Jump to content
SAU Community

S13 - R32 - Cefiro R200 Nismo Gt 2 Way Mechanical Lsd Diff In Housing!

nigelswazi
 Share

Recommended Posts

nigelswazi Mentor

nigelswazi

Posted
Posted (edited)

Don't miss out on this top diff! Selling a R200 Nismo GT 2 Way Mechanical LSD diff complete in housing to suit S13's, R32's, Cefiro's etc! Complete with 4.1 Ratio and five bolt shafts (shafts are only a circlip fitting easy to swap with your 6 bolt shafts two minute job)! These are one of the best LSD centres around perfect for the street or track. All ready to bolt straight in comes with oil. Get out there and spin two wheels today!

Price - $850 This week just $750

Contact - PM or SMS 0404998591

Location - Adelaide but will ship at your expense around $75 with busfreight more for courier

Pics

nismomb0.th.jpg

nismocloseupom4.th.jpg

Edited by nigelswazi
  • 4 weeks later...
gt-t_r34 Mentor

gt-t_r34

Posted
Posted

is it possible to get just the center not the hole diff housing? i have a new viscous abs housing i just want a mechanical lsd in it but its hard to find an abs model diff with mech center in it..

thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • nouveau_poor
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By nouveau_poor · Posted

      Absolutely could be. I collected data logs from when the O2 sensor was still out and also after I had replaced it so will try to compare them. Pretty confident that the affect is lowered with the new sensor, will check logs at the same RPMs/conditions. 
    • Bennym35
      New guy

      By Bennym35 · Posted

      Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • Songo
      New kid on the block

      By Songo · Posted

      thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
×
×
  • Create New...