J-train

I have a RB25det Neo in my R32 and I blew a turbo seal. Instead of getting the turbo rebuilt I have bought a top mount manifold, wastegate and a new turbo. The old turbo has a coolant line running through it obviously to cool the turbo but my new turbo does not need one. Now do I............... 1. block off the old lines back at the block to stop this or 2. do I need to connect these two hoses together using another hose so that it still has flow through this line???? Will it make a difference detrimentally if I just block it off? Thanks guys

It is hell easy as long as you have the pin out diagram for each ECU and just follow the Tutorial.

Depending on if you get a front cut or a package deal I think it cost $4800 all up including parts. If you can remove the Rb20 and get the Rb25 in by youreslf then you are a long way ahead. There are a fee Tutorials on what you have to do in the Forums, just get your new motor and go from there.

I know what you are getting at and before i removed my setup it was filter topside on the strut tower. I would wait an hour or two for the oil to cool down and drop my oil at the sump, this would then syphon any oil still in the filter down the oil lines. I would still get a few drops but it is a relatively clean process. If you want to mount it low on the chassis rail there will be no gravity to move the oil from the filter back through the lines and then you will be having a messy time. So up high is ok but down low is a no go.

Well my speedo decided to shit itself going over Mount Nebo again and I thought it was just the cog, but to my elation when I pulled the speedo sender body out before, the cog and the other half of the drive weren't there. It is an RB25det conversion into an R32. Were could I get at the missing piece from? On top at the shifter? Or am I going to have to drag the gearbox out, are there any tutorials on this??? Thank you, Jarrod

I think the wrong plugs have rooted my coil packs. I changed the plugs and not two weeks later I need two new coil packs. I actually have an RB25det Neo motor and I am wondering what plugs to put in it? I have Splitfire coil packs coming in a week and I will be running 10Psi. Cheers, Jarrod

I was having this problem yesterday. Coil packs 5&6 went open circuit on me for no apparent reason. Drove to work, left the car for 8hours then jumped back in and on starting it it sounded funny. Went home and with a Mulit meter checked all the coil packs resistence , 1,2,3 were 0.6 to 0.9 but 4 was 1.4 and 5 and 6 were nothing. Splitfires on the way.

I forgot to mention it is a Rb25det Neo motor and gearbox with 84,000klms on them, not5 120,000klms.

Here is one I found, if you need a photo of any specific area let me know.

I have an R32 with an Rb25det conversion in it and the bloke who I bought it off could not tell me what model the RB25det was out of. (either series one or two R33 or R34). By supplying the engine number could someone please let me know what series or model it is from. Iam trying to buy Splitfire coil packs and there are a few different types for different RB motors. Engine number: RB25 3260587A Thanks in advance guys Jarrod

Make: 1989 Gts-t R32 Nissan Skyline Model: R32 Milage: 157,000 on chassis and 120,000klm on motor and gearbox Transmission: 5 speed manual Colour: Baysyde blue Location: Ipswich, 30minutes west of Brisbane in Queensland Complied? Yes RWC supplied? Yes Currently registered? Till the 21 of September Reason for selling? I am going to Townsville to work in a few weeks time and a Skyline is not practicall for me anymore. I have only owned the car for 5 months unfortunately because I would love to keep it. Price: $13,000 or nearest offer Contact: Jarrod on 0409695525 or just PM me Comments / Modifications: Chassis has 157,000klm on it RB25det and gearbox with 120,000klm SUN ROOF Trust front mount intercooler 3 inch exhaust all the way through 4 inch Heavy duty drive shaft Heavy duty clutch Full front end busher kit Koni coil overs in the rear and JIC shocks and struts up front 300ZX fuel pump GTR R33 front brakes with braided lines R33 diff 56mm ASI Radiator with twin 12 inch thermos. Drift oil and air filter. New 5w/50w pentrite oil went in 200klms ago. Also just changed gearbox oil 200klms ago. The engine is basically stock besides the exhaust, AFC, cooler, boost controller so it is extremely reliable and fast enough as is. Fibre glass bonnet New Mesh Grille off SAU Strobe lights behind grille Phillips Chrystall headlights, parkers, low and high beam. They were $250 for all headlight bulbs. JVC head deck JVC front comp splits JVC rear 6 inch two ways Apexi Neo AFC Apexi pen turbo timer Matrix Oil pressure guage Matrix Oil Temp guage Autometer Boost guage Greddy Profec B spec 2 Boost controller which I have wired to the two buttons on the steering wheel. GTR seat covers Rego till 21/09/2008 Tyres have lots of meat still on them. I still have the orginal bonnet also in the bayside blue. Negative. The bump near the fuel filler was done just before I bought the car and is not really bad. Paint is scratched and the small indentation could be pulled out easily, I just haven't had time with work. I have ordered 6 splitfire coil packs that will be installed when sold and I have also ordered a new speedo cable which will also be installed. Images:

I have done this conversion but I am not sure if I have done it properly. I have a R32 with the R33 motor and box. I bought the R33 cog and the Navara speedo and put the cog onto the navara center drive and then put it into the R32 speedo sender housing. I got 99.8klms out of it before it stopped working. Any ideas, was I surpose to leave it in the Navara speedo sender body and not change it over into the R32 speedo sender body????? At least it worked for a bit.

Remove from list please. I was banking on the close date being the 11th of April and I still have not heard anything. Have taken another quicker avenue. Organisation please.

Damn awesome grille. The fibreglass was that good it did not need any prep work before painting. Before and afters. Thanks again. Jarrod

I cut one and a half meters off my garden hose and ran it down past the brake booster and into the side/ top of the gearbox. Add a funnell and you are away.

Can you use a RB20det speed sender in a RB25det gearbox?????????????????????????????????????????????????? Been to Nissan, they can get the part but will the RB20det sender work in the RB25det gearbox?

DELETE ME PLEASE

LOCATION?

Item: NGK Iridium Spark plugs (six of) For RB20det or RB25det. Part number BCPR6EIX-11 They are the 1.1mm gap, perfect for up to 12pounds of boost. Age: 5000klms old if that or I installed them on Christmas, car only gets driven every second sunday Condition: Good condition, these last for 100,000klms so they have 95,000klms left in them. Price: They cost me $120 but will sell for $40 To Fit: (What car) RB20det or RB25det Location: Ipswich, Queensland, 4305 Contact: Jarrod on 0409695525 or Message me Comments: Postage will be extra.

I was just down at my local Supercheap to grab a six pack of plugs for my girl and apart from them not having any guide on Imports and the Bosch site on the net being useless, I am lost. I have NGK Iridium "BCPR6EIX-11" in at the moment but I want to get the new Bosch Fusion plugs. I think I need F1-6 but I am unsure especially sine they are $129 for the six. It is for an RB25DET out of an R33. Cheers guys

This is awesome, very good job indeed. I kept the same idea when I did mine but I changed it a little bit. Instead of using the stationary button idea, I used a MOMO steering wheel that I have had lying around which has the two "NOS" buttons either side. The main problem was going to be getting the feed from the Boost controller to the steering wheel which is always moving. So I used the 3.5mm audio jack and lead from JAYCAR which is the 'springy type' and i just soldered it to the buttons in the steering wheel and then plugged it into the Boost controller. Just had to cable tie it to the steering wheel and clamp it to the side of the steering column. If you use the leads from JAYCAR, the black is the ground, the white is the 5volt and the red is the 12volt. Will chuck up a few photos when it is completely finished. Top job DAZWAH

Not to mention the 100 degree oil that would be dripping on your shines if something did go wrong. Sell you mechanical one to some other stooge and get an electric guage and sender. Easy as to install and they are very accurate.

Not trying to contradict you because you are trying to help, in my Skyline manual it shows an input for a boost sensor on the ECU wiring diagram (it says, just on RB25det). I might just be looking to far into this and trying to find a problem when there is not one. I just like everything to be right, so if there is something broken I like to replace it.

I still have the map sensor sitting in the place in which you speak of, the rectangular looking gizzmo above brake booster. Is that the sensor for the dash cluster or is that something for the ECU?

I was changing some intercooler piping clamps and I saw this little fella sitting at the top of my RB25det towards the firewall. (in a R32) It has Hitachi boost sensor, PS66-01, 9219 Written on it and I am just wondering if this is the sender unit for my boost guage in my Skyline dash cluster? It looks to have had a feed on it but the bit to attach a tube to has snapped off. I want to know because I want to get a new one from the wreckers tomorrow since Nissan want $560 for a new genuine one. Please help so I am not wasting my money. Cheers, Jarrod