Jump to content
SAU Community

Nsw 7/9/07 Drift Practice At Oran Park - Initial Drift Australia

Bakadesu!!!

By Bakadesu!!!,
in Events Archive

 Share

Recommended Posts

Bakadesu!!! Apprentice

Bakadesu!!!

Posted
Posted (edited)

D-Day Practice, Oran Park North Circuit - 7th September 2007

APEC-X DRIFT DAY!

While a whole bunch of world leaders are having a chinwag in the Sydney CBD at the Apec meetings, and protesters are causing havok out on the street, we'll be out causing mayhem at Oran Park instead.

It's a public holiday for most people in the Sydney area, so make it a good start to the long weekend.

This event will be a drift day on the North Circuit (Driftland) at Oran Park. Two different layouts will be run to cater to all skill levels.

  • YOUR CAR WILL NEED TO PASS SCRUTINEERING - Working seatbelts or valid harnesses, properly installed seats, working brakes and brakelights, working windscreen wipers if it rains, all wheelnuts present and no leaks are the basics. Convertibles will not be allowed unless they have a rollcage that extends above the driver's head. Any questions, please ask.
  • YOU WILL NEED AN AS1698 (that little red and silver sticker) APPROVED HELMET, LONG SLEEVES, PANTS AND CLOSED SHOES
  • A free sausage sizzle and drink will be provided for all drivers who enter. That doesn't include extra ones for your mates or girlfriend!

FREQUENTLY ASKED QUESTIONS: --> Click here to read info about how our days work, scrutineering requirements etc.

PRICES:

Initial Drift Club Member: $130

Non-member: $160

Yearly Initial Drift Membership: $170 for the first year. Includes t-shirt, stickers, membership card and discounts on track day prices and free gate entry to most events. Available on the day. Get this if you intend to do a lot of track days. Renewal is $120 per year.

Yearly Associate Membership: $50 per year. Gives you membership in a CAMS affiliated club and the ability to hold a CAMS L2NS licence, which is required for most of our events. No other benefits. Available on the day. Get this if you only intend to do a few days. You can upgrade at any time to a full membership

CAMS L2NS licence: $48 Available on the day. Payable on the day.

NOTE: The CAMS licence is a once-yearly payment. After applying for one, you will eventually receive a licence in the mail that can be used at all of our events for one year. If you signed up for one last time and have not yet received it, please bring the tear-off bit you received.

Here's how to work out how much it costs for you:

If you're an Initial Drift member with a CAMS licence, it's $130

If you're not an Initial Drift member, but have a CAMS licence, it's $160

If you're an Initial Drift Associate Member with a CAMS licence, it's $160

If you want to join with a yearly Associate Membership it's $160 + $50 +$48 = $258

If you want to join with a yearly Full Membership, it's $130 + $170 +$48 = $348

TIMES:

SIGN ON: 8:00AM - 9:15AM

SCRUTINEERING: 8:00AM - 9:15AM

COMPULSORY DRIVER BRIEFING: 9:15AM - 9:30AM

TRACK ACTIVITY: 9:30AM - 4:30PM

LUNCH BREAK: 12:30PM - 1:00PM

HOW TO ENTER:

  • Download the ENTRY FORM <-- Click Link To Open. (Not working? Download the latest Adobe Reader HERE)
  • Read it and fill it out.
  • Scroll down to the bottom and click the button to email the form to us.
  • Deposit your money into the bank account on the entry form (by direct deposit either on the internet or at your bank), and make sure you put the remitter name as your name, and put DRIFTLAND or something similar as the description. This will secure your spot. All you have to do then is turn up.

PRE-ENTRIES WILL NOT BE ACCEPTED AFTER THURSDAY THE 6TH EVENING, AS THE PAYMENT SOMETIMES NEEDS 24 HOURS TO CLEAR BEFORE YOU SECURE A PLACE.

Entries can be made on the morning, but prepayments are preferred.

Due to the extra administration required, drivers who do not prepay will no longer be refunded gate entry. If you prepay, your name will go on the gate list for free entry, or if you're a member, entry is free if you show your membership card.

- Alexi, Pete & James

Edited by Bakadesu!!!
 Share
Go to topic listing


  • Latest Posts

    • ToothDR32
      $5 Clock upgrade for R32 GTR

      By ToothDR32 · Posted

      Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
×
×
  • Create New...