Jump to content
SAU Community

Recommended Posts

Hi all,

For a stock gtr34 engine + intercooler + dump pipes.

With Apexi pfc +twin pot filters + 3'' front pipe back + 1.0bar of boost.

What's power figure at awkw or rwkw ?

0-100kph time ?

0-400m time ? street condition (with rear seat and spare wheel)

Thanks !!

Link to comment
https://www.sau.com.au/forums/topic/151022-gtr34-power-figure-with-some-mods/
Share on other sites

wow cool !!

but how come your 1/4 time is so quick compares to 0-100 time ??

others said, to run high 11s or flat 12.0s you should make at least around flat 4.0s for 0-100 ??

anyway, that's amazing for such simple mods. Hoped mine could do that too.... cheers

My 34 GTR has pretty much those mods trust intercooler ,power fc, cam gears, exhaust and intake mods stock turbos and engine etc has put out 345 awhp/260awkw or around 280-290rwkw and has run a best of 12.3 @ 112.5 mph but was squatting at the rear on launching off the line so could only do 2 sec 60 ft times really needs some suspension work i think, this was done on a pretty average track here in townsville on a warm night so should be able to get the 60 ft down to 1.7-1.8 and run high 11 sec, my blogg has a dyno sheet and a few photos http://gtr13.blogspot.com

Edited by gtr13

ohh boys.!! :P

i gotta do something about my car cause it really sucks to produce only 220 awkw with those mods !!!

so it didn't go like it should...cheezzz... I should bring it to somewhere else to have a proper tune...any suggestions guys???

Where and who's the real gtr34 tuner (in Melb) ?? .....cheers. :P

ohh boys.!! :happy:

i gotta do something about my car cause it really sucks to produce only 220 awkw with those mods !!!

That will depend on the dyno of the day dude , don't take to much notice of the power it makes, take it to the strip and see what trap speed you gat that will give a better indication of the average power tha car makes in the RPM you are using.

Stock turbos will not give you a lot of power up high but with mods you are listing you could see a high 11 or flat 12 pass.

I have less mods than you in mine but with HKS GTSS turbos + my car is heavier than yours and I still managed 11.8 at 118 mph.

well..., with the current mods and power (220 awkw, winter 15C)...mine did [email protected] on 20C day...SUCKS.. :O ... cause i've got twin plate as well...so no excuse at all..!!

I asked around, people told me to get it re-tune cause it should produce around 240-250 awkw and an easy flat 12s like you guys did !!....

It seemed showing me that i'd waisted money and trust on the previous tuner.. :D ..and it's about time to place another bet to win some decent records.. :cool:...hopefully........

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
    • That's my life. Past-Duncan has a lot to answer for
×
×
  • Create New...