Sydneyactionman

OFFERS?

Only a couple left

Checkout the link below to see I have over 200 positive feedback so your money is safe with me http://cgi.ebay.com.au/INJECTORS-NEW-SIEME...=item4a9d72ce1b Or here for bigger photos http://sydney.gumtree.com.au/c-Cars-Vehicl...QAdIdZ177076696

?

.

?

Any Pics? Single or Dual Solenoid? (SPEC S or R)

SIEMENS DENKA #3145 750CC INJECTORS NEW DIRECT FIT FOR GTR I have a BRAND NEW set of 6 high flowing manufacturer's Siemens Deka fuel injector's part number #3145. I bought 2 sets (this set was for a mate who I can't wait on any longer to pay). They are brand new & were only recently removed from the boxes to be flow tested & have since been vacuum sealed again for the sale (To be safe I have all my injectors tested before I use or sell them). As you can see they are a very good match with only a 5% unbalance & average of 770cc/min (excellent for injectors of this size). They come with a 1X 11mm top O-ring that I found does not fit my standard GTR fuel rail so I bought a heap of smaller O-rings I'm pretty sure are a 10.5mm. So I'll also included 12 of these 10.5mm O-rings as each injector can take 1 or 2 top O-rings. Part number: 3145 - 72lb low resistance. Flow Rate: 750cc/min, 72lbs/hr @ 43.5 PSI or 86.6lb/hr @ 58PSI 909cc/min. Coil Resistance: 2.2 Ohms / Low Impedance / Low-Z (Peak-Hold ECM drivers or injector driver/converter needed) Physical Dimensions: EV1 Body Type Connector: Minitimer (Bosch EV1) This same fuel injector you will also know as Accel, FAST, Holley, MSD, Precision Turbo, Rochester, etc. as all these companies take this fuel injector and repackage it as their own. Shop around & see what big Injectors sell for new I guarantee you won't beat my price. $540 Cash pickup From Bondi area $550 Paid by bank deposit or transfer (Express posted with Tracking) $565 Paid by Paypal (Express posted with Tracking) Email me at [email protected] if you have any questions?

DENSO 820cc INJECTORS SERVICED RRP$550+ Here I have a set of 4 Denso 195500 0830 Injectors that were recently serviced & flow matched & as you can see they average 820cc/min & a balance tolerance under 2% (injectors of this size you are lucky to get them to 5%) so they are a perfect set. They recently came back from INJECT A TEK where they were serviced (refer to photo) resistance & flow testing, ultrasonic cleaning & all filters & O-rings replaced. They have been vacuum-sealed & ready for sale. As you can see in the photo I can include either 10.7mm or 11mm new O-rings & I do have other seals & rubbers if required (probably best to use the ones that come off your injectors). Cash pick-up is preferred from Dover Heights postcode 2030. If postage is required, I prefer bank deposit or transfer. I will also accept paypal. Postage is included in the price & will be by Express Post 500gram Satchel, I send then Registered Post if you prefer for about the same price. I'll take $400 or the best offer?

Hey here is a stupid question Anyone know if the R32 GTR has a dash light dimmer? As I'm not the sharpext tool in the shed but I don't think it does. If it does please tell me where?

I’m putting a swoosh boost gauge in my R32 GTR Referring to the attached photo any tips on what I can put where? I was going to do it like this but would appreciate any better ideas Red (B+) = straight to the Bat + Black (ground) = to any earth Orange? I’m not sure about? Yellow (ACC) = to the Cigarette lighter + Brown (small lamp) I’m not sure about? Below is all I can find There are 5 wires that come from the gauge: Red wire - find a power source that ALWAYS has power going to it. Black is ground - no explanation needed Brown - dimmer switch basically. Find a wire that turns on only when you turn on your headlights/parking lights Yellow is for the ACC key switch - any wire that gets power when you turn your key to the ACC position Orange is for the "ON" the car power line that will not be disconnected at start of engine, from key switch - pretty much explains it. I'm assuming they added this wire to your gauge because it has a start-up function. Because I don't see why else you would need 2 different ign sources

LM-2: Digital Air/Fuel Ratio Meter NEW!!! p/n 3837 http://www.innovatemotorsports.com/products/lm2.php This kit retails for over $400, I can get them new for around $280 with full factory warranty, 1st line, no refurbished parts, Brand New just as if you were to order it directly from Innovate Motorsports. I'll be ordering 1 for myself in about a week so if any one wants one it's going to work out cheaper for us if I get more than 1 & we combine the shipping. Postage should be around $20 & add another $30 if you want the LM-2 Analog I/O Cable - P/N: 3811 - #3811 (not included in the basic kit) essential to connect the LM2 to your ECU. http://www.innovatemotorsports.com/xcart/p...=269&page=1 The LM-2 combines an air/fuel ratio meter and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meter’s digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. Patented “Direct Digital” Wideband Technology Wideband O2 Compatible with ALL fuel types Single or Dual Channel Version Available Playback log data on screen and/or with powerful LogWorks software (included) Large high-contrast graphics LCD Built-in RPM converter (direct frequency or with optional inductive clamp) 4 fully-differential analog inputs 2 configurable linear analog outputs Positive lock connectors for all connections USB connection to your PC The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user. The LM-2 Basic Kit (Single Wideband O2) includes the LM-2 meter, Bosch wide-band oxygen sensor, 8 ft sensor cable, cigarette-lighter power adapter, USB cable for PC connection, weld-in bung and plug, LogWorks software CD, and quick-start guide. I'll need around $100 deposit & can have it in about 3 weeks, if interested email me at [email protected]

USED Z32 AFM / MAF 300zx VG30DETT N62 AFM SR20DET CA18DET RB25DET RB26DETT 300zx Size 3" (80MM) Very common upgrade for SR20DET / CA18DET / KA24DE / RB25DET / RB26DETT / RB20DET / VG30DE and many others. Good upgrade to measuring more air flow when stock AFM / MAF gives up, these are good for up to 500hp. All my AFM's come with a plug, they are used but in perfect physical condition with no damage to the screens & includes the O-ring on the inlet side. I personally bench test all AFM's before offering them for sale. $180 if paying cash, pickup from Bondi area in Sydney. $190 Express Posted (Tracking Number) paid for by Bank deposit or transfer. $195 Express Post (Tracking Number) paid for with PAYPAL. Take $10 off the above prices if you don't require a plug. AFM's will be posted the same day payment is received so you will have it the next day. Email me at [email protected] or call me on 0403 702 449 with any question or if you want more specific photos.

USED Z32 AFM / MAF 300zx VG30DETT N62 AFM SR20DET CA18DET RB25DET RB26DETT 300zx Size 3" (80MM) Very common upgrade for SR20DET / CA18DET / KA24DE / RB25DET / RB26DETT / RB20DET / VG30DE and many others. Good upgrade to measuring more air flow when stock AFM / MAF gives up, these are good for up to 500hp. All my AFM's come with a plug, they are used but in perfect physical condition with no damage to the screens & includes the O-ring on the inlet side. I personally bench test all AFM's before offering them for sale. $175 Cash pickup from Bondi area in Sydney. $185 Express Posted (Tracking Number) paid for by Bank deposit or transfer. $190 Express Post (Tracking Number) paid for by PAYPAL. Take $10 off the above prices if you don't require a plug. AFM's will be posted the same day payment is received so you will have it the next day. Email me at [email protected] or call me on 0403 702 449 with any question or if you want more specific photos.

SOLD

I don't have a trader rating here so checkout the below link to see I have done almost 200 transaction on Ebay & I still have 100% positive feedback. http://cgi.ebay.com.au/Z32-AFM-NEW-300ZX-N...

PAY WITH PAYPAL & I CAN POST THEM EXPRESS OR REGISTERED ANYWHERE IN AUSTRALIA (ADD $15 FOR THE POSTAGE & 3% TO THE TOTAL TO COVER MY PAYPAL CHARGES)

SOLD

SIEMENS DENKA #3145 750CC INJECTORS NEW SEALED IN THE BOX. DIRECT FIT FOR SKYLINE GTR & OTHER I have a BRAND NEW set of 6 high flowing manufacturer's Siemens Deka fuel injector's part number #3145. Reason I'm selling them is I recently bought 12 at a great price (6 for my GTR & 6 for anyone out there looking for a new set at a very reasonable price). They come with a 1X 11mm top O-ring but I found will not fit my standard GTR fuel rail so I'm using a 10.5mm & I'll included 12X 10.5mm O-rings as each injector can take 1 or 2 top O-rings. Part Number: 3145 - 72lb low resistance. Flow Rate: 750cc/min, 72lbs/hr @ 43.5 PSI or 86.6lb/hr @ 58PSI 909cc/min. Coil Resistance: 2.2 Ohms / Low Impedance / Low-Z (Peak-Hold ECM drivers or injector driver/converter needed) Physical Dimensions: EV1 Body Type Connector: Minitimer (Bosch EV1) Shop around I guarantee you won't beat my price. $520 CASH Pick up from Bondi area in Syndey or $550 if you pay with paypal & I'll post them anywhere in Australia Express or Registered for free. Call or email me if you require more specific info 0403 702 449 [email protected]

SIEMENS DENKA #3145 750CC INJECTORS NEW SEALED IN THE BOX. DIRECT FIT FOR SKYLINE GTR & OTHERS I have a BRAND NEW set of 6 high flowing manufacturer's Siemens Deka fuel injector's part number #3145. Reason I'm selling them is I recently bought 12 at a great price (6 for my GTR & 6 for anyone out there looking for a new set at a very reasonable price). They come with a 1X 11mm top O-ring but I found will not fit my standard GTR fuel rail so I bought a heap of smaller O-rings I'm pretty sure are a 10.5mm. So I'll happy to included 12X 10.5mm O-rings as each injector can take 1 or 2 top O-rings. Part Number: 3145 - 72lb low resistance. Flow Rate: 750cc/min, 72lbs/hr @ 43.5 PSI or 86.6lb/hr @ 58PSI 909cc/min. Coil Resistance: 2.2 Ohms / Low Impedance / Low-Z (Peak-Hold ECM drivers or injector driver/converter needed) Physical Dimensions: EV1 Body Type Connector: Minitimer (Bosch EV1) Shop around I guarantee you won't beat my price. $520 ono Pick up from Bondi area in Syndey or you can pay with paypal & I'll post them anywhere in Australia Express or Registered for $15 Call or email me if you require more specific info 0403 702 449 [email protected]

Z32 AFM / MAF 300zx N62 AFM SR20DET CA18DET RB25DET RB26DETT New & Used Z32 AFM / MAF for a 300zx VG30DETT N62 model Size 3" (80MM) Will fit other vehicles, Good upgrade to measuring more air flow when stock AFM / MAF gives up, these are good for up to 500hp Very common upgrade for SR20DET / CA18DET / KA24DE / RB25DET / RB26DETT / RB20DET / VG30DE and many others. Cash pickup from Bondi area in Sydney or you can pay with paypal & I'll post them Express for $15. I have 2 new in the box (no plugs) & 4 used (with plugs) all in very good condition with very little or no damage to the screens & all have the O-ring on the inlet side. I've also personally tested all the AFM's. $250 for the new units or $450 for both (no plugs) $220 for the used units or 2 for $400 (including plugs) I also have a couple (not shown in the photos) that I can do for $180 (no plugs) Email me at [email protected] or call me on 0403 702 449 with any question or if you want more specific photos or info.

SIEMENS DENKA #3145 750CC INJECTORS NEW SEALED IN THE BOX. DIRECT FIT FOR SKYLINE GTR I have a BRAND NEW set of 6 high flowing manufacturer's Siemens Deka fuel injector's part number #3145. Reason I'm selling them is I recently bought 12 at a great price (6 for my GTR & 6 for anyone out there looking for a new set at a very reasonable price). They come with a 1X 11mm top O-ring but I found will not fit my standard GTR fuel rail so I bought a heap of smaller O-rings I'm pretty sure are a 10.5mm. So I'll happy to included 12X 10.5mm O-rings as each injector can take 1 or 2 top O-rings. Part Number: 3145 - 72lb low resistance. Flow Rate: 750cc/min, 72lbs/hr @ 43.5 PSI or 86.6lb/hr @ 58PSI 909cc/min. Coil Resistance: 2.2 Ohms / Low Impedance / Low-Z (Peak-Hold ECM drivers or injector driver/converter needed) Physical Dimensions: EV1 Body Type Connector: Minitimer (Bosch EV1) This same fuel injector you will also know as Accel, FAST, Holley, MSD, Precision Turbo, Rochester, etc. as all these companies take this fuel injector and repackage it as their own. Shop around I guarantee you won't beat my price. $570 ono Pick up from Bondi area in Syndey Call or email me if you require more specific info 0403 702 449 [email protected]

Z32 AFM / MAF 300zx N62 AFM SR20DET CA18DET RB25DET RB26DETT New & Used Z32 AFM / MAF for a 300zx VG30DETT N62 model Size 3" (80MM) Will fit other vehicles, Good upgrade to measuring more air flow when stock AFM / MAF gives up, these are good for up to 500hp Very common upgrade for SR20DET / CA18DET / KA24DE / RB25DET / RB26DETT / RB20DET / VG30DE and many others. Cash pickup from Bondi area in Sydney. I have 2 new in the box (no plugs) & 4 used (with plugs) all in very good condition with very little or no damage to the screens & all have the O-ring on the inlet side. I've also personally tested all the AFM's. $275 for the new units or $500 for both (no plugs) $225 for the used units or 2 for $400 (including plugs) Email me at [email protected] or call me on 0403 702 449 with any question or if you want more specific photos or info.

APEXI BLOW OFF VALVE, ADAPTOR & PLUG SUPRA GTR RRP$300+ I bought this off Ebay about 6 months ago but never used it. I bought it from a guy who's Supra was defected so has to pulled it off. It comes with an adaptor (no doubt for a supra) also a Turbo Smart plug. The dude I bought it from said it will also fit a Skyline GTR but I've never checked. I have no seller rating here so if you are not local I can list it on Ebay where I have almost 200 positive feedback. Email me at [email protected] if you want more information or call 0403 702 449 Pickup is preferred from Dover Heights postcode 2030. Postage is also possible but please I prefer payment by bank deposit (not paypal). I'm after $100 or the best offer?

I just got my hands on a used PFC. I have a datalogit I just need a file. Can anyone email me a good tune file that would get me to a tuner?