Jump to content
SAU Community

Recommended Posts

Hey im starting to looks for rims for my black r33 s2 NA (4stud)

and went into Dande TTF the tyre factory

Found nice set of rims.

they are Lenso RS-5 black in 18's.

does anyone have these rims or have any pictures of these rims fitted on a car prefferably a skyline :thumbsup: so i get a rough idea of what it will look like.

thanks

Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/
Share on other sites

If the link posted are the same wheels as you're going for/getting, they're gonna look shit (fitment wise). They're only 7" wide with an offset of +42 (higher than standard).

Fail from me. :D

Edit: Sorry for my comment, you didn't ask for opinions. :D:)

Edited by adam-__-
Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3773880
Share on other sites

Guys, he doesnt say anything about sizes, just what the style he is looking for. I found that photo and put it up there, so they may not be the sizes he is looking for. Look at the wheel style rather than the wheel size and go from there.

From my experience, those brand of wheels won't offer much wider wheels or lower offsets anyway.

Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3774135
Share on other sites

Well, I think thats the information he is after. He said he's getting 18's though. Do you know what sizes they do come in? May as well give the guy a hand while we're here!! Btw, dont ask me. I'm shit with the whole offset thing!

They only come in 17 x 7.0 and 18 x 7.5 from what I can see and I highly doubt they come in any other offset.

Edit: They come in 19 x 8.0 as well. No offset was mentioned for any width.

Edited by adam-__-
Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3774166
Share on other sites

  • 3 weeks later...

thanks for all the info guys and yea opinions welcomed good or bad....im looking for this style in four stud ...i dont know anything about offset so i was just hoping these would sit nicely??

i am 100% on getting 18inch just hard to come by in black four stud.

post-38129-1208782347_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3812850
Share on other sites

thanks for all the info guys and yea opinions welcomed good or bad....im looking for this style in four stud ...i dont know anything about offset so i was just hoping these would sit nicely??

i am 100% on getting 18inch just hard to come by in black four stud.

How they'll look when fitted will depend A LOT on what the offsets are.

You're after 18" so they'll be 7.5" wide (not wide at all).

Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3813508
Share on other sites

ok my mum rang up few shops to get quotes and she got told that putting the Lenso rs5 on my 33 n/a would be illegal due to the offset????? and if in a collision insurance wouldnt cover me.

its annoying the hell out of me trying to find decent 4four stud black rims...i found some finally and they wont fit properly due to offset :P

anyway we got reccomended to go to Motorsport wheels and tyres or something in dandenong so might have a look there.

Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3821035
Share on other sites

ok my mum rang up few shops to get quotes and she got told that putting the Lenso rs5 on my 33 n/a would be illegal due to the offset????? and if in a collision insurance wouldnt cover me.

its annoying the hell out of me trying to find decent 4four stud black rims...i found some finally and they wont fit properly due to offset :D

anyway we got reccomended to go to Motorsport wheels and tyres or something in dandenong so might have a look there.

That offset/track or wheel modification rule is farkin stupid.

Your wheels can't be 25mm wider/thinner than the widest wheel specified by the manufacturer for that vehicle, you can't increase/decrease the car's total track by 25mm, etc.

If you want to keep your car 100% legal, don't modify your car at all. Any modification will be illegal unless you get some engineers certificate.

Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3821942
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...