Jump to content
SAU Community

GT-T 1998

Members
 View Profile  See their activity

  • Posts

    312

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Posts posted by GT-T 1998

    Removing Water Oil Cooler Rb25

    in Forced Induction Performance

    Posted

    Got a New Oil Filter Stud from Nissan today, one from a RB30, when in prefect.

    For those wanting to know, car is track only, running a oil cooler which will do much better then the oil to water cooler this way I've removed plenty of the water lines and got more room.

    As for you GT-T1998, you can basically do the same thing, the block on the RB25Neo is pretty much the same, the thread will be exact same, so just go to nissan and ask for a Oil Filter Stud from a RB30, I can post part number up later, cost me $19, Will be worth it.

    ohk .. so i can mount the oil filter stud from a rb30 straight onto the block? kinda like the rb20 mount?

    do you have a image of it ?

    is it as easy as putting an rb20det oil filter housing on ... ive had 2 of them so far both been cracked then went to another wrecker today and he had 1 with a crack in it to seems like no1 has them and its 15days for nissan to order 1 in from japan for 140bucks which i think is an ok price but my cars been off the road for 11days i want to try and have it fixed :( miss driving it .

    i seen on a post today someone put the big gold plug from the stock cooler onto a sandwich plate.. is that necessary what is it?

    Installing Return Flow Fmic

    in Tutorials / DIY / FAQ

    Posted

    I have that bar as well and didnt have to cut it either. I also only had to cut one side of the reo to get it back on. There was just a bit of messing around getting the return pipe and cooler up high enough so the undertray would bolt back up. No problems though and its lowered about 2 inches :D

    there was a bolt i didnt need in the kit coz for some reason it was to far to be bolted to the hole in the shasy lol.. didnt have a problem with the return pipe tho fit quite well above the gravel tray ... recently put a oil cooler n which is on the drivers side before the window washer bottle.. that sits on the grave tray hope it doesnt crack if i hit a bump

    Grex Sandwich Plate

    in Forced Induction Performance

    Posted

    so i was installing my oil cooler today after getting my sensor put in by my mechanic

    made sure i didnt over tighten anything then when i went to put the sandwich plate on over tightened it and snapped the tread on the engine..

    anyone have some idea how much im up for to get this part replaced

    Grex Sandwich Plate

    in Forced Induction Performance

    Posted

    hah there just 3/8 lines just get some charging lines from actrol.

    lol mate this isnt refrigerant hp/lp sensors

    I was just looking this up not 5 seconds ago..

    you need to get a -10an to 1/8 so probably best to go to rocket industries and get an auto meter fitting.. If possible take both with you so u can match it up.

    ohk yea i was looking online and found that peps and autobarn may sell

    this is the link

    http://www.speco.com.au/gauges_ad.html

    then go to Distributors and give u a list

    .

    you wouldnt happen to know where the sensor should be put since there is a thermostat in it

×
×
  • Create New...