Lemzki

ok, your spraying 2k paint yes? so when your applying 2k enamel (solid colour) or 2k clear over basecoat (COB) you usually mix the paint at a ratio of 2:1. 1 being the hardener. you can buy different hardener rates from slow, medium or fast. at work i normally spray with normal (medium) at a bake time of 40mins at 65 degrees but a home i use fast it just speeds up the drying time. just make sure you give it a wipe with prepsol (aka wax n grease remover) and a strainer (paint filter) to avoid dirt n crap in the gun pot or use a stocking if you dont have any. if you need help with anything else just pm me.

yeh you could if its a home job.. atleast use fast hardener

yeh, ive topped up this morning at $1.15 per litre for the price of regular unleaded

thats a load of crap! coz im a spray painter myself. it all depends on the prep and the finish off the gun.

I found out the problem. the connectors behind the light switch on the dash was melted! thanks anyway for your help pplz

its got a mind of its own lol... it works now and then, cant help it if i need to get home but ill check out the switch this weekend. thanx

its hard driving at night! ive checked the fuse, globes and relay and the headlights still wont turn on. only the parklights stay on. can anyone out there help me out?

if it was me id charge around the 350 mark. it really depends on the skirts itself, could me screws, clips, and even urethane to hold them in place

heheh silver isnt that hard to match.. just annoying and time consuming at times as i am a painter myself

ive got the same problem with my 32 mode doesnt work and its always on 'auto'

hey michael you should be able to fit them with screws and probably need to pre-drill both ends of the skirt (on the car) as for paint it would be around $200 to $300 depending on what type of paint coz it aint cheap