Jump to content
SAU Community

Power Fc Hand Controller Urgently Needed To Borrow

DRIFTPIG

By DRIFTPIG,
in Victoria

 Share

Recommended Posts

DRIFTPIG Enthusiast

DRIFTPIG

Posted
Posted

Hi guys/gals,

I have been told that my power fc may have re-initialised and needs the boost control mode "disabled". Unfortunately i do not have a hand controller. The even worse problem is that the car is supposed to be in a wedding next weekend!!!! I have tried buying one, but not only is it $500 odd bucks i dont have, but they couldn't get it here in time. I am willing to travel to melbourne or bendigo or really anywhere within an hour or so from Ballarat, if you were willing to meet halfway i'd be willing to pop $50 odd bucks in ya pocket for the hassle. I would only need it for 15-30 minutes tops so you could wait while i used it, (to ensure i dont take it, cant be too trustworthy these days).

I have borrowed ones before and now belive the one i'm after is for PFC RB25 version of power fc. There are in fact 2 versions of the power fc for r33's! The other is the ECR33 one. On the back of the hand controller it should have FCC NT somewhere on it, if it does, this is the one i need. I already have access to the other skyline one which has FCC3 on the back....This one does not work with my ecu.

My mobile number is 0408532977, my email is [email protected].

If you can help me out please reply to this post, pm me, email me, or call/sms me anytime.

Thanks to those who even took the time to read this.

Kind regards

Danny

DRIFTPIG Enthusiast

DRIFTPIG

Posted
  • Author
Posted

yeah thanks anyways, at least i know ppl are lookin to help if they can! lol thought since i got my hands on a r33 one that it would be all good, only to find out that FCC3 doesn't work and FCC NT will work!! DAMN IT!! I'm pretty sure that wrx ones are all FCC NT handsets prior to 2001 models too. And some sr20 ones and some R32 GTR models are compatible. Basically from what i've read if it has FCC NT on the back of handset it "should" work!

Cheers, and thanks again

DRIFTPIG Enthusiast

DRIFTPIG

Posted
  • Author
Posted (edited)

nope, just 2 different hand controllers for them

different version of the 2 yeah, but if you have a power fc on a skyline then one of these 2 will work.

Edited by DRIFTPIG

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Dose Pipe Sutututu
      new 1.5 LSD issues/concerns

      By Dose Pipe Sutututu · Posted

      Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • MBS206
      Most women will agree that parking is the most taxing part of driving

      By MBS206 · Posted

      It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...