Jump to content
SAU Community

Recommended Posts

Hey guys, I need to get these things outta my backyard, I've got a few more things coming which are listed at the bottom.

-R33 Interior + other screws bolts etc.

DSC07281.jpg

DSC07282.jpg

DSC07283.jpg

DSC07284.jpg

DSC07285.jpg

DSC07286.jpg

Wiring looms: This does have a rb25det wiring loom, but it has been cut in some places, most of it is still usable and luckily there are connections all over the place so you can replace the area that you may need.

DSC07279.jpg

-Pod filters $20 each

IMG_4534.jpg

-r32 Autospoiler + motors $150

R32GTRfrontautospoilermotors.jpg

-r33 Series 1 front grill $50 SOLD

-r33 Series 2 front grill $50 SOLD

-r33 Front bar $400

R33frontbumper1.jpg

-r33 LHS front fender $50 - slight rust under guard (ask for pics)

frontLHSfender.jpg

-r33 sedan (4 door) doors (all but RHS rear) $200

frontdoorRHS1.jpg

-r33 gtst front rotors + calipers $400 they are 28.8mm thick (brand new rotors are 30mm thick)

IMG_5633.jpg

-r33 LHS and RHS power mirrors $50 each

MirrorRHS.jpg

-s14 silvia RHS door trim parts $20

S14Silvia200sxRHFdoorparts.jpg

-s14 silvia RHS door wiring loom $10

I also have a list of all the cables I have such as boot / gear / handbrake / clutch etc... so here it is: (I've put the skyline stuff on top as that is probably mostly what it sought after here)

r33 skyline Accelerator cable x 3

r33 skyline bonnet cable x 2 (both damaged at the latch end I believe)

r33 hand brake cable (2 LHR and 3 RHR)

r33 aerial cable

and

r32 handbrake RHR

I've got more s13, s14, z31, z32, n13, n14 cables but they are probably not all relevant, just PM me if you want more details on em.

I live at Wantirna South, give me a Pm or contact me on 0430533811

I'm also selling some engines + gearboxes http://www.skylinesaustralia.com/forums/t187775.html&hl=vic+rb25det.

I am yet to list some other things I have, such as r33 interior, s13 interior and like 30 door trims lol. I've also got some sideskirts for a 180sx, I think I've only got 1 side skirt for a r33, I'll post them up later on. I have some accelerator cables and boot cables for a few imports, I'll post them up too soon.

Edited by Danzzigger
Link to comment
https://www.sau.com.au/forums/topic/190281-danzs-stuff/
Share on other sites

I'm pretty sure I have a RHS window switch for the 4dr, luckily it came with all the trims I bought. As for the pic on the LHS mirror, all the pics are located here: http://s17.photobucket.com/albums/b66/Danzzigger/Selling/

Link to comment
https://www.sau.com.au/forums/topic/190281-danzs-stuff/#findComment-3427550
Share on other sites

I'm pretty sure I have a RHS window switch for the 4dr, luckily it came with all the trims I bought. As for the pic on the LHS mirror, all the pics are located here: http://s17.photobucket.com/albums/b66/Danzzigger/Selling/

Site has password... how much for the swutch plate...

Link to comment
https://www.sau.com.au/forums/topic/190281-danzs-stuff/#findComment-3430293
Share on other sites

Does that include the black panel on top???

black panel on top? you mean the whole switch system on the drivers side? yeah it includes all of it, not just the buttons underneath. If you want I've got some door trims aswell incase you ever want to try and make a custom door trim or something :). Like I said, i have all of them cept the rear right.

Link to comment
https://www.sau.com.au/forums/topic/190281-danzs-stuff/#findComment-3434686
Share on other sites

The front bumper comes with the mesh and everything already on it, and is done with very good quality. I've got no idea what the front bumper is as I've tried to find it but had no luck.... perhaps its custom, I have no idea.... but for 400 bucks its a bargain.

Edited by Danzzigger
Link to comment
https://www.sau.com.au/forums/topic/190281-danzs-stuff/#findComment-3434690
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...