pointa32

As the topic states, after a R31 skyline, manual, not too worried about the condition. Must have rego and be ok mechanically. Call/text Michael 0438911374

As the topic states. Wanted to buy, VL commodore. Must be manual, not too worried about the condition just as long it has rego and is mechanically sound. Show me what you have, call/text michael on 0438911374

Well its a bit of a hassle weighing it all and measuring it all up. Plus I will have to have 3 seperate packages due to the weight, i reckon it will be about $100 or so. most likely more but i will wear the cost if that is the case. Michael

Have got 3 RB26DETT heads sitting around the shed. all 3 are damaged but repairable, would suit machinist or someone in the trade who could repair them and make some money off them. Head 1) Complete head, cams there. Cam bearing lobes are scratched a bit due to the clearences not being set properly or something like that. Needs line boring as the cam bearing caps must be too tight on the cams. Head was meant to be reconditioned when i got the engine, looks very clean etc but needs reshimming after its line bored. Head 2) Slightly warped but repairable. maybe 2 bent valves after problem with cam belt. missing 1 spring retainer etc but the valve is still in there. Pair of cams that came with that head but after the head is straightened it will need reshimming. Head 3) Havent got photos of this one atm, It is bare head as i used all of the bits to put into another head i had but i have got nearly all of the bits there to go in it, has got cams to match it. Needs combustion chamber welding up and then will need assembling and re-shimming Have got some shims there with the heads but generally i did an exchange with my head reconditioner as shims arent cheap when you buy 24 at a time. Could use all 3 to make 2 good heads, sell one to cover your costs and still have spares left over to sell or keep should anything happen to yours. I was going to rebuild them but i dont have the time as i have got too many other projects on the go and i want to clear some room for my new project. As i am on satalite internet it takes forever to upload photos so i have posted a sample of what i have got Would prefer text or call as i am not on computer very often. Michael 0438911374 http://www.skylinesaustralia.com/forums/po...9289-Head2a.jpg

disregard this post

Still got all 3 heads, sell all 3 for $600, need them gone as i need the room in the workshop. Thats right, 3 heads for $600, build 1 or 2 out of the 3 and still have spares left over

2 Nexen brand tires, 255/40/ZR17, overall good tread, worn a little bit on the inside edge due to wheel alignment but they are still legal on the inside edge and have got 3/4 tread on the rest of the tire. $150 pair Located in sheffield half hour from devonport Michael 0438911374

still got all. Will take $900 for the 3 or $350/head

Hey mate, have got a pair of 4 piston Alcons already set up to go onto a R32 gtr. Needs one small mod to the hub and thats it. Have got long range pads, big thick discs and they pull up awesome. Look good too. Fit behind a 16inch wheel, was thinking about going in targa so i got a brake upgrade that didint need me to change the wheel size. 2 years later they changed the regs and i could run a bigger wheel but i never got around to getting to targa. NOt sure whether they fit behind a 32GTR std wheel but they would fit inside an enkei i had. $2500 for the kit. Call me, Michael 0438911374

Hey mate, i have got a steering rack, yours for $30 plus the freight. Thats the problem though, i am in tassie freight will be the expensive part. If you get stuck give me a call 0438911374 Michael

$1000 firm for the whole 3, plus freight. May seperate the heads if i get enough interest

Head 1) Complete head, cams there. Cam bearing lobes are scratched a bit due to the clearences not being set properly or something like that. Needs line boring as the cam bearing caps must be too tight on the cams. Head was meant to be reconditioned when i got the engine, looks very clean etc but needs reshimming after its line bored. Head 2) Slightly warped but repairable. maybe 2 bent valves after problem with cam belt. missing 1 spring retainer etc but the valve is still in there. Pair of cams that came with that head but after the head is straightened it will need reshimming. Head 3) Havent got photos of this one atm, It is bare head as i used all of the bits to put into another head i had but i have got nearly all of the bits there to go in it, has got cams to match it. Needs combustion chamber welding up and then will need assembling and re-shimming Have got some shims there with the heads but generally i did an exchange with my head reconditioner as shims arent cheap when you buy 24 at a time. Could use all 3 to make 2 good heads, sell one to cover your costs and still have spares left over to sell or keep should anything happen to yours. I was going to rebuild them but i dont have the time as i have got too many other projects on the go and i want to clear some room for my new project. As i am on satalite internet it takes forever to upload photos so i have posted a sample of what i have got

Price, about $1200 for the 3 plus freight

Selling my coil pack cover suit RB26 Good condition, no screws for it though $50 plus freight Tomei Sump baffle to suit RB26, barely used. Was in engine for only a few months. Still in good condition $100 plus freight Nismo engine mounts. Done about 2000kms, still in dood condition $100 plus freight Michael 0438911374

Have got 3 RB26DETT heads sitting around the shed. all 3 are damaged but repairable, would suit machinist or someone in the trade who could repair them and make some money off them. Head 1) Was brand new old stock that had been stting around since new. I bought it and then threw rod out side of block which damaged the combustion chamber a bit and broke the valves off. Most bits there for it. Head 2) Head which is slightly warped. Needs straightening Head 3) Head which has had different cams put in, the clearences for the cams wasnt set properly so it damaged the cam journels and the bering caps etc. Complete but needs line boring Offers for all 3? or 1? I dont mind. If i get enough interest for parts i will part them out but i dont want to sell a couple little things as it will make it hard for the person who buys the lot. Pair of Nismo engine mounts, used but still in good nick $150 pair Tomei Sump baffle, used but was only in engine for a couple months, $150 Also, have got other r32gtr bits and pieces, std exhaust manifolds, heat guards, heaps of other little bits just ask. Would prefer text or call as i am not on computer very often. Michael 0438911374