Jump to content
SAU Community

Hesitation When Cold

munro'sgts-t
 Share

Recommended Posts

munro'sgts-t Collaborator

munro'sgts-t

Posted
Posted

ok so storie goes s1 r33 skyline normal mods fmic exhaust/dump boost at 12psi tuned apexi safc about it i think. anyways just laty it has started to hesitate and miss when just slowly exelerating while cold like when you come onto about 2000 - 3000 rpm ny wear arround there it will just stop exelerating and start to studder and as soon as you back off or change gears its fine once its warmed up its fine. also the occasionly it fluctuates at idle like say from 1000rpm to 400ish the other day it got so low it stalled just sitting in neutral in my drive way and it was warm at thats stage. usually only does this while cold. any one know how to fix this problem i dnt think its a boost leak beacause its still fine while warm and giving it a good hard drive.

Link to comment
https://www.sau.com.au/forums/topic/174885-hesitation-when-cold/
Share on other sites
munro'sgts-t Collaborator

munro'sgts-t

Posted
  • Author
Posted

ok so i still have this problem its studering when cold at 200rpm and when its warm and you get into it at 3000 ish it has a bit of a dip or pause in revs just stay there for a second then they keep going. also whilst going up a hill at 60 kph in 4th it will start to studder but the revs will not noticebly move, i will clean the afm tomorrow but i dnt thik its going to make any different has any one got any ideas, ???? its not the turbo on the way out is it.??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...