Jump to content
SAU Community

FS: GAB Revolution Stroke 2

ed
 Share

Recommended Posts

ed Grand Master

ed

Posted
Posted

These have been used for about a week or so and removed b'cos the softc*** said they were too hard....:bahaha:

gab1.JPG

gab2.JPG

gab3.JPG

gab4.JPG

gab5.JPG

It was pulled out and the seller (James) is chasing $3,700HKD (Hong Kong Dollars) shipped via EMS

His email is jc_333 at yahoo dot com

They were pulled from a 34GTT but the shocks' part numbers are for a 33GTR so will suit either.

EDIT: here are the details from him...

GAB REVOLUTION STROKE 2 (Height & Dampen Adjustable)

Front/4 steps and Rear/8 steps dampen adjustable coil

overs

Rear shocks (Short)

Lot #QE ?16-X

GKV9395A

KYB HE26

Front shocks (Long)

GKA9795

KYB HF12

springs are "sustec pro japan" aka Tanabe

EDIT2: We assume the springs are these :

http://www.rd-tanabe.com/english/sus/pro21...210/pro210.html

Sustec Pro 210

This is a direct roll type spring developed with merits as light weight and strong durability. The looseness of former direct roll type springs was a weak point, but new one is overcome with high tension steel material and Tanabe's knowledge. It corresponds not only for driving at circuits and winding drive, but also for comfortable general drive.

Link to comment
https://www.sau.com.au/forums/topic/12486-fs-gab-revolution-stroke-2/
Share on other sites
  • 2 weeks later...
FLIP Rising Star

FLIP

Posted
Posted

oh ok. ya i have a photo but its at my comp at home. Ive seen a pic of your car it looks really good. I like the front bumper and the bonnet. My car is pretty much stock all i have is a pfc, xhaust, bleed valve, and filter. Nothing great am still trying to save and make some money hehehe

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • GTSBoy
      Looking for someone with a R34 front bar

      By GTSBoy · Posted

      That looks good, but I think you're going to need much beefier side skirts now.
    • GTSBoy
      Most women will agree that parking is the most taxing part of driving

      By GTSBoy · Posted

      They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • GTSBoy
      M35 Brake caliper replacement

      By GTSBoy · Posted

      Define "starting to fail". Wy not just rebuild them?
    • GTSBoy
      S1 rb25/s14 starting problem

      By GTSBoy · Posted

      Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...