Jump to content
SAU Community

Recommended Posts

Hi guys,

new to this forum, I'm thinking of buying my first sports car in the next 3 months

I was thinking of choosing between a Mazda rx8 or v35 coupe...350z was out of equation due to it being a bit more expensive and onl being a 2 seater, what do u guys think?

I love the look of both, but it took me a while to get used to the v35 look, but now I really like it.

My budget is low 30's and unfortunately all the cheaper v35's dont come with leather.

I had my eyes on this one:

http://www.carsales.com.au/used-cars/priva...amp;Make=NISSAN

How much would it cost to install after market leather on the v35 coupe ne ideas? and is it worth it? the standard interior looks kinda cheap without the leather IMO

Edited by danny_tq
Link to comment
https://www.sau.com.au/forums/topic/199236-rx8-v35-leather-trim/
Share on other sites

I thought you'll need to budget around mid 40ks for a nice RX8 with leather trim, $30k-ish would probably get you an early release of RX8 with not much options on it. My bro had an Revolution version RX8 and it cost him like $64k 2 years ago.

If you can buy RX8 with leather, then the comparison would be 350Z, but a late model V35 would be about high $30k to mid $40k depending on km and transmission & trim level (e.g premium or non premium, auto or 6sp manual). low $30k is easy to get for a 4 door sedan. But if you wanted a coupe, even in auto you'd be searching for quite some time to get the early 2003 model.

I'm a bit sceptical with aftermaket leather as you'll either have mis-matched door trim or you'll have to go all the way with door trim, rear seat etc, and fake leather I heard could cost about $3k-$5k installed depending on qualty and real leather would be $7k-10k so dunno if you wanna spend $30k on a non premium V35 and spend another $7k on a non factory leather, you'll probably be better of save up and budget around $35-38k to get a nice auto with premium nd leather pack incl on road costs...

Also I had a look at the link you showed me. Nice looking car, but most likely a non-premium model (no leather).

Bear in mind that if you buy a premium model in the 1st place they come with suede/leather interior and a lot will come with Bose stereo that sounds much better than the stock form. Remember that V35 has an integrated factory dashboard so putting an aftermarket sound system would be almost impossible, so it's worth to go with a better stereo that you can live without installing any aftermarket amps or subwoofer (if you're not a die-hard audiophile).

03 Rx8's have had a few recalls so make sure they have had them changed prior to buying. underpowered and fuel guzzlers.

the link you sent- that car has been sold a long time ago- but those dam importers leave it there to create interest only. O yeah Rx 8 leather is really plastic like.

My personal experience with those importers I dont find anything sincere or genuine about them. I found their cars to be rough aswell. You will know what I mean when the time comes.

Dont forget your up for approx 4K for transfer fees/ duty 3%/ and insurance.

Edited by G7

That reminds me when I was trying to find a replacement for my old '93 R33 auto (wanted a manual), went around looking for a locally landed R33 manual and despite all the bell and whistles and bling on the web advertisement, when I see the car in flesh 99% of them are in pretty much in poor sorry condition. That was about 4 years ago, but I think it's still the same case now, although if you plan to buy a 2-3 yr old vehicle there's a chance the condition will be better than a 10 yr old car.

oh yeah and as G7 mentioned don't forget insurance. I'm 35yo Rating 1 for 3 years, excellent driving history, and quoted by Justcar with a value of $35k = $1070 a year in a high risk melb suburb. Best quote is from Dawes $1067 but I'm not sure how good they are as I've never heard Dawes insurance personally. If you're much younger than me and has less than excellent driving/insurance history, expect that quote to grow to up about $2k on average that I've seen people been quoted, more if you're in Sydney. That's a lot of money to pay every year, but as you own an import you'd better get yourself insured because parts and repair can be very expensive if something happens *touch wood*.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pressure when IDLING, is meant to be 51PSi... So that amperage value needs to go up a fair chunk... I'd personally be factoring for more like 12amp at least on those runs, and at that point you need to hope the already there wiring doesn't drop you a volt or two, as that's a lot of fuel pressure flow drop off from 13.5 to 12V! Taking idle pressure of 51psi, means the pump will be drawing a MINIMUM of 9amps all the time based on your reading of the graph (3bar base, then allowing an extra 0.5bar for boost = roughly 51psi)
    • Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
×
×
  • Create New...