liampire

Hmmm, well here is a dynograph of my RB20DET with a Disco Potato, .82 rear. Almost reaches 300HP. I used an adaptor purchased from Garrett to mate the T25/T28 flange to the T3. I am looking to change the rear housing to .64 for more response. This is 1 bar boost.

For the people bagging out D2 coilovers have you used them before? I have a set of new D2's in my S13. They are perfectly fine. My brother had tein super streets in his Toyota Soarer, they were good also but from memory he paid $1800 and comparing them to the D2's there was no difference. If you are not taking your car to the track then you may want to look at Bilstein shocks and suitable springs to lower your car. In my opinion that would be a better street setup opposed to coil over suspension as they really are suited more so for the track. Alternatively if you are set on buying coil overs and want some piece of mind I suppose in terms of purchasing quality parts then HSD coilovers are known to be very good. Personally I wouldn't buy second hand unless you knew how old they were and how many k's they have travelled as there are so many buggered second hand coil overs in most imports. I suppose the same argument goes with people bagging out KKR turbos saying they are cheap chinese rubbish....yet the majority of people saying negative things have never used these parts.

I recently had some braking issues and my master cylinder was faulty. I thought I had a full R32 GTST M-spec brake conversion on my S13 however it turned out I still had the BM33 brake master from a standard S13. I went to Master Cylinder Exchange Service Wynnum and took my friends BM50 ABS master and did an exchange for a reconditioned non ABS BM50. It cost $275 and these are superior to a genuine nissan replacement as they have the stainless steel sleeve inserted into the bore. The part is guaranteed for life and the seals for 12 months. They say that a reconditioned master will out live the life of the car. Here is some handy information. BM50 Master (25.4mm diameter) S15 Spec R 300zx Turbo (also uses BM57 - 26.9mm) R32 GTST M-Spec R32 GTR non Brembo R33 GTST BM44 (23.8mm) R32/33/34 Brembo model BM57 Source: http://nissans15.com/brakes.htm

PM Sent Bumppp

Item Summary: R33 Alloy Radiator 52mm Dual Core Brand New in box Location: QLD: Brisbane, Ferny Hills Condition: Brand New in box, still in bubble wrap Reason for Selling: Not Needed Asking Price: 150 Delivery Methods: PickUp or can post at your expense Contact Info: Liam - 0400 124 322 Extra Information: Brand New. Never Been used. ASI Brand. My friend has one of these and they fit straight in and are more than twice the thickness of a standard radiator. You're not gonna find this anywhere cheaper! Pictures:

Item Summary: R33 Skyline Alloy Radiator (Brand New) ASI 52mm Dual Core Location: QLD: Brisbane, Ferny Hills Condition: New in the box Reason for Selling: Not Needed Asking Price: $180 Delivery Methods: PickUp Contact Info: Liam - 0400124322 Picture/s:

Other Parts 52mm Alloy radiator, dual core, ASI Performance, to suit R32/CA18, R33, SR20 - $200 Silicone radiator hose kits to suit above motors (3 ply) - $30 Bosch 044 pump unused in the box - $200 Haltech Interceptor - $500 12" Thermo fans (brand new, even have mount kit) - $30 each Ceramic heat wrap 10 metres (withstands 1200 degree heat) - $30 each (I have 5 rolls of this, unused) R32 RB20DET Parts Two standard RB20 turbos, good condition for age - $100 each Standard RB20 Exhaust manifold - $40 Standard RB20 injectors - $50 set (i have 2 sets) Standard RB20 fuel rail - $50 R33 RB25DET Parts Standard RB25 Exhaust manifold - $40 R34 GTT Parts Standard side mount Intercooler - $100 S13 SR20DET Parts S13 Carbon Fibre Bonnet. OEM style but reproduced in carbon fibre. Fibreglass reinforced underneath. $550 SR20 Greddy style sump. Exactly the same as Greddy. Unused. Includes the gated baffles. Has a drilled fitting for a oil temp gauge. $180 Most of this stuff is brand new. Let me know if you want pictures, otherwise it's pretty straight forward. Thanks for looking. Call or SMS Liam - 0400 124 322 Location - Brisbane Northside, Ferny Hills.

BUMP. Exhaust sold.

BUMP

SOLD

Here are pictures of the R31 catback exhaust system. It has a resonator and a Trust canon.

D1_Spec PM Sent And just for anyone that is interested: The oil sump including hardware & packaging is 3300 grams. Length 42cm, height 9cm, width 22.5 Express post anywhere in Australia is $18.50 for items 3001 grams to 5000 grams, guaranteed next day delivery.

BUMP, I have got plenty of radiators. I also have a carbon fibre bonnet for S13 silvia - $550. PM me for details.

BUMP, I also have a 3 inch cat back exhaust system for an R31 skyline. The piping goes under the wheel axle instead of bending over it. $100.00

Item: R32 Skyline Parts for sale Brand new R32 52mm Alloy Radiator dual core $200.00 See Pics Brand new 3 ply silicone radiator hose kit $30.00 See Pics 25/30 long motor. Head and block assembled, standard 25det head, standard 30 bottom end has done about 280,000kms, standard 20 cams, new head gasket, rear main, front main, camshaft seals, tensioner re-positioned, new timing belt, new exhaust manifold studs, new oil pump gasket (running standard 30 pump), new crankshaft sprocket and dust covers. All head and cam bolts torqued to spec from workshop manual. I wanted to complete this motor but it has become too expensive for me to continue with purchasing manifolds, injectors, turbo, ecu...this would be perfect for someone that already has a modified rb25det to use as a donor. $700.00 ONO RB20 turbo (Inc dump) $150.00 will take $100 minus dump RB20 turbo $100.00 Crank angle sensor $50.00 SOLD Harmonic balancer $20.00 Standard Camshafts $80.00 Standard Coil Packs $80.00 Bottom radiator hose $10.00 Cam and tensioner covers $10.00 Standard Plenum $50.00 Exhaust manifold $50.00 Standard Injectors x 18 $50.00 per set Fuel Rail x 2 $25.00 each Water pump pulley $10.00 A/C Compressor $50.00 Dr Drift chipped ECU tuned by Mercury Motorsport for 1 bar boost, 60psi base fuel pressure 205rwkw, see dyno graph below $150.00 R31 Skyline Parts for sale Minispool - Brand New $90.00 Tie rod end $25.00 Pair S13 Silvia Parts for sale Brand new SR20 52mm Alloy Radiator dual core $200.00 See Pics Brand new 3 ply silicone radiator hose kit $30.00 See Pics Brand new SR20 oil sump - greddy copy $180.00 See Pics S13 Passenger seat (inc rails) - good condition $20.00 THROWN OUT S13 Rear Seats - good condition $20.00 THROWN OUT S13 Bucket seat with rails - good condition $100.00 see picture SOLD S13 Door trims - 2 Driver, 1 Passenger $25.00 each S13 Suspension with rear Lovells Springs $150.00 S13 Subframe $50.00 Other Parts for sale R34 GTT intercooler $120.00 RB25 Coil Pack Cover $40.00 Location: Ferny Hills, Brisbane Northside Website: This one Item Condition: All in good working order Reason for Selling: Left over parts, no longer needed Price and Payment Conditions: Make reasonable offers but I didn't intend on taking offers unless stated ONO, you may get lucky . Extra Info: Radiators and Oil Sumps are from a group buy I organised. Turbos in very good condition, perfect for a straight swap if your standard one is damaged. Pictures: Contact Details: Call or Message Liam - 0400 124 322

Up for sale i have a RB20 afm The AFM works great i have had no problems and i purchased the AFM myself from all jap aprox 6 months ago i am only selling the AFM as i have upgraded to a map sensor price is $150 Contact me on: 0424046246 or p.m. me

am selling a Haltech Interceptor, I bought the interceptor and wired it in to the car but never got it tuned, So any map will be able to be loaded on to the interceptor. The price is $500 firm for more information visit http://www.haltech.com.au/index.php?option...4&Itemid=21 Contact me on: 0424046246 or just p.m. me

Hi i am selling a RB20 DET gear box. I bought this gear box from panel house at slacks creek and it was used on the car for aprox 2000 km. It shifts great and there are no noises. only selling as upgrading to 25 box. I am located at Ferny Hills Brisbane, $400 Firm contact me on 0424046246 for fast reply or just p.m. Pictures: looks like this

BUMP

BUMP

RB20 and 25 are much the same. The 32 ECU does not support variable valve timing however that is only active up to 3000rpm and honestly you don't notice any difference. This ecu was tuned for an internally standard rb25 series 1 motor with the high flowed standard injectors, kkr 430 turbo running 14psi, standard air flow meter, walbro 550hp pump, and usual exhaust and intercooler mods. Obviously it can run more than 14psi if you want to. Boost was increased to 18psi and was a very quick car. 14psi is perfect for street. More power can be had with a z32 afm however you would need a re-map which is quite cheap at around $200. With the correct turbo this setup can handle 300rwkw easily on a standard motor, 270rwkw for reliability day in day out.

Item: 7.5x18" Vault CRYSTAL Chrome multifit 5 stud & 4 stud(114.3) 2 Tyres are perfect, Federal 595 235/45/R18 (about $260 per tyre), the other two tyres are half worn. Was once on an r32 skyline. Location: Brisbane Northside - 4055 Website: Boostcruising.com and SAU.com Item Condition: Perfect Reason for Selling: Garage clean-up Price and Payment Conditions: $600 Extra Info: Pictures: Contact Details: PM or call Liam - 0400 124 322

Item: 1. Dr Drift Chipped RB20 Ecu for an R33 Skyline. 2. High flowed standard side feed injectors (800cc). Location: Brisbane Northside Website: Boostcruising.com & SAU.com Item Condition: Perfect Reason for Selling: Going back to standard setup Price and Payment Conditions: $650 Extra Info: Tuned at Mercury Motorsport. Have receipts and dyno readout. This ECU will not need to be re-tuned for these injectors. Swap in and drive. I can install these injectors for an additional cost Pictures: Contact Details: PM or call Liam - 0400 124 322

Supercheap auto, it's $8. Put of few dabs of super glue to the part and then stick the paper to it so it doesn't move around. Supercheap also sells a set of scalpals for $4 which is super sharp so you can cut it properly. Get some gasket sealer which is $14 and you are good to go. .8mm gasket paper is fine as it does compress once the part is all bolted in. Don't listen to what ppl say on these forums about it having to be the right size and this and that cos i've used this on plenty of cars and have stopped leaks good and proper and been on over a year and is perfect. People have made gaskets from kellogs cornflakes boxes and made a perfect seal. Mechanical stuff is not what it seems to be talked up to be

SteveL - Thanks for your input. I have the car up on jacks ready to take the box out tomorrow so I can sort it all out. The anticipation for this car is intense as it will be putting out some decent numbers on standard rb20 engine (230-240kw). I am so frustrated that I can't select gears! battery - I always make my own gaskets. A roll of gasket paper costs $8 and getting genuine stuff is way too expensive and too far for me to drive and I believe my handmade gaskets are better anyway. See picture below for the front main seal gasket. It's .8mm jointing paper. Use with gasket sealer and you have perfect seal. 2LV8ETR - I am not a mechanic but learn quickly through disassembly and diagrams.