R33ram

sounds good mate...what address in hampton park? cheers!

Any of the 2 marks in the pic be ok,is that what you mean like that or am i wrong....

do u mean like closer to the turbo as in on top of intake....i put 2 marks on the pic here...im not real good on this as i bought car with that intake.

Im located in melbourne south eastern suburbs dandenong..

What if i just swapped over the black catchcan one with the blue one that be closer yea or does it need more closer?

Just tested it again with no gear changes just flat out full throttle right through the rev range and perfect and then tryed it 1st through to 3rd and just cut out throught the gear changes like a jerk type and then bang goes again but every gear change was making a sound like back fire type like pooof and dropped revs and went again...sound was coming through the pod and it wasnt the bov sound or turbo flutter...

the bov is facing towards the front of car for adjusting....

im using a greddy copy face foward plenum and bov is the vulture motorsport ones and from the throttle body side its plum back all the to the turbo intake which is a 3inch metal pipe intake to turbo... it is very far to the turbo the bov.....

power fc and tuned..aftermarket bov plum back..

hey guys, just abit of help on why when i put my foot down full throttle it goes great in any gear but between gear changes like from from (first to second gear) it goes from say shifting at 5500/5800 and cuts out like for 1 sec to 4900rpm and picks up again...Does it most times and when it doesnt just wheelspins like crazy...Ive got new coil packs YJ and ive tryed the spark plug gap thought it might be jumping the spark and that but nothing....only does it through shifting gears at full throttle and hardly cuts out at all when just putting ya foot down in any gear.. thought might be afm but its just through gear changes. any ideas.....

yea get it checked tommorow but hate taking it to mechanics as they are always like what noise lol Is there any damage to be done or is it just a noise that gets annoying and no affect to engine besides that? I did put a bit of wd40 or it got in there and became louder lol so most likley the cause is what you saying....

maybe a silly question but am i gonna stuff anything up by removing the cover like timing and that or need to mark it...dont wanna stuff anything up and doesnt run ,??

hey guys just a quick question... have this noise coming from my cam cover. when its cold sounds a lil loud with revs around 1200/1300 rpm. when i rev it goes away after 1600rpm and when idling at around 900/1000 can just hear it a little bit. as it warms up it goes away at normal temp and goes away... heres a video of it similar to mine or almost identical to be honest at the last 25 secs of video. 100% from the cam cover as i rember month ago tigtning those allen key bolts there and got extremly loud then loosend them and went away but its back again. any ideas would be great or help on this as a few people have had this problem after reserching it but all different opinions...