Jump to content
SAU Community

Recommended Posts

Hi guys, Im selling my Digital Video Recorder Kit its Brand New!

Was Going To Use It At My Fiance's Place After Her Car Was Damaged But In The End Just Scrapped The Idea And Put In a Different System.

This DVR KIT is great for your home/business or to put in your garage like i was going to do i paid $3000 for it just 3 weeks ago.

Here's the features: MJPEG Compression

USB / Internet Backup

Wall bracket included

4 Channel CCTV Camera DVR

Inbuilt 15" TFT-LCD Monitor

Full Triplex Operation

PTZ RS-485 Camera control

RJ45 Ethernet IP Adressable

DDNS with password protection

Full web browser view/control

4 Input / 1 Output alarm trigger

BNC Monitor output Local Composite

BNC SPOT Monitor output (No menu)

BNC Camera Inputs x4 PAL/NTSC

12Vdc 1.5A Power-Pack Included

25 frames per second recording x4

Quad and full screen view/rec.

Motion detection software with

Programable area & sensitivity

Schedule recording menu setup

1x IDE PATA Hard-Drive 320gig

Mini Dome Camera Features: 1/3 Color camera, 420TVL, 0.5Lu /F2.0.

Built in 3,6mm wide angle lens.

Advanced Turbo-OE Technology.

This is a complete kit all you have to do is put it where you want and wire it up!!

1 x 4ch AIO400 DVR, 320 GB Video HDD

4 x Mini Domes

1 x Power Supply (camera’s)

1 x 100 Meters RG59 Combo cable

im asking $2500 this is cheap for what your getting! Marc 0424 686 511, Revesby 2212 [email protected]

post-14057-1184113398_thumb.jpg

post-14057-1184113411.jpg

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...