Jump to content
SAU Community

Recommended Posts

hi guys, i tried a search. just a quick question....

is there an fpr that will be easier to fit ( or any benifits ) to the rb25det?

sard, malpassi.......etc

Malpassi's are good for paper weights and are a good band aid fix for leaking injectors. Sards are very good, but the standard FPR is just as good(just doesn't have any adjustment). Why you need a FPR?

Link to comment
https://www.sau.com.au/forums/topic/112846-fprs/#findComment-2081041
Share on other sites

rob... hopefully getting bigger turbo soon and i'm under the impression that i can use a fpr to get a few extra kw's. i have 200rwkw now with pfc standard turbo 10 psi.

Can i max injectors and afm and get about 230rwkw with fpr and turbo?

will be getting z32 afm and injectors ( i cant afford them yet )

Thanks for the info Plasticstan ;)

Edited by handyandy
Link to comment
https://www.sau.com.au/forums/topic/112846-fprs/#findComment-2081356
Share on other sites

Nismo is definately the way to go if you are after bolt on simplicity, and it works well.

Be careful stretching stock injectors, I have seen so many RB25s go bang because they push the fuel system to the limits - its a shame because the RB25 can handle decent power if you just do things right and dont cut corners.

Another use for fpr (other than stretching the stock injectors) is to dial up the correct base pressure for aftermarket injectors. Sard, Nismo, HKS etc all rate their injectors at a base pressure (at idle) of 3.0kg, instead of the stock 2.55kg. The sard 550cc injectors, for example, are only rated at 520cc with base fuel pressure at 2.55kg (this is from the AP engineering site)

I asked a japanese performance mechanic to check my car to see if I was missing anyting - internally stock rb25 with 320rwkw. He suggested I should fit a fpr to bring base fuel pressure up to 3kg (sard injectors) - It was explained to me by him that using 3kg was 'best' for idle, fuel correction, accel enrichment etc when using power fc.

Link to comment
https://www.sau.com.au/forums/topic/112846-fprs/#findComment-2081639
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I was just driving into work and while on my drive, I went to accelerate and noticed the car would sputter/hesitate and I’d hear a few pops from the exhaust before it started going faster. Then I also noticed that when I push my clutch in, the car would die. This all started happening today. Any ideas?
    • That is a lovely Volvo, just saying. Yes I should have got an 260RS when they were cheap. I do regret now.
    • ^ lots of good points made above. The thing is, "aggressive" or "flush" fitment is relative depending on how much you have been influenced by social media. My starting point is always "look at the Nismo RWD specs". That is where you should start, then start measuring as GTSBoy as sort of mentioned, because every car will be slightly different. My 8.5"+35/9.5+38 will not be "flush" enough for you because you want more "pumped" look, which is why you measure. Tyre sizes and brand/models also make a difference. Some tyres are more chunky/square, some are more rounded. That means you could get away with more aggressive offsets without rubbing. But then it also depends on your ride height. Also depends on how much your car copped damage before being shipped from Japan. So it goes back to measuring your car yourself and determining what can work. Those Nismo specs are used bacause it's a safe spec for standard car (suspension. body) with chunky tyres. But then I put 265/35 wide tyres on R34 GT-R wheels, and currently run 285/30 tyres on 18x10 wheels.
    • Sounds pretty awesome. I recommend creating a new build thread and posting all your goodness in there.
×
×
  • Create New...