Jump to content
SAU Community

Recommended Posts

Hi,

I bought two brand new Dynamat Xtreme Bulk Paks for $299 my local car audio shop. I was planning to seriously sound deaden my whole car, but have since bought a new car and no longer need them.

They have never been opened and 1 kit will easily sound deaden your whole car. With Each kit containing Nine 45.7cm x 81.2cm pieces.

I am looking for $249 each or $239 each if you buy both. Pick up in Hills Area Sydney ok or willing to post $19 Aust Wide courier.

Please contact me on [email protected] or 0405 909 347.

d7.jpg

What Dynamat Says:

Apply Dynamat Xtreme to your vehicle's resonant surfaces and enjoy improved clarity, loudness and bass response from your car stereo.

High-performance Dynamat Xtreme is lighter than Dynamat Original, four times more effective and requires no heat to apply!

It is recommended for vehicle tops, sides and contoured areas. Dynamat Xtreme is coated with aluminum for high temperature areas such as firewalls and floors. Kit contains nine 18" x 32" pieces of Dynamat Xtreme for a total of about 36 square feet (a car door requires about 5 square feet).

Can be used for rear decks, doors, floors and boot floors. Unlike Dynamat Original, Dynamat Xtreme is also recommended for trunk lids, roofs, quarter panels and under-hood installations.

Designed especially for high-temperature areas and high sound pressure level situations, Dynamat Xtreme offers four times the damping power of Original Dynamat, thanks to its energy-reflective aluminum layer.

Dynamat Bulk Pak

Part Number: # 10455

Contents: (9) 18"x 32" (457mm x 812mm) pieces of Dynamat Xtreme

Application: Use on rear decks, doors, floors and the floor of your trunk to get more bass, more music, lower road noise and better sound.

Guys?

Anyone interested???

$239 I gotta get rid of them. Huge saving off RRP and they're the best quality stuff you can buy.

Hi,

I bought two brand new Dynamat Xtreme Bulk Paks for $299 my local car audio shop. I was planning to seriously sound deaden my whole car, but have since bought a new car and no longer need them.

They have never been opened and 1 kit will easily sound deaden your whole car. With Each kit containing Nine 45.7cm x 81.2cm pieces.

I am looking for $249 each or $239 each if you buy both. Pick up in Hills Area Sydney ok or willing to post $19 Aust Wide courier.

Please contact me on [email protected] or 0405 909 347.

d7.jpg

What Dynamat Says:

Apply Dynamat Xtreme to your vehicle's resonant surfaces and enjoy improved clarity, loudness and bass response from your car stereo.

High-performance Dynamat Xtreme is lighter than Dynamat Original, four times more effective and requires no heat to apply!

It is recommended for vehicle tops, sides and contoured areas. Dynamat Xtreme is coated with aluminum for high temperature areas such as firewalls and floors. Kit contains nine 18" x 32" pieces of Dynamat Xtreme for a total of about 36 square feet (a car door requires about 5 square feet).

Can be used for rear decks, doors, floors and boot floors. Unlike Dynamat Original, Dynamat Xtreme is also recommended for trunk lids, roofs, quarter panels and under-hood installations.

Designed especially for high-temperature areas and high sound pressure level situations, Dynamat Xtreme offers four times the damping power of Original Dynamat, thanks to its energy-reflective aluminum layer.

Dynamat Bulk Pak

Part Number: # 10455

Contents: (9) 18"x 32" (457mm x 812mm) pieces of Dynamat Xtreme

Application: Use on rear decks, doors, floors and the floor of your trunk to get more bass, more music, lower road noise and better sound.

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • If there's enough meat in the housing where you want to put the M12 adapter, then do it, but be aware that if/when you f**k that up you'll probably be repairing it before doing anything else. I'd just drill it out and tap ina 1/4" thread. No need for rocket surgery when the next most obvious thing will do. You could throw a 1/4 x 1/8 bush in there and use the same fitting you intended to use.
    • Is the only issue that the oil catch can is getting filled on hard runs? I'd be thinking more about oil control issues rather then the head lifting, especially as you aren't seeing spiking in the coolant pressure.  Do you need restrictors in the head, or better drains from the head? Does the sump need venting to the catch can?
    • Tried to make 1/8npt threads into compressor house of the turbo for my EBC. Threads got fu#ked and ended up with and elongated hole, so I do have good amount and nice threads 90% of the hole but 10% I only had 1-2threads there and rest of it is flush on that side of the hole.. So my idea is to do M12 x 1.25 to AN4 with braided lines instead of 1/8npt to 4mm vacuum silicone hose.  and hopefully get a better thread. M12 is quite big and AN4 is a little bit bigger than 4mm (4.9mm inner diameter braided PTFE hose). but this should work. Thoughts? Otherwise I will weld and adapter onto the turbo.   
    • Looks great, I hope everything is working well after all that time!
×
×
  • Create New...