Jump to content
SAU Community

Recommended Posts

hey guys i own a nissan skyline 93 mod rb20

i went to start the car to leave work 2day and it would not start for some reason

we thought it was the battery so we tryed jump starting it and even swappin over

batteries but still no go.

RACV came out and had a look and at first they thought it was a dead fuel pump.

But after taking off the fuel lines and testing it fuel seemed to be pissing out when

trying to start the car so he now thinks that its got something to do with the electrical

connections. Ignition module maybe.

has any1 expeirenced this or know anything of it help would be appreciated as the

car has been towed back to my house.

cheers adrian ......

Link to comment
https://www.sau.com.au/forums/topic/169096-car-wont-start/
Share on other sites

was the car kicking over??? or just nothing?? or does it start then die??

i would check simple things like the ground on the ignitor may have come loose, cooler piping may have come loose,

when i crank it it starts clickin n sometimes it will start then die off 2 secs later or it will

just click and not even start at all.

the 2 main connections on the ignition module seem to be rather clean so im wondering

if its the actual pack itself (module)

Link to comment
https://www.sau.com.au/forums/topic/169096-car-wont-start/#findComment-3125652
Share on other sites

Well there's some spark to start it but not enough to keep it going, so I would say it would be the ignition module. If it was the coil packs one starts firing abnormally first which causes backfiring etc. but is not enough to keep completely stall the engine as you've mentioned.

Has it been raining down Vic way, because wet weather usually shows all the electrical weaknesses in a car.

Link to comment
https://www.sau.com.au/forums/topic/169096-car-wont-start/#findComment-3125675
Share on other sites

No, series 1 and series 1 only, no go for rb20 or 26 igniter either. Your best bet would be if you've got a mate with another s1 r33 just swap his igniter over to yours, a) if it fixes the stalling you'll know it's the igniter b) if it's still up to shit, the next most likely thing at fault would be CAS.

A genuine igniter is around the $700 mark new, if you keep an eye on the trader section you may find a second hand one but be wary it'll probably be stuffed too lol. not many other reasons why someone would take their igniter off unless it was playing up or you they were planning to make big power.

Link to comment
https://www.sau.com.au/forums/topic/169096-car-wont-start/#findComment-3126033
Share on other sites

guys

the car is at the mechanics now and everything seemed fine until they checked the safc

and ecu connections

the safc has been installed wrong and that it mustve burnt out a connection.

they disconected the safc and it got started but something is trigging it off. (damaged

safc,ECU,etc)

Im hoping that whatever has happend hasnt affected the ecu because im not really up

for a new one. There going to run more tests on it on monday and tell me the whole story.

cheers. adrian

Link to comment
https://www.sau.com.au/forums/topic/169096-car-wont-start/#findComment-3128065
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...