Jump to content
SAU Community

Chasing R33 Gtst Drivers Side Window Motor

phee

By phee,
in Classifieds

 Share

Recommended Posts

phee Experienced

phee

Posted
Posted

Guys / Girls,

I am preping my car to sell so I am fixing all the misc items that I couldn't be bothered fixing before now, so does anyone have an R33 drivers side window motor that I could take off your hands? Please let me know, if reasonable I'll pay postage as it will still probaby work out cheaper than getting one from Nissan.

Thanks :ninja:

Phee

_MRR33 Experienced

_MRR33

Posted
Posted

Have you tried Import Wrecking Yards? Try the yellow pages there's some in there ...JustJap is another one that can get there hands on one.

They're around th $100 mark.

phee Experienced

phee

Posted
  • Author
Posted

No I live in a mining town in the middle of bum-f**k-idee-hoe so it's really hard trying to get this gear out here without being ripped off.

I'll try JustJap and see what they have to say, thanks for the tip.

Mud Grand Master

Mud

Posted
Posted

Are you certain its the motor?

There are three things that can stop the window working.

1. Switch

2. Relay

3. Motor

there are 3 different types of relay also for Series 1, 1.5 and 2.

I thought the swicthes or the motor was stuffed in mine, after a lot of swapping parts and testing, it turned out to be the relay.

I would suggest swapping some bits to diagnose the fault before buying bits.

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • EndZee
      R33 Gts/-t Abs Module Wiring Schematic (not Gt-r)

      By EndZee · Posted

      Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...