Jump to content
SAU Community

Recommended Posts

can i ask what for?

Anything that is engineered will probably be refused anyway. Regency and police are exempt from the law if they think anything goes against ADR laws -in their mind- then it is defectable and will not be allowed on the road. This is with a certificate and engineered product as well.

I know a friend spent over 2k getting suspension engineered that would pass aus wide ADR laws, and it was knocked back.

You're better off not even trying in SA. Its the law, and it sucks.

Edited by Bl4cK32
Link to comment
https://www.sau.com.au/forums/topic/163482-good-engineer/#findComment-3033768
Share on other sites

The only way I've found to get around emissions (well told by some one in vehicle standards) here in SA is to move to NSW. Get the car emissions tested and engineer signed off that it meets ADR's, get it all reg'd then move back here and transfer the rego.

Live 40km's away from the CBD so you are allowed to have a simple VIS check done by the local cop shop, be sure to bring all the associated documents from the modifications/engineer/emissions etc.

Live inside of the 40km's and you'll be off to regency for a vis + roadworth that often than not they pick up something.

Then the car will probably be defected and regency won't honor nsw's emissions testing engineering adr etc..

Who knows, they don't LMAO!

There is word that SA is in the process of sorting out emissions testing for petrol vehicles, I'm not going to hold my breath.

Link to comment
https://www.sau.com.au/forums/topic/163482-good-engineer/#findComment-3033772
Share on other sites

I havent done anythink yet but was planning on getting 20ich rims with coilovers and c/f bonnet, i wanted to do it the right way but now thinking i might just have to stick with 18's and risk the c/f bonnet. The reason i wanted to get engineered was that im spanding so much on this car and wanted to do it right.

ADELAIDE needs a mod plate

Link to comment
https://www.sau.com.au/forums/topic/163482-good-engineer/#findComment-3033791
Share on other sites

cf illegal due to the way it reacts during a crash. If u paint it u lose the wank factor of having one to start with. Its been covered here before.

Coilovers are illegal unless u weld them @ std height. No point having them as well, see SK's definition of why (unsuited to australian roads etc etc...)

Link to comment
https://www.sau.com.au/forums/topic/163482-good-engineer/#findComment-3033983
Share on other sites

I am an engineer and 95% of the posts in this thread are absolute crap............. You can do anything you want with a car as long as the maths supports your theory,............

Unfortunately it cost$$.. I will do some approvals for free, but extremem shiat will take some brain hurtin g...

Let me know if youj want the good oil... And dont just take what the RTA DMR QTA says is gospel............

ENgineering wasnt cool when we were 15, but its really cool when you running 400rwkw's and the boys cant touch you..

Insert evil laugh.....Muhamuhamuham

PM me for my number dude,... We are just about to import another car that is going to be insane HPO, and drivable...

S

Link to comment
https://www.sau.com.au/forums/topic/163482-good-engineer/#findComment-3035512
Share on other sites

I am an engineer and 95% of the posts in this thread are absolute crap............. You can do anything you want with a car as long as the maths supports your theory,............

Nice way to say hi :)

Can u then stand by your certificates saying that the police will not defect the car still, requiring a trip to regency to clear? Given the fact they only have to have a suspicion of a defect -without knowledge of the ADR laws that they are defecting for?

Are u saying that even though regency engineers can knock back certified safe cars that u will stand by your certifications, and take them to court to follow the matter up, even though they are expemt from any decisions made by them?

Please elaborate because i know a few hundered people here and on other foums would love to see you and your certs/plates get past the system that has raped many...

Link to comment
https://www.sau.com.au/forums/topic/163482-good-engineer/#findComment-3035793
Share on other sites

It either complies with state and federal legislation or it doesnt..

It is very black and white.... You will find it hard to find anyone that will write dodgy approvals..

But if it is a pass, it is a pass.. Simple..

U know that, we all know that. Explain why regency wont agree with it. Fact - people who have engineers certified mods on their cars in SA have been defected in the past.

Even if u have a mod plate and all mods comply regency can still refuse it on the road, which HAS happened.

Even if u STILL get it past them, there is nothing to stop police sending u back again.

Its all good to state it will pass if its legal, but we all know regency doesnt care, the police dont. It a revenue raising bitch, and u cant do shit except chase your tail.

Have a look at the law and theres a loop hole that states regency doesnt have to explain what they do. Dont make me dig it out. :P

Its all good to offer a cert plate, but in the end u will still end up back at regency.

So please offer an explanation as to why u think your certification would be different to anyone else, and if you would challenge regency as to why it was knocked back.

Link to comment
https://www.sau.com.au/forums/topic/163482-good-engineer/#findComment-3036552
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah, new members can't post pics until they reach a certain post count. If I get a chance I'll promote you to full member, if @Prank or someone else doesn't get there first.
    • Drilled the rubber out on a slow speed and it didn't catch much at all. Probably only half a dozen holes was enough to shred the rubber and it dropped off easily leaving the inner sleeve behind. Will tackle that later
    • I havent bought a manual cover for the dash yet and no cluster change, won't bother me too much, I just need to get that auto box gone, manual in! I miss my manual. 🤪. We started last weekend and managed to get the box out. Planning to start putting it in this weekend and then order a single piece tail. We were super careful to take time and not damage anything. It's my first time working under the car.  With my S15 mainly worked in the bay. This time, it was a headache because of three or four bolts only. They simply didnt want to leave thei homr and the one securing the tailshaft, another above the GB, and the one securing the lipstick was a shit. Mates mate, Davo caught fire 🤣, nearly opened his chest up with a grinder 🤦🏽‍♂️ and both mates nearly had a plate from the box land and slit their head open. Fun times. We all survived. Not the easiest working with limited access on jackstands. As I'm sure we can agree these are the memories which make us love our car. For all three of us, was an awesome weekend and Sunday 3.30am before tools down was a fantastic effort. I need to upload pics, but looks like it needs to be via Url now. We used to be able to just upload pics back in the day. It's been that long! 🤪 Im currently spraying rustoleum under body, not because it's rusted. It's super clean, but just so it's protected for the next 10 years. There was a few surface rust spots. Which pretty much wiped off with a 3M scourer.  Really impressed with how well the previous owner maintained it. Bank account went down so quick! Service, then GB - managed to get a spanking new 34 genuine box from Nissan. All the rest of the conversion parts from Kudos.  Went with a Nismo short shifter. New pedals and Exedy Clutch and FW. Ordered the Prp Rear Main Retainer kit which should arrive Friday and my first engine mod part just like I did with my S15 will be the Tomei Expreme Turbo Outlet. Already on order. It'll likely sleep next to me on a pillow during the coming months. 🥰 Last build was on my JET200GT profile and on SAU and Hardtuned I had documented the build. Planning to try to do that again. Brands feel scarce now. Wish we still had ARC and Apexi parts readily available. Exhaust - need some advice on this. I had an Apexi exhaust on the S15 and loved the tone. My mate had a HKS HP Silent on his 33 and suggested I go with that to avoid drone. I can't remember hearing an RB25DET running that so will likely need to wait for a meet or something to hear it.  Not after big power, just enjoy building it, and drivability with minimal negative attention.
    • Have a chat with Ben at Moore Performance or Jesse at JS Performance.
    • Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
×
×
  • Create New...