stagea-rs4

This is the S2 climate control i've seen. Post #81 http://www.gtr.co.uk/forum/110150-removing...a-stereo-6.html

Thanks for the reply. The guys here in the UK that have had the door cards off say there is an open connector on the passenger side. Maybe yours was changed before you got it as it seems to be standard to have it not connected. I had planned to connect to the drivers side wire when it came into the car but it's not much fun being upside sorting through a loom. I'll have another go at taking the supply from the back of the rear demister switch.

As standard the Series 1 has heated wing mirror elements on both side but only the drivers side is connected. Has anyone managed to connect the drivers side to the same circuit? So far I've managed to confirm that it does work and have run wires into the cabin. I connected one wire to chassis ground and the other to what I thought was the same wire from the drivers side. The result is that it's on full time.

Cheers for the info but i'm currently in the UK. These have arrived from Driftworks. Just need it to stop raining now.

Could you have done this? Intake Pipe Mod

The original turbo grille does look awesome painted black and de-badged. This isn't mine BTW

Wouldn't the transfer case and floor pan be a bit of a hurdle for starters? Unless it's RWD.

Thanks guys. I'm guessing the upper arm is traction? Does this need playing with when doing the toe/camber? Also is the toe arm the same as S14, R33?

Hi guys. Have lowered the Stagea and after a bit inside rear tyre wear I installed adjustable camber arms. I took it in to have the alignment done and they couldn't get the toe AND the camber to a reasonable point. I've deduced that I need adjustable toe control arms as well. Which arm do I need to replace in the photos below? Thanks.

Nice write up. What part number are the rear arms? Are they the same as s14's?

Does anyone know what the equivalent rear upper adjustable camber arms are for a series 1?

Pulled the interior (to strip the roof rails) and there is no access to the louvres. They are clipped on really well. Can lift a corner no problem and they'll go with a bit of effort.

Hi guys, UK owner here. Has anyone removed or can offer some advice of how to remove these louvres? Cheers.