Firm http://i227.photobucket.com/albums/dd180/i...ts/IMG_0260.jpg http://i227.photobucket.com/albums/dd180/i...ts/IMG_0259.jpg 15. Apexi Power FC D-Jetro, Complete with hand controller, map sensors and harness, Perfect working order. - $900 Firm. http://i227.photobucket.com/albums/dd180/i...ts/IMG_0266.jpg 16. Blitz V-Spec 615mm x 300mm x 102mm Intercooler, 3" ends, Good working order. - $700 Firm. http://i227.photobucket.com/albums/dd180/i...ts/IMG_0263.jpg http://i227.photobucket.com/albums/dd180/i...ts/IMG_0264.jpg 17. GReddy RB26 lightweight pully kit (Not overdrive version), good working order. - $300 Firm. 18. Blitz SBC iD Sequential Boost Controller, Perfect working order, complete kit with manual. - $500 Firm. http://i227.photobucket.com/albums/dd180/i...ts/IMG_0266.jpg 19. HKS Intercooler hardpipe kit, 3", from end of Y pipe to plenum, with bolt clamps. - $200 Firm. http://i227.photobucket.com/albums/dd180/i...ts/IMG_0261.jpg 20. Defi Control Unit II, BF White Oil Pressure, BF White Boost, BF White 9K rpm Tacho, GReddy A-Pillar holder, All sensors, + cables, Complete Kit. - $800 Firm. http://i227.photobucket.com/albums/dd180/i...ts/IMG_0265.jpg PM, SMS or Call Adam on 0424 982 764. P.S If you want the quickest reply please call as I am not often on the computer to check PM's.

Mods please close as I am creating a new updated list and unfotunately I can't edit the first post.

Thanks for the comments guys. Sorry for the late reply but the motor has since been destroyed (not by my driving habit) and the R is just sitting at home collecting dust.

Manifolds sold and sent. Stuff still for sale: 1. Argo Conrods (Retails for $1166 from Argo) - $600 neg http://i227.photobucket.com/albums/dd180/i...ts/IMG_0231.jpg 2. Arias Pistons (With wrist pins and pin locks, will need new piston rings - Retials for $1150 from Rocket Inductries) - $600 neg (And no they are not damaged and ready to be reused)...... http://i227.photobucket.com/albums/dd180/i...ts/IMG_0232.jpg http://i227.photobucket.com/albums/dd180/i...ts/IMG_0233.jpg 3. Cracked (In bore 5) RB26 Block (Can be re-sleeved) - $Make an offer 4. Brand new never used GReddy/Trust Cam Gears (In/Ex) - $400 neg 5. Feild ETS-C with cable (have basic wiring diagram in Jap/Eng) - $400 neg

Manifolds sold and sent. Stuff still for sale: 1. Argo Conrods (Retails for $1166 from Argo) - $600 neg 2. Arias Pistons (With wrist pins and pin locks, will need new piston rings - Retials for $1150 from Rocket Inductries) - $600 neg (And no they are not damaged and ready to be reused)...... 3. Cracked (In bore 5) RB26 Block (Can be re-sleeved) - $Make an offer 4. Brand new never used GReddy/Trust Cam Gears (In/Ex) - $400 neg 5. Feild ETS-C with cable (have basic wiring diagram in Jap/Eng) - $400 neg

Sard items sold and picked up.

The six boobs are sold pending payment

Sard items sold pending payment.

OK, I still have the following for sale. Make an offer as I am in a generous mood!! 1. Sard 800cc Injectors with Sard Twin Entry Fuel Rail (Can seperate, injectors won't fit stock fuel rail so best to buy as a bundle). - $800 neg 2. Argo Conrods (Retails for $1166 from Argo) - $600 neg 3. Arias Pistons (With wrist pins and pin locks, will need new piston rings - Retails for $1150 from Rocket Inductries) - $600 neg (And no they are not damaged and ready to be reused)...... 4. Cracked RB26 Block (Can be re-sleeved) - $Make an offer 5. Brand new never used GReddy/Trust Cam Gears (In/Ex) - $400 neg 6. Feild ETS-C with cable (have basic wiring diagram in Jap/Eng) - $400 neg 7. 6 Boost Manifold with Custom Rear Turbo Outlet Pipe - $700neg

Head sold.. ARC airbox sold.. Cam cover set sold..

Pics: With the 6 Boost, you also get the custom rear turbo outlet pipe if you don't neg.

Balancer SOLD Cam gears SOLD

Bought brand new from Kyle @ 6 Boost last year. I then got them ceramic coated at CIC in Kelmscott. They are in as new condition. None of the coating has started to come off. I will include that custom made rear turbo outlet pipe in the sale (Save you a few hundred there).

Yes it does. Complete head minus throttle boddies and plenum.