Jump to content
SAU Community

Recommended Posts

long story short i'm in need of 1 driftek gold rim, 17x8 +34

first of all the guy at the place i was going to get it through tried to tell me that koya or whatever can't match exactly the same colour gold..... come the f**k on they come in 2 colours the gold that everyone has and black

and i have 10 holes in them, 5 where the studs go and 1 in between for decoration making 10, reckons he can only get them with 9 (multistud?)

i think he's just trying to get a full set of rims out of me

can someone just confirm the facts for me about these rims regarding the stud holes mainly i read on ns in a thread that 9 holes only came on black drifteks, the colour bullshit he tried to feed me i don't believe for 1 second

Edited by mystery_kid
Link to comment
https://www.sau.com.au/forums/topic/201687-koya-drifteks/
Share on other sites

Hey mate, teh reason you have 10 holes is for different cars with a different PCD.

Can't remember exact specs but there are two different PCD's in 5 stud.

And i've never heard of a car coming with 9 holes?

The holes would overlap each other and make them unusable.

In multistud it's either 10 (5 stud) or 8 (4 stud rims).

Anyway hope you find what you need bud.

Link to comment
https://www.sau.com.au/forums/topic/201687-koya-drifteks/#findComment-3586031
Share on other sites

yeah i've got the low down, basically koya are dodgey as and change coolours and designs like their underwear

i ended up putting the rim in for repair because no one could guarentee me a rim that would be exactly the same

steer clear of this cheap shit.

Link to comment
https://www.sau.com.au/forums/topic/201687-koya-drifteks/#findComment-3587090
Share on other sites

Hey mate, teh reason you have 10 holes is for different cars with a different PCD.

Can't remember exact specs but there are two different PCD's in 5 stud.

And i've never heard of a car coming with 9 holes?

The holes would overlap each other and make them unusable.

In multistud it's either 10 (5 stud) or 8 (4 stud rims).

Anyway hope you find what you need bud.

sorry to burst your bubble dude, but there are some rims which are multi stud (i.e. 9) these are normally made for 114.3 pcd cars 4 stud and 5 stud a good example of these are the veilside andrew rims which are fkn wide as they came with the multi stud pattern also i had a set of 17x9 rays rims which were multi stud (5 and 4) [its rare but there are some rims like this]

Link to comment
https://www.sau.com.au/forums/topic/201687-koya-drifteks/#findComment-3588360
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...