Jump to content
SAU Community

R34 Gtr Headlight Problem

edspaged2

By edspaged2,
in General Maintenance

 Share

Recommended Posts

edspaged2 Rising Star

edspaged2

Posted
Posted

G'day people.

I'm having a problem with my low beam headlight on my 34 gtr. It started when the headlight would sometimes not turn on but a few flicks of the switch would turn it on. I got a new globe for it but that wasnt the problem. I've checked all the earthing and they are all tight and connected. I'm thinking it might be the silver box under the headlight which powers the xenons. its becoming more hard for the light to turn on now. has anyone had any problems like this and if they have would anyone know where to get a replacement secondhand unit or how much it would be brand new from nissan?

cheers people

Link to comment
https://www.sau.com.au/forums/topic/205023-r34-gtr-headlight-problem/
Share on other sites
PHILR34GTT Newbie

PHILR34GTT

Posted
Posted

When i dip from high to low beam driver side xenon low beam goes off. Have to turn my lights off for a second and back on, it flickers but comes back on so any info regarding these problems aprecieted (Tired of pulling in to turn on and off my lights)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • svenskalice
      Kaizo Industries

      By svenskalice · Posted

      Oh, also, forgot to add these photos I believe.
    • svenskalice
      Kaizo Industries

      By svenskalice · Posted

      Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • GTSBoy
      RB26DETT Sketchy boost mod?

      By GTSBoy · Posted

      There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...