Jump to content
SAU Community

Recommended Posts

Wanting to get rid of the stock rear speakers in the r34 skyline. I have a set of 6x9's from my previous car that i want to replace the rear speakers with.

Anyone know if this is hard to achieve?

(know very little about car audio im afraid!)

Link to comment
https://www.sau.com.au/forums/topic/193594-6x9s/
Share on other sites

dude seriously I have been playin with car audio for maybe 12 or 13 yrs and to be honest I have never liked the sound from 6x9's. I am sure that there are some that sound good but if it were up to me I would be picking a pair of 6 inch splits every time. If you need more bass then add a 10 or 12 inch sub.The bass from 6x9's is never as good.It really depends on how much you want to spend.With the car you got I would go the best myself...I used Boston Accoustics and I swear by them..Precision power amps are so clean also...I got one for sale on Ebay at the moment but maybe too big for what you need.....cheers

Link to comment
https://www.sau.com.au/forums/topic/193594-6x9s/#findComment-3473638
Share on other sites

I have a 12" rockford sub from my old car sittin in my room (no amp tho) but im not sure if i wanna take the sub route?

The 6x9's i already have as well from way back (they are not too bad) and i just wanted to put them in for the mean time...anything beats the stock speakers i reckon.

Link to comment
https://www.sau.com.au/forums/topic/193594-6x9s/#findComment-3473793
Share on other sites

dude seriously I have been playin with car audio for maybe 12 or 13 yrs and to be honest I have never liked the sound from 6x9's. I am sure that there are some that sound good but if it were up to me I would be picking a pair of 6 inch splits every time. If you need more bass then add a 10 or 12 inch sub.The bass from 6x9's is never as good.It really depends on how much you want to spend.With the car you got I would go the best myself...I used Boston Accoustics and I swear by them..Precision power amps are so clean also...I got one for sale on Ebay at the moment but maybe too big for what you need.....cheers

so true, 6X9's are so overrated. and your need to spend a bit of money/time installing them to make them look good on the back parcel shelf, better of putting 6inch splits which will fit perfectly into the standard holes and will look and sound awesome

Link to comment
https://www.sau.com.au/forums/topic/193594-6x9s/#findComment-3482238
Share on other sites

6x9s won't get the power at real low frequencies a sub will hit but often because they're multi-voice they make a good midrange speaker.

First thing I think of people dodging 6x9s and going straight for 6"s and a sub is the asshole retarded salespeople in your common car audio stores. They get paid by commission you tools, of course they want to have you go the 6" + sub + amp route.

Like I said, 6x9s, not a replacement for a sub, but in my case better then what came with the car (nothing). Currently have two voice alpine 6" in my doors and a couple of pioneer 3 voice 6x9s on the shelf. A sub is on my list to do as there is a lack of power in the real low end, and probably a couple of tweeters for the real high end, but the 6x9s put out enough to make the rear window shake, and have a very nice spread of frequency response.

Fiddle with the headunit a bit and try and tune it to be even. Unless your music is actually heavy on the bass, you shouldn't tune it so it sounds like it. I know it tends to lean more towards the sound engineer idea but if you have a friend that has some studio monitors, go play a music track on them, listen for the way the sound responds in both low and high frequencies, then play the same music in your car and try and get it to sound similar to that to start with. After you've got this base point, make small tweaks to it as your personal preference, but try not to tune too far away from the base point.

Anyway, hope this helps. (Btw, 6x9s will fit in a R33 with MDF spacer quite easily, and if angled right, you can secure them using some of the stock holes. Your spacer only needs to be high enough to lift up the majority of the cone, the driver should still fit through the original hole.)

Edited by Hell Fire
Link to comment
https://www.sau.com.au/forums/topic/193594-6x9s/#findComment-3482679
Share on other sites

Hey thanks for all the responses thus far.

I guess i was going for the 6x9's as i already have them and they are quite decent quality. I also thought they would fit with no major problems or hassels.

I might just pick up a set of 6" splits for the back as apparently they will fit right in? I'll hold out for a few months untill i find a good amp and possibly new head unit.

so does anyone recommend any GOOD 6"(split) speakers that aren't overly expensive?

Link to comment
https://www.sau.com.au/forums/topic/193594-6x9s/#findComment-3483410
Share on other sites

Dont install 6x9's if your going to have a sub..

6x9's are designed to give you a little "punch" of bass.

If your putting in a sub.. this extra little bit of bass become irrelavent because you have a sub.

6x9's distort easier than 6" and 6" have much better sound quality.. AND you dont have to go through the effort of making 6x9's

thats my 2c

Link to comment
https://www.sau.com.au/forums/topic/193594-6x9s/#findComment-3483498
Share on other sites

Yer my intention was never to have a sub and 6x9's at the same time. I was going to put the 6x9's in cos like i said i already have them and i thought it would be a simple swap for the old speakers. I didnt want to go down the sub route at all...

however, now i will just probably sell my 6x9s and buy some 6" for the back as they will fit in with no hassels, will apparently give better sound and they look better :no:

Link to comment
https://www.sau.com.au/forums/topic/193594-6x9s/#findComment-3484476
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
    • OK, so a bunch of trim needs to come off to get to the rear shock top mounts. Once the seat is out of the way, the plastic trim needs to come off. Remove 2 clips at the top then slide the trim towards the centre of the car to clear the lower clip Next you need to be able to lift the parcel shelf, which means you need to remove the mid dark trim around the door, and then the upper light trim above the parcel shelf. The mid trim has a clip in the middle to remove first, then lift the lowest trim off the top of the mid trim (unclips). At the top there is a hidden clip on the inner side to release first by pulling inwards, then the main clip releases by pulling the top towards the front of the car. The door seal comes off with the trim, just put them aside. The the lighter upper trim, this is easy to break to top clips so take it carefully. There is a hidden clip towards the bottom and another in the middle to release first by pulling inwards. Once they are out, there are 3 clips along the rear windscreen side of the panel that are hard to get under. This is what the rear of the panel looks like to assist:
×
×
  • Create New...