Jump to content
SAU Community

180sx Kustom Kandy Teal 248rwkw Chrome Engine Bay Sr20det Manual

SXY

By SXY,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

SXY Enthusiast

SXY

Posted
Posted (edited)

FOR SALE IS MY 1992 180SX SR20DET

SELLING DUE TOBUYING A HOUSE AND THE MISSUS SAYS MY TOY NEEDS TO GO!

CAR OWES ME OVER $35,000++

56,000KMS 2ND OWNER IN AUSTRALIA 1ST OWNER BROUGHT THE CAR BRAND NEW IN JAPAN AND BROUGHT IT OVER WITH HIM WHEN HE MOVED HERE

BEEN OF THE ROAD FOR A YEAR FOR GROUND UP REBUILD

+++ CAR HAS AUSTRALIAN COMPLIANCE AND HAS BEEN PREVIOUSLY REGISTERED+++

NEEDS BLUE SLIP FOR REGO

FOR BLUESLIP REQUIRES

FRONT SEAT BELT BUCKELES

FRONT BAR FITTED

HEADLIGHTS WIRED UP

CAR HAS MADE 248RWKW AT 16PSI TUNED BY CROYDON RACING

NOW HAS MICROTECH ECU

EXTREME HEAVY DUTY CLUTCH WITH A MONSTER LOAD RATING AS THE EXCEDY ONE FAILED ON THE DYNO WHICH WAS BRAND NEW!

NOTHING TO SPEND ON THIS CAR AT ALL IT'S ALL DONE!

ENGINE:

GT28R BRAND NEW

PIRTEK BRAIDED LINES

B&M OIL COOLER WITH BRAIDED LINES

TUNE AGENT STAINLESS STEEL MANIFOLD

CHROME ROCKER COVER

CHROME OIL CATCH CAN

CHROME RADIATOR OVERFLOW

S15 RADIATOR

TWIN THERMOS

HYBRID GT SPEC INTERCOOLER

ENGINE FAN REMOVED

SARD 850CC INJECTORS

FORGED PISTONS

NEW RINGS

PRETTY MUCH OTHER THAN THAT STD REBUILD

NEW CLUTCH

MACHINED FLYWHEEL

BLUE WIRING COVERS

ALL FUSE BOXES REMOVED FROM ENGINE BAY ALL HOLES SMOOTHED

G-REDDY INTAKE PLENUM PAINTED SAME COLOUR AS CAR

NEW WATER PUMP

DUEL STAGE BOOST CONTROLLER

MICROTECH LTX8

3" TURBO BACK EXHAUST

NISMO STRUT BRACE

EXTERIOR:

16" AME CHROME WHEELS

VERTEX BODYKIT

FRONT BAR HAS CLEAR INDICATORS FLUSH MOUNTED

REAR WING DELETED

CLEAR VT STYLE SIDE INDICATORS

HOUSE OF KOLOR KANDY BLUE TO AQUA IN DIFFERENT LIGHT BARE METAL RE-SPRAY IN AND OUT

NEW WINDSCREEN

NEW RUBBERS

HANDLES AND MIRRORS ALL COULOR CODED

NEW LOCKS THROUGH OUT

SUNROOF

SUSPENSION:

JIC REAR COIL OVERS

HKS FRONT SHOCKS AND SPRINGS

ADJUSTABLE CAMBER ARMS

INTERIOR:

S15 FRONT SEAT NOT A MARK ON THEM

AUTOMETER 2 5/8" BOOST GUAGE

DIGITAL HEAD UP DISPLAY ALL WORKING!

DARK GREY AND BLACK INTERIOR

AFTERMARKET STEERING WHEEL

CLIMATE CONTROLL

POWER MIRRORS

CENTRAL LOCKING ECT..

CAN ALSO HAVE THE TAN INTERIOR FOR EXTRA COST WILL NOT SELL SEPERATLY UNTIL CAR IS SOLD! BUYER HAS 1ST CHOISE ON IT

TAN CARPET

SWADE ROOF LINING

SWADE MATERIAL FOR SUNVISERS

ALL PLASTICS TAN

MATERIAL FOR TRIMMING THE SEATS INCLUDED

DOOR TRIMS ALREADY TRIMMED

CUSTOM DASH WITH 3 2 5/8" HOLES FOR AUTOMETRE GUAGES TAN TRIMMED ALREADY

ALL DASH PLASTICS SILVER

LOOKING FOR AN EXTRA $2000 INCLUDES SEATS TRIMMED

OR $1500 SUPLY MATERIAL ONLY NOT SEATS NOT TRIMMED

++TAN INTERIOR NOT FITED! AT THAT PRICE++

ANY QUESTIONS FEEL FREE TO CALL 0417826725 OR PM ME!

WILL ALSO GET A GOOD UTE LOAD OF SPARE PARTS TO GO WITH CAR IF WANTED

steven012.jpg

steven010.jpg

steven006.jpg

steven007.jpg

steven005.jpg

steven008.jpg

steven004.jpg

PRICE IS $18,500 ONO WILL SWAP FOR CAR OF INTEREST JUST PUT IT UP HERE DETAILS AND PICS WHETHER STRAIGHT SWAP OR CASH MY WAY

LOCATION OF CAR IS CAMPBELLTOWN NSW AUSTRALIA!

Edited by SXY
jap80x Apprentice

jap80x

Posted
Posted (edited)

hey mate, juts wondering how you got 248rwkw's

one of my mates owns an 180sx as well,

he has the sr20 with gt28/71 turbo (bigger then yours), power fc computer, 3" exhaust, front mount intercooler, pod filter, 550cc injectors, 500hp walbro fuel pump, z32 air flow meter, bov, and he made 292rwhp at 16psi

cheers jai

Edited by jap80x
SXY Enthusiast

SXY

Posted
  • Author
Posted (edited)
hey mate, juts wondering how you got 248rwkw's

one of my mates owns an 180sx as well,

he has the sr20 with gt28/71 turbo (bigger then yours), power fc computer, 3" exhaust, front mount intercooler, pod filter, 550cc injectors, 500hp walbro fuel pump, z32 air flow meter, bov, and he made 292rwhp at 16psi

cheers jai

power fc tune could be very safe, z32 restrictive mine doesnt have a airflow meter, 500cc smaller than mine 850cc, ive got aftermarket plenum, differnt exhuast, different manifold, his engine might not be as fresh, mine has cams and valve springs unsure as was of actual spec as they were in car when i got it, different mods and brands of item will differ performance

biggest differance all engines are differnt even from factory they will give differnt power readouts on a dyno. second all dynos are differnt he could have went some where with a lower ready dyno, mine could have been done at a higher reading dyno, quater mile times are the only way to test a cars speed truly but these cars where made for drifting so depend what your after in a car in the end

hope i help answer your question

Edited by SXY
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • oHBoy.
      Starter motor replacment teeth count.

      By oHBoy. · Posted

      Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • niZmO_Man
      J50 clock date suddenly reset to January 1

      By niZmO_Man · Posted

      Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • niZmO_Man
      Wheel Sizes & Offsets For Skylines

      By niZmO_Man · Posted

      8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...