sherman89

Old topic but i have used hero's quite a few times on the back of my car. Similar grip to 595ss. I ran them at 28psi hot and at that they lasted relitively well! Basically on par with all the sub 100 $ tyres imo!

Nah doesnt scrub on the inner at all! Scrubs a tiny bit on outside. Rears used to scrub lightly, but couldnt run above a 215. got new rears ina 9.5 with 235s, scrub hardout atm but i havnt rolled them yet!

Yeah i dont see why you wouldnt rev it to 7ish. As you would know, its all in the tune!!

Ok, thanks for that!

HI, im getting over the occasionaly split hose on the inlet side of my engine! Got the engine out atm to change a few things and i figure i should get rid of all the stuff im not using/isnt needed! I currently have a stock inlet mani but will be changing to a greddy inlet before i put the engine back in. So my main question is which lines do i need to keep for the water system to work (asin to keep a circuit)? If any? Obviously ill need somewhere to get water for water feed - turbo. Im not running a heater, the line runing up to the throttle body, do i need this? Im not using a stock computer (if that matters) Also the hoses running to/from where my oil filter would normally go, do i need this??? So yeah basicaly want to tidy/simplify as much as i can! Thanks

Hey, is everyone just using the standard 25 throttle body? or is it off something else? Thanks

Finally got rear 1/4 damage fixed and resprayed the car

Hello! Just wondering what the differance is between coilovers made for a r32 gtr and ones for gtst. I dont have a gtst coilover here so i cant compare but whats the differance? Is it just the bottom mount on the rear is a differant type? Or the front aswell? Thanks If there is a slight differance can it be easily modified??

rb25 s1 3inch turbo back fmic safc profec b bosch intank pump 257hp @ 12psi. 244hp @ 9psi

Yeah ill be racing in (i think its called) sport compact or something! First time at the drags in a couple of years!! Getting excited now!

Hey, chasing a rb20/rb25 det crank/cam angle sensor in working condition!! In brisbane!! Thanks

Nah did not touch the cas.

Just wondering if rb20's and rb25s share the same crank/cam angle sensor?? Also side question When my car was on the dyno it was happily running at 9psi with the timing sitting as it should! But as soon as we ran more than 9psi, the timing would go wacked and jump around causing it to detonate. We assumed this was cause by a faulty CAS but am not 100% Has anyone else had a drama like this before? If so what fixed it ? (series 1 rb25 in r32) Thank you

Hey! Bought this kit painted it then decided i want to go back to kitless!!! Side skirts and rear bar are pretty much in perfect condition painted silver! Fit well! Front bar is orange, and it needs some love! With abit of fibreglass work and abit of bog it will be mint!! Chasing $400 for the lot 0423 198 820 southside brisbane!

Highmount rb 20/25 exhaust manifold with dodgee as f**k flange setup. now t3 flange! has a dint in it but it didnt seem 2 effect anything when it was on the car, price reflects this! would suit a dummy manifol to check heights etc etc $50 Tanabe cannon! Huggge cannon, 3inch inlet 5 inch outlet, mint condition $80 rb20 cam covers $20 Standard r32 steering wheel, pretty mint condition $30 Standard rb25 dump pipe $15 Standard r32 radiator no leaks. good condition $30 rb20 CAS $20 ISC hicas lock bar Brand new with bolts etc $80 Standard r32 rear upper control arms $20 rb25 series 2 turbo, minimal shaft play $250 Greddy intelligant informeter! This this is sooo pimp!! it was in my car for approx 3 weeks and i LOVED it! Plugs into your diagnostics port, and can display everything the managment can sense! Its awsome. Its in as new condition with box, like brand new! $400 Im located in Kuraby on the southside, 0423 198 820 call or txt. Thanks

So just loop each termilan to itself? or just leave it

I need to know if you can use rb20 auto computers on a manual. Im pretty sure you can but not 100% so just after a definate answer. Thanks

I bought an engine recently from nizzpro! Got an rb20 (no boltons just block/head) With a new timing belt and water pump for 850! Was 100 more for them to do the timing belt and water pump so i figured at that price why do it myself? Has a 3 month warrenty too

Camerons bodyworks is in like rocklee (i think thats what they call that area)

Power fc with hand controller to suit rb's. Its for an rb25 but is currently used/tuned for a rb20 with a 25 turbo on 15psi. Its in MINT condition! Located on the southside 0423 198 820. $1200 ono

Steeries as above!!! on the back, what ever the tyre pile gives me

Pretty hard to go past camerons body works!!!

rb20 with 88000kms on it! Series 2 rb25 turbo, split dump and 3inch front pipe. Can include cooler pipes for abit extra! $850 Southside of bris, 0423 198 820

4x 18x8.5inch zenetti kaotics, some gutter rash but not very noticable. Shadow chrome with a polished lip 2 tyres are no good 2 bridgestones with about 70% tread! 0423 198 820 $750 Open for swaps, must be 17inch! Located on the southside