Jump to content
SAU Community

Recommended Posts

Item: 17x8" Rims offset +35 5-stud multi fit

Location: Melbourne

Item Condition: Good condition some gutter rash but nothing major.

Reason for Selling: New rims

Price and Payment Conditions: $450 urgent sale may consider swap for some other stuff.

Extra Info: Comes with 235/45 Dunlop SP Sport Tyres 60% tread

Contact Details:

PM or msg on 0406004135

post-31149-1158884762.jpg

Link to comment
https://www.sau.com.au/forums/topic/135432-17x8-rims/
Share on other sites

i fairly sure you can say sold on them, there actually for a friend they'll be checking out this link soon i'll know tonight if they want them so i'll let you know by tomorrow

Link to comment
https://www.sau.com.au/forums/topic/135432-17x8-rims/#findComment-2540866
Share on other sites

  • 3 weeks later...

Alright Guys 3 different Price Options:

$400 Gets you rims, locknuts and 6 tyres all with roadwothy tread on them.

$350 Gets you rims locknuts and 4 tyres.

$250 rims With locknuts but no tyres.

Prices are not negotiable this is dirt cheap. And these rims are in good condition.

post-31149-1161215339.jpg

Edited by zorb_rules
Link to comment
https://www.sau.com.au/forums/topic/135432-17x8-rims/#findComment-2595910
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...