Jump to content
SAU Community

Recommended Posts

Item: HKS 25/35 Turbo

Location: Melbourne

Item Condition: Brand New, no kilometers, picked it up today!

Reason for Selling: Want to go bigger!

Price and Payment Conditions: $1800 + PP

Contact Details: 0400215212 or [email protected]

I just picked up my newly rebuilt HKS 25/35 turbo from RacePace, which I destroyed at Calder last weekend. Anyway, the turbo core has been replaced with a brand new item which was quite costly. The old compressor and exhaust housing were the old parts taken from the old turbo so this thing is pretty much brand spanking new. It made 240rwkws (RacePace Dyno) on my car which runs a completely standard engine.

Price = $1800

Brand new these are about $2200 I believe and mine is pretty much brand new, 0ks!

For another $300 I will also thrown in the custom made dump pipe that helped this turbo make its rear wheel figure :D This dump pipe has a separate pipe for the internal wastegate that is typically plumbed back into the exhaust. However, this one does not plumb back making it a screamer pipe, its loud but can be plumbed back in very easily. Here are some videos of the screamer pipe.

Videos:

Screamer_01.avi

Screamer_02.avi

Screamer_03.avi

post-9676-1140224136.jpg

post-9676-1140224237.jpg

post-9676-1140224377.jpg

Link to comment
https://www.sau.com.au/forums/topic/106199-new-hks-2535-turbo/
Share on other sites

Pics added, despite appearances this turbo is brand new (the core), just the exhaust and compressor housings are second hand which does not matter. The build cost $1600 at RacePace Motorsport! The initial cost of the turbo second hand was $1600 so I have spent quite a bit on this sucka.

this is an awsome turbo, got one in my car never been so happy. it comes alive early and kicks in agen bout 5krpm, power just keeps coming till red!!

my car made 234rwks can make more but im running stock injectors, this turbo can easily make 250rwkws.

good luck mate :)

Either it was just its time or I didn’t let it cool down enough. I gave it a few really hot laps at Calder and didn’t give it a good enough cool down period. The HKS turbos are very hardy but when you use them on the track and don’t look after them properly they can break :) The exhaust wheel drooped because I turned it off when it was obviously still way to hot … stupid!

RacePace – 97629421

These are the best upgrade from a standard turbo, depending on who you speak to a standard turbo makes about 170rwkw running 11psi off a good tune. The 2535 will boost this to about 240rwkw which is a massive difference :unsure:

MORE33BOOST - 11psi made 240rwkw ... obviously you can go higher.

gtrGhosTDoGG11 - I imagine about $20 for normal post. I can find out for you.

justin911 - will consider it but I think it will sell anyway. sorry!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...