Jump to content
SAU Community

Recommended Posts

Used in perfect condition Microtech Efi LT 12s RRP $1495

(Top of the range with all features)

For Nissan Skyline R33 S2 Gts-t

With Plug & Play adaptor RRP $350

(No wires need to be cut to install this ecu)

Software & Dongle & Cable RRP $155

(software needs to be run on a laptop - I used a dell with Win XP)

Full RRP $2000 so pick your self up a bargain at my expense

http://www.microtech-efi.com/index-2.html

This ECU has been tuned using the matrix mode for fuel economy and power all on the one tune.

I used to get up to 550km / tank on the freeway and about 400 around town if I drove nicely, however with the 255l/hr fuel pump, 1:1.7 malpassi fuel regulator and 17 psi putting out 250kw@rw it could use the fuel up in about 250km when I wanted some excitement. Unfortunately that was quite often.

If you have same specs straight up as mine your tune should be pretty close, but please check your a/f ratios on a dyno before using it.

My engine/power mods were:

Stock Engine Internals

Apexi High Flow Air Filter

GReddy Profec B Spec 2 Boost Controller

(Shouldnt matter which one your using)

Split Fire Coils (blue) (I still have these for sale if anyone is interested email me & I can list them for you)

These were great as they allowed a much larger spark plug gap which increased lots of high RPM power for my car.

NGK Irridium IX spark plugs with 0.8mm gap

(Could only get a 0.6mm gap before using Split Fire Coils before getting spark blow out from high boost)

Boche 255 L/hr Fuel Pump

Malpassi 1:1.7 Fuel Regulater at 40psi at idle (I think- it was on the gauge)

Apexi Turbo Timer (Includes a useful A/F ratio meter good for tuning your fuel economy to 13.5-14.8 : 1. Don't tune for full throttle on these as they are not as accurate up high)

Hybrid Tube & Fin - Front mount Inter cooler

GFB Hybrid BOV

Greddy Oil Catch Can

3" Mandrel Bent Stainless Steel Exhaust - Turbo Back with high flow cat.

And a High Flowed with steel wheels - T03/04 from an R34 after I blew my stop plastic/ceramic one at only 12 psi.

ASKING $1600 LIVE ON THE GOLD COAST DAN - 0423344478

Edited by ragex
Link to comment
https://www.sau.com.au/forums/topic/182651-fs-microtech-lt12/
Share on other sites

  • 2 years later...
Used in perfect condition Microtech Efi LT 12s RRP $1495

(Top of the range with all features)

For Nissan Skyline R33 S2 Gts-t

With Plug & Play adaptor RRP $350

(No wires need to be cut to install this ecu)

Software & Dongle & Cable RRP $155

(software needs to be run on a laptop - I used a dell with Win XP)

Full RRP $2000 so pick your self up a bargain at my expense

http://www.microtech-efi.com/index-2.html

This ECU has been tuned using the matrix mode for fuel economy and power all on the one tune.

I used to get up to 550km / tank on the freeway and about 400 around town if I drove nicely, however with the 255l/hr fuel pump, 1:1.7 malpassi fuel regulator and 17 psi putting out 250kw@rw it could use the fuel up in about 250km when I wanted some excitement. Unfortunately that was quite often.

If you have same specs straight up as mine your tune should be pretty close, but please check your a/f ratios on a dyno before using it.

My engine/power mods were:

Stock Engine Internals

Apexi High Flow Air Filter

GReddy Profec B Spec 2 Boost Controller

(Shouldnt matter which one your using)

Split Fire Coils (blue) (I still have these for sale if anyone is interested email me & I can list them for you)

These were great as they allowed a much larger spark plug gap which increased lots of high RPM power for my car.

NGK Irridium IX spark plugs with 0.8mm gap

(Could only get a 0.6mm gap before using Split Fire Coils before getting spark blow out from high boost)

Boche 255 L/hr Fuel Pump

Malpassi 1:1.7 Fuel Regulater at 40psi at idle (I think- it was on the gauge)

Apexi Turbo Timer (Includes a useful A/F ratio meter good for tuning your fuel economy to 13.5-14.8 : 1. Don't tune for full throttle on these as they are not as accurate up high)

Hybrid Tube & Fin - Front mount Inter cooler

GFB Hybrid BOV

Greddy Oil Catch Can

3" Mandrel Bent Stainless Steel Exhaust - Turbo Back with high flow cat.

And a High Flowed with steel wheels - T03/04 from an R34 after I blew my stop plastic/ceramic one at only 12 psi.

ASKING $1600 LIVE ON THE GOLD COAST DAN - 0423344478

Cheap

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • If there's oil in with the clutch, I hope it finds its way out even if that hole has a cover/grommet 😛 I don't want oil near my cars clutch! 😛 Interested to hear the answer about covering it, I'm assuming a bung for a gearbox from another car that has a grommet to suit.
×
×
  • Create New...